Search
Total
21119 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2018-15392 | 1 Cisco | 1 Industrial Network Director | 2019-10-09 | 3.3 LOW | 4.3 MEDIUM |
| A vulnerability in the DHCP service of Cisco Industrial Network Director could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper handling of DHCP lease requests. An attacker could exploit this vulnerability by sending malicious DHCP lease requests to an affected application. A successful exploit could allow the attacker to cause the DHCP service to terminate, resulting in a DoS condition. | |||||
| CVE-2018-15372 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 4.8 MEDIUM | 8.1 HIGH |
| A vulnerability in the MACsec Key Agreement (MKA) using Extensible Authentication Protocol-Transport Layer Security (EAP-TLS) functionality of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to bypass authentication and pass traffic through a Layer 3 interface of an affected device. The vulnerability is due to a logic error in the affected software. An attacker could exploit this vulnerability by connecting to and passing traffic through a Layer 3 interface of an affected device, if the interface is configured for MACsec MKA using EAP-TLS and is running in access-session closed mode. A successful exploit could allow the attacker to bypass 802.1x network access controls and gain access to the network. | |||||
| CVE-2018-15370 | 1 Cisco | 1 Ios Rom Monitor | 2019-10-09 | 4.6 MEDIUM | 6.8 MEDIUM |
| A vulnerability in Cisco IOS ROM Monitor (ROMMON) Software for Cisco Catalyst 6800 Series Switches could allow an unauthenticated, local attacker to bypass Cisco Secure Boot validation checks and load a compromised software image on an affected device. The vulnerability is due to the presence of a hidden command in the affected software. An attacker could exploit this vulnerability by connecting to an affected device via the console, forcing the device into ROMMON mode, and writing a malicious pattern to a specific memory address on the device. A successful exploit could allow the attacker to bypass signature validation checks by Cisco Secure Boot technology and load a compromised software image on the affected device. A compromised software image is any software image that has not been digitally signed by Cisco. | |||||
| CVE-2018-13283 | 1 Synology | 1 Ssl Vpn Client | 2019-10-09 | 5.8 MEDIUM | 7.4 HIGH |
| Lack of administrator control over security vulnerability in client.cgi in Synology SSL VPN Client before 1.2.5-0226 allows remote attackers to conduct man-in-the-middle attacks via the (1) command, (2) hostname, or (3) port parameter. | |||||
| CVE-2018-12550 | 1 Eclipse | 1 Mosquitto | 2019-10-09 | 6.8 MEDIUM | 8.1 HIGH |
| When Eclipse Mosquitto version 1.0 to 1.5.5 (inclusive) is configured to use an ACL file, and that ACL file is empty, or contains only comments or blank lines, then Mosquitto will treat this as though no ACL file has been defined and use a default allow policy. The new behaviour is to have an empty ACL file mean that all access is denied, which is not a useful configuration but is not unexpected. | |||||
| CVE-2018-13804 | 1 Siemens | 3 Simatic It Line Monitoring System, Simatic It Production Suite, Simatic It Ua Discrete Manufacturing | 2019-10-09 | 9.3 HIGH | 8.1 HIGH |
| A vulnerability has been identified in SIMATIC IT LMS (All versions), SIMATIC IT Production Suite (Versions V7.1 < V7.1 Upd3), SIMATIC IT UA Discrete Manufacturing (Versions < V1.2), SIMATIC IT UA Discrete Manufacturing (Versions V1.2), SIMATIC IT UA Discrete Manufacturing (Versions V1.3), SIMATIC IT UA Discrete Manufacturing (Versions V2.3), SIMATIC IT UA Discrete Manufacturing (Versions V2.4). An attacker with network access to the installation could bypass the application-level authentication. In order to exploit the vulnerability, an attacker must obtain network access to an affected installation and must obtain a valid username to the system. Successful exploitation requires no user privileges and no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this vulnerability was known. | |||||
| CVE-2018-13799 | 1 Siemens | 1 Simatic Wincc Open Architecture | 2019-10-09 | 6.4 MEDIUM | 9.1 CRITICAL |
| A vulnerability has been identified in SIMATIC WinCC OA V3.14 and prior (All versions < V3.14-P021). Improper access control to a data point of the affected product could allow an unauthenticated remote user to escalate its privileges in the context of SIMATIC WinCC OA V3.14. This vulnerability could be exploited by an attacker with network access to port 5678/TCP of the SIMATIC WinCC OA V3.14 server. Successful exploitation requires no user privileges and no user interaction. This vulnerability could allow an attacker to compromise integrity and availability of the SIMATIC WinCC OA system. At the time of advisory publication no public exploitation of this vulnerability was known. | |||||
| CVE-2018-13298 | 1 Synology | 1 Moments | 2019-10-09 | 6.8 MEDIUM | 8.1 HIGH |
| Channel accessible by non-endpoint vulnerability in privacy page in Synology Android Moments before 1.2.3-199 allows man-in-the-middle attackers to execute arbitrary code via unspecified vectors. | |||||
| CVE-2018-11456 | 1 Siemens | 1 Automation License Manager | 2019-10-09 | 5.0 MEDIUM | 5.8 MEDIUM |
| A vulnerability has been identified in Automation License Manager 5 (All versions < 5.3.4.4). An attacker with network access to the device could send specially crafted network packets to determine whether or not a network port on another remote system is accessible or not. This allows the attacker to do basic network scanning using the victims machine. Successful exploitation requires a network connection to the affected device. The attacker does not need privileges, no user interaction is required. The impact is limited to determining whether or not a port on a target system is accessible by the affected device. | |||||
| CVE-2018-11462 | 1 Siemens | 10 Sinumerik 808d V4.7, Sinumerik 808d V4.7 Firmware, Sinumerik 808d V4.8 and 7 more | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). By sending a specially crafted authentication request to the affected systems a remote attacker could escalate his privileges to an elevated user account but not to root. The security vulnerability could be exploited by an attacker with network access to the affected systems. Successful exploitation requires no privileges and no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known. | |||||
| CVE-2018-11060 | 1 Rsa | 1 Archer | 2019-10-09 | 6.5 MEDIUM | 8.8 HIGH |
| RSA Archer, versions prior to 6.4.0.1, contain an authorization bypass vulnerability in the REST API. A remote authenticated malicious Archer user could potentially exploit this vulnerability to elevate their privileges. | |||||
| CVE-2018-11466 | 1 Siemens | 10 Sinumerik 808d V4.7, Sinumerik 808d V4.7 Firmware, Sinumerik 808d V4.8 and 7 more | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). Specially crafted network packets sent to port 102/tcp (ISO-TSAP) could allow a remote attacker to either cause a Denial-of-Service condition of the integrated software firewall or allow to execute code in the context of the software firewall. The security vulnerability could be exploited by an attacker with network access to the affected systems on port 102/tcp. Successful exploitation requires no user privileges and no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known | |||||
| CVE-2018-11458 | 1 Siemens | 6 Sinumerik 828d V4.7, Sinumerik 828d V4.7 Firmware, Sinumerik 840d Sl V4.7 and 3 more | 2019-10-09 | 9.3 HIGH | 8.1 HIGH |
| A vulnerability has been identified in SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). The integrated VNC server on port 5900/tcp of the affected products could allow a remote attacker to execute code with privileged permissions on the system by sending specially crafted network requests to port 5900/tcp. Please note that this vulnerability is only exploitable if port 5900/tcp is manually opened in the firewall configuration of network port X130. The security vulnerability could be exploited by an attacker with network access to the affected devices and port. Successful exploitation requires no privileges and no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the VNC server. At the time of advisory publication no public exploitation of this security vulnerability was known. | |||||
| CVE-2018-11081 | 1 Pivotal Software | 1 Operations Manager | 2019-10-09 | 4.0 MEDIUM | 8.8 HIGH |
| Pivotal Operations Manager, versions 2.2.x prior to 2.2.1, 2.1.x prior to 2.1.11, 2.0.x prior to 2.0.16, and 1.11.x prior to 2, fails to write the Operations Manager UAA config onto the temp RAM disk, thus exposing the configs directly onto disk. A remote user that has gained access to the Operations Manager VM, can now file search and find the UAA credentials for Operations Manager on the system disk.. | |||||
| CVE-2018-11460 | 1 Siemens | 10 Sinumerik 808d V4.7, Sinumerik 808d V4.7 Firmware, Sinumerik 808d V4.8 and 7 more | 2019-10-09 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). A local attacker with elevated user privileges (manufact) could modify a CRAMFS archive so that after reboot the system loads the modified CRAMFS file and attacker-controlled code is executed with root privileges. The security vulnerability could be exploited by an attacker with local access to the affected systems. Successful exploitation requires elevated user privileges (manufact) but no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known. | |||||
| CVE-2018-11459 | 1 Siemens | 10 Sinumerik 808d V4.7, Sinumerik 808d V4.7 Firmware, Sinumerik 808d V4.8 and 7 more | 2019-10-09 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). A local attacker could modify a user-writeable configuration file so that after reboot or manual initiation the system reloads the modified configuration file and attacker-controlled code is executed with elevated privileges. The security vulnerability could be exploited by an attacker with local access to the affected system. Successful exploitation requires user privileges but no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known. | |||||
| CVE-2018-11061 | 1 Emc | 2 Rsa Netwitness, Rsa Security Analytics | 2019-10-09 | 9.0 HIGH | 9.1 CRITICAL |
| RSA NetWitness Platform versions prior to 11.1.0.2 and RSA Security Analytics versions prior to 10.6.6 are vulnerable to a server-side template injection vulnerability due to insecure configuration of the template engine used in the product. A remote authenticated malicious RSA NetWitness Server user with an Admin or Operator role could exploit this vulnerability to execute arbitrary commands on the server with root privileges. | |||||
| CVE-2018-11614 | 1 Samsung | 1 Samsung Members | 2019-10-09 | 6.5 MEDIUM | 8.8 HIGH |
| This vulnerability allows remote attackers to escalate privileges on vulnerable installations of Samsung Members Fixed in version 2.4.25. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the handling of Intents. The issue lies in the ability to send an Intent that would not otherwise be reachable. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the application. Was ZDI-CAN-5361. | |||||
| CVE-2018-11449 | 1 Siemens | 2 Scalance M875, Scalance M875 Firmware | 2019-10-09 | 2.1 LOW | 7.8 HIGH |
| A vulnerability has been identified in SCALANCE M875 (All versions). An attacker with access to the local file system might obtain passwords for administrative users. Successful exploitation requires read access to files on the local file system. A successful attack could allow an attacker to obtain administrative passwords. At the time of advisory publication no public exploitation of this security vulnerability was known. | |||||
| CVE-2018-11457 | 1 Siemens | 6 Sinumerik 828d V4.7, Sinumerik 828d V4.7 Firmware, Sinumerik 840d Sl V4.7 and 3 more | 2019-10-09 | 9.3 HIGH | 8.1 HIGH |
| A vulnerability has been identified in SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). The integrated web server on port 4842/tcp of the affected products could allow a remote attacker to execute code with privileged permissions on the system by sending specially crafted network requests to port 4842/tcp. Please note that this vulnerability is only exploitable if port 4842/tcp is manually opened in the firewall configuration of network port X130. The security vulnerability could be exploited by an attacker with network access to the affected devices on port 4842/tcp. Successful exploitation requires no privileges and no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the web server. At the time of advisory publication no public exploitation of this security vulnerability was known. | |||||
| CVE-2018-12410 | 1 Tibco | 1 Spotfire Statistics Services | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| The web server component of TIBCO Software Inc's Spotfire Statistics Services contains multiple vulnerabilities that may allow the remote execution of code. Without needing to authenticate, an attacker may be able to remotely execute code with the permissions of the system account used to run the web server component. Affected releases are TIBCO Software Inc. TIBCO Spotfire Statistics Services versions up to and including 7.11.0. | |||||
| CVE-2018-11464 | 1 Siemens | 4 Sinumerik 828d, Sinumerik 828d Firmware, Sinumerik 840d Sl and 1 more | 2019-10-09 | 4.3 MEDIUM | 3.7 LOW |
| A vulnerability has been identified in SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). The integrated VNC server on port 5900/tcp of the affected products could allow a remote attacker to cause a Denial-of-Service condition of the VNC server. Please note that this vulnerability is only exploitable if port 5900/tcp is manually opened in the firewall configuration of network port X130. The security vulnerability could be exploited by an attacker with network access to the affected devices and port. Successful exploitation requires no privileges and no user interaction. The vulnerability could allow an attacker to compromise availability of the VNC server. At the time of advisory publication no public exploitation of this security vulnerability was known. | |||||
| CVE-2018-11461 | 1 Siemens | 10 Sinumerik 808d V4.7, Sinumerik 808d V4.7 Firmware, Sinumerik 808d V4.8 and 7 more | 2019-10-09 | 4.6 MEDIUM | 6.6 MEDIUM |
| A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). A local attacker with user privileges could use the service command application for privilege escalation to an elevated user but not root. The security vulnerability could be exploited by an attacker with local access to the affected systems. Successful exploitation requires user privileges but no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known. | |||||
| CVE-2018-11084 | 1 Cloudfoundry | 1 Garden-runc | 2019-10-09 | 5.5 MEDIUM | 6.5 MEDIUM |
| Cloud Foundry Garden-runC release, versions prior to 1.16.1, prevents deletion of some app environments based on file attributes. A remote authenticated malicious user may create and delete apps with crafted file attributes to cause a denial of service for new app instances or scaling up of existing apps. | |||||
| CVE-2018-10910 | 2 Bluez, Canonical | 2 Bluez, Ubuntu Linux | 2019-10-09 | 2.1 LOW | 3.3 LOW |
| A bug in Bluez may allow for the Bluetooth Discoverable state being set to on when no Bluetooth agent is registered with the system. This situation could lead to the unauthorized pairing of certain Bluetooth devices without any form of authentication. Versions before bluez 5.51 are vulnerable. | |||||
| CVE-2018-0476 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 7.1 HIGH | 5.9 MEDIUM |
| A vulnerability in the Network Address Translation (NAT) Session Initiation Protocol (SIP) Application Layer Gateway (ALG) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper processing of SIP packets in transit while NAT is performed on an affected device. An unauthenticated, remote attacker could exploit this vulnerability by sending crafted SIP packets via UDP port 5060 through an affected device that is performing NAT for SIP packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition. | |||||
| CVE-2018-1002101 | 1 Kubernetes | 1 Kubernetes | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| In Kubernetes versions 1.9.0-1.9.9, 1.10.0-1.10.5, and 1.11.0-1.11.1, user input was handled insecurely while setting up volume mounts on Windows nodes, which could lead to command line argument injection. | |||||
| CVE-2018-10500 | 1 Samsung | 1 Galaxy Apps | 2019-10-09 | 4.4 MEDIUM | 7.0 HIGH |
| This vulnerability allows local attackers to escalate privileges on vulnerable installations of Samsung Galaxy Apps Fixed in version 6.4.0.15. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the handling of push messages. The issue lies in the ability to start an activity with controlled arguments. An attacker can leverage this vulnerability to escalate privileges to resources normally protected from the application. Was ZDI-CAN-5331. | |||||
| CVE-2018-0412 | 1 Cisco | 16 Wap121, Wap121 Firmware, Wap125 and 13 more | 2019-10-09 | 2.9 LOW | 5.3 MEDIUM |
| A vulnerability in the implementation of Extensible Authentication Protocol over LAN (EAPOL) functionality in Cisco Small Business 100 Series Wireless Access Points and Cisco Small Business 300 Series Wireless Access Points could allow an unauthenticated, adjacent attacker to force the downgrade of the encryption algorithm that is used between an authenticator (access point) and a supplicant (Wi-Fi client). The vulnerability is due to the improper processing of certain EAPOL messages that are received during the Wi-Fi handshake process. An attacker could exploit this vulnerability by establishing a man-in-the-middle position between a supplicant and an authenticator and manipulating an EAPOL message exchange to force usage of a WPA-TKIP cipher instead of the more secure AES-CCMP cipher. A successful exploit could allow the attacker to conduct subsequent cryptographic attacks, which could lead to the disclosure of confidential information. Cisco Bug IDs: CSCvj29229. | |||||
| CVE-2018-0455 | 1 Cisco | 1 Firepower System Software | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the Server Message Block Version 2 (SMBv2) and Version 3 (SMBv3) protocol implementation for the Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause the device to run low on system memory, possibly preventing the device from forwarding traffic. It is also possible that a manual reload of the device may be required to clear the condition. The vulnerability is due to incorrect SMB header validation. An attacker could exploit this vulnerability by sending a custom SMB file transfer through the targeted device. A successful exploit could cause the device to consume an excessive amount of system memory and prevent the SNORT process from forwarding network traffic. This vulnerability can be exploited using either IPv4 or IPv6 in combination with SMBv2 or SMBv3 network traffic. | |||||
| CVE-2018-0457 | 1 Cisco | 1 Webex Meetings Online | 2019-10-09 | 4.3 MEDIUM | 5.5 MEDIUM |
| A vulnerability in the Cisco Webex Player for Webex Recording Format (WRF) files could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. An attacker could exploit this vulnerability by sending a user a link or email attachment with a malicious WRF file and persuading the user to open the file in the Cisco Webex Player. A successful exploit could cause the affected player to crash, resulting in a DoS condition. For more information about this vulnerability, see the Details section of this security advisory. | |||||
| CVE-2018-0463 | 1 Cisco | 1 Network Services Orchestrator | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the Cisco Network Plug and Play server component of Cisco Network Services Orchestrator (NSO) could allow an unauthenticated, remote attacker to gain unauthorized access to configuration data that is stored on an affected NSO system. The vulnerability exists because the Network Plug and Play component performs incomplete validation when configured to use secure unique device identifiers (SUDI) for authentication. An attacker who controls a Cisco device that supports SUDI authentication and has connectivity to an affected NSO system could exploit this vulnerability. The attacker would need to leverage information about the devices that are being registered on the NSO server to send crafted Cisco Network Plug and Play authentication packets to an affected system. A successful exploit could allow the attacker to gain unauthorized access to configuration data for devices that will be managed by the NSO system. | |||||
| CVE-2018-0484 | 1 Cisco | 1 Ios | 2019-10-09 | 4.0 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the access control logic of the Secure Shell (SSH) server of Cisco IOS and IOS XE Software may allow connections sourced from a virtual routing and forwarding (VRF) instance despite the absence of the vrf-also keyword in the access-class configuration. The vulnerability is due to a missing check in the SSH server. An attacker could use this vulnerability to open an SSH connection to an affected Cisco IOS or IOS XE device with a source address belonging to a VRF instance. Once connected, the attacker would still need to provide valid credentials to access the device. | |||||
| CVE-2018-0189 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 7.1 HIGH | 5.3 MEDIUM |
| A vulnerability in the Forwarding Information Base (FIB) code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, network attacker to cause a denial of service (DoS) condition. The vulnerability is due to a limitation in the way the FIB is internally representing recursive routes. An attacker could exploit this vulnerability by injecting routes into the routing protocol that have a specific recursive pattern. The attacker must be in a position on the network that provides the ability to inject a number of recursive routes with a specific pattern. An exploit could allow the attacker to cause an affected device to reload, creating a DoS condition. Cisco Bug IDs: CSCva91655. | |||||
| CVE-2018-0180 | 1 Cisco | 13 1921, 1941, 1941w and 10 more | 2019-10-09 | 7.1 HIGH | 5.9 MEDIUM |
| Multiple vulnerabilities in the Login Enhancements (Login Block) feature of Cisco IOS Software could allow an unauthenticated, remote attacker to trigger a reload of an affected system, resulting in a denial of service (DoS) condition. These vulnerabilities affect Cisco devices that are running Cisco IOS Software Release 15.4(2)T, 15.4(3)M, or 15.4(2)CG and later. Cisco Bug IDs: CSCuy32360, CSCuz60599. | |||||
| CVE-2018-0294 | 1 Cisco | 74 Firepower 4110, Firepower 4120, Firepower 4140 and 71 more | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the write-erase feature of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to configure an unauthorized administrator account for an affected device. The vulnerability exists because the affected software does not properly delete sensitive files when certain CLI commands are used to clear the device configuration and reload a device. An attacker could exploit this vulnerability by logging into an affected device as an administrative user and configuring an unauthorized account for the device. The account would not require a password for authentication and would be accessible only via a Secure Shell (SSH) connection to the device. A successful exploit could allow the attacker to configure an unauthorized account that has administrative privileges, does not require a password for authentication, and does not appear in the running configuration or the audit logs for the affected device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3500 Platform Switches, Nexus 4000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd13993, CSCvd34845, CSCvd34857, CSCvd34862, CSCvd34879, CSCve35753. | |||||
| CVE-2018-0332 | 1 Cisco | 27 Ip Phone 7811, Ip Phone 7821, Ip Phone 7841 and 24 more | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the Session Initiation Protocol (SIP) ingress packet processing of Cisco Unified IP Phone software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms in the software. An attacker could exploit this vulnerability by sending high volumes of SIP INVITE traffic to the targeted device. Successful exploitation could allow the attacker to cause a disruption of services on the targeted IP phone. Cisco Bug IDs: CSCve10064, CSCve14617, CSCve14638, CSCve14683, CSCve20812, CSCve20926, CSCve20945. | |||||
| CVE-2018-0353 | 1 Cisco | 1 Web Security Appliance | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in traffic-monitoring functions in Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to circumvent Layer 4 Traffic Monitor (L4TM) functionality and bypass security protections. The vulnerability is due to a change in the underlying operating system software that is responsible for monitoring affected traffic. An attacker could exploit this vulnerability by sending crafted IP packets to an affected device. A successful exploit could allow the attacker to pass traffic through the device, which the WSA was configured to deny. This vulnerability affects both IPv4 and IPv6 traffic. This vulnerability affects Cisco AsyncOS versions for WSA on both virtual and hardware appliances running any release of the 10.5.1, 10.5.2, or 11.0.0 WSA Software. The WSA is vulnerable if it is configured for L4TM. Cisco Bug IDs: CSCvg78875. | |||||
| CVE-2018-0368 | 1 Cisco | 1 Application Policy Infrastructure Controller Enterprise Module | 2019-10-09 | 2.1 LOW | 7.8 HIGH |
| A vulnerability in Cisco Digital Network Architecture (DNA) Center could allow an authenticated, local attacker to access sensitive information on an affected system. The vulnerability is due to insufficient security restrictions imposed by the affected software. An attacker could exploit this vulnerability by accessing unprotected log files. A successful exploit could allow the attacker to access sensitive log files, which may include system credentials, on the affected device. Cisco Bug IDs: CSCvi22400. | |||||
| CVE-2018-0262 | 1 Cisco | 1 Meeting Server | 2019-10-09 | 6.8 MEDIUM | 8.1 HIGH |
| A vulnerability in Cisco Meeting Server could allow an unauthenticated, remote attacker to gain unauthorized access to components of, or sensitive information in, an affected system, leading to Remote Code Execution. The vulnerability is due to incorrect default configuration of the device, which can expose internal interfaces and ports on the external interface of the system. A successful exploit could allow the attacker to gain unauthenticated access to configuration and database files as well as sensitive meeting information on an affected system. Additionally, if the Traversal Using Relay NAT (TURN) service is enabled and utilizing Transport Layer Security (TLS) connections, an attacker could utilize TURN credentials to forward traffic to device daemons, allowing for remote exploitation. This vulnerability affects Cisco Meeting Server (CMS) Acano X-series platforms that are running a CMS Software release prior to 2.2.11. Cisco Bug IDs: CSCvg76469. | |||||
| CVE-2018-0370 | 1 Cisco | 1 Firepower Management Center | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause one of the detection engine processes to run out of memory and thus slow down traffic processing. The vulnerability is due to improper handling of traffic when the Secure Sockets Layer (SSL) inspection policy is enabled. An attacker could exploit this vulnerability by sending malicious traffic through an affected device. An exploit could allow the attacker to increase the resource consumption of a single instance of the Snort detection engine on an affected device. This will lead to performance degradation and eventually the restart of the affected Snort process. Cisco Bug IDs: CSCvi09219, CSCvi29845. | |||||
| CVE-2018-0380 | 1 Cisco | 1 Webex Meetings Online | 2019-10-09 | 4.3 MEDIUM | 5.5 MEDIUM |
| Multiple vulnerabilities exist in the Cisco Webex Network Recording Player for Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit these vulnerabilities by providing a user with a malicious .arf or .wrf file via email or URL and convincing the user to launch the file in the Webex recording players. Exploitation of these vulnerabilities could cause an affected player to crash, resulting in a denial of service (DoS) condition. The Cisco Webex players are applications that are used to play back Webex meetings that have been recorded by an online meeting attendee. The Webex Network Recording Player for .arf files can be automatically installed when the user accesses a recording that is hosted on a Webex server. The Webex Player for .wrf files can be downloaded manually. These vulnerabilities affect ARF and WRF recording players available from Cisco Webex Meetings Suite sites, Cisco Webex Meetings Online sites, and Cisco Webex Meetings Server. Cisco Bug IDs: CSCvh70253, CSCvh70268, CSCvh72272, CSCvh72281, CSCvh72285, CSCvi60477, CSCvi60485, CSCvi60490, CSCvi60520, CSCvi60529, CSCvi60533. | |||||
| CVE-2018-0389 | 1 Cisco | 2 Spa514g, Spa514g Firmware | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the implementation of Session Initiation Protocol (SIP) processing in Cisco Small Business SPA514G IP Phones could allow an unauthenticated, remote attacker to cause an affected device to become unresponsive, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of SIP request messages by an affected device. An attacker could exploit this vulnerability by sending crafted SIP messages to an affected device. A successful exploit could allow the attacker to cause the affected device to become unresponsive, resulting in a DoS condition that persists until the device is restarted manually. Cisco has not released software updates that address this vulnerability. This vulnerability affects Cisco Small Business SPA514G IP Phones that are running firmware release 7.6.2SR2 or earlier. | |||||
| CVE-2018-0290 | 1 Cisco | 1 Socialminer | 2019-10-09 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the TCP stack of Cisco SocialMiner could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition in the notification system. The vulnerability is due to faulty handling of new TCP connections to the affected application. An attacker could exploit this vulnerability by sending a malicious TCP packet to the vulnerable service. An exploit could allow the attacker to create a DoS condition by interrupting certain phone services. A manual restart of the service may be required to restore full functionalities. Cisco Bug IDs: CSCvh48368. | |||||
| CVE-2018-0257 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 3.3 LOW | 4.3 MEDIUM |
| A vulnerability in Cisco IOS XE Software running on Cisco cBR Series Converged Broadband Routers could allow an unauthenticated, adjacent attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect handling of certain DHCP packets. An attacker could exploit this vulnerability by sending certain DHCP packets to a specific segment of an affected device. A successful exploit could allow the attacker to increase CPU usage on the affected device and cause a DoS condition. Cisco Bug IDs: CSCvg73687. | |||||
| CVE-2018-0391 | 1 Cisco | 2 Prime Collaboration, Prime Collaboration Provisioning | 2019-10-09 | 6.8 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the password change function of Cisco Prime Collaboration Provisioning could allow an authenticated, remote attacker to cause the system to become inoperable. The vulnerability is due to insufficient validation of a password change request. An attacker could exploit this vulnerability by changing a specific administrator account password. A successful exploit could allow the attacker to cause the affected device to become inoperable, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 12.2 and prior. Cisco Bug IDs: CSCvd86586. | |||||
| CVE-2018-0241 | 1 Cisco | 9 Asr 9001, Asr 9006, Asr 9010 and 6 more | 2019-10-09 | 6.1 MEDIUM | 7.4 HIGH |
| A vulnerability in the UDP broadcast forwarding function of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of UDP broadcast packets that are forwarded to an IPv4 helper address. An attacker could exploit this vulnerability by sending multiple UDP broadcast packets to the affected device. An exploit could allow the attacker to cause a buffer leak on the affected device, eventually resulting in a DoS condition requiring manual intervention to recover. This vulnerability affects all Cisco IOS XR platforms running 6.3.1, 6.2.3, or earlier releases of Cisco IOS XR Software when at least one IPv4 helper address is configured on an interface of the device. Cisco Bug IDs: CSCvi35625. | |||||
| CVE-2018-0226 | 1 Cisco | 1 Mobility Express Software | 2019-10-09 | 6.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the assignment and management of default user accounts for Secure Shell (SSH) access to Cisco Aironet 1800, 2800, and 3800 Series Access Points that are running Cisco Mobility Express Software could allow an authenticated, remote attacker to gain elevated privileges on an affected access point. The vulnerability exists because the Cisco Mobility Express controller of the affected software configures the default SSH user account for an access point to be the first SSH user account that was created for the Mobility Express controller, if an administrator added user accounts directly to the controller instead of using the default configuration or the SSH username creation wizard. Although the user account has read-only privileges for the Mobility Express controller, the account could have administrative privileges for an associated access point. An attacker who has valid user credentials for an affected controller could exploit this vulnerability by using the default SSH user account to authenticate to an affected access point via SSH. A successful exploit could allow the attacker to log in to the affected access point with administrative privileges and perform arbitrary administrative actions. This vulnerability affects the following Cisco products: Aironet 1800 Series Access Points that are running Cisco Mobility Express Software Releases 8.2.121.0 through 8.5.105.0, Aironet 2800 Series Access Points that are running Cisco Mobility Express Software Releases 8.3.102.0 through 8.5.105.0, Aironet 3800 Series Access Points that are running Cisco Mobility Express Software Releases 8.3.102.0 through 8.5.105.0. Cisco Bug IDs: CSCva68116. | |||||
| CVE-2018-0273 | 1 Cisco | 4 Asr 5000, Asr 5500, Asr 5700 and 1 more | 2019-10-09 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the IPsec Manager of Cisco StarOS for Cisco Aggregation Services Router (ASR) 5000 Series Routers and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to terminate all active IPsec VPN tunnels and prevent new tunnels from being established, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of corrupted Internet Key Exchange Version 2 (IKEv2) messages. An attacker could exploit this vulnerability by sending crafted IKEv2 messages toward an affected router. A successful exploit could allow the attacker to cause the ipsecmgr service to reload. A reload of this service could cause all IPsec VPN tunnels to be terminated and prevent new tunnels from being established until the service has restarted, resulting in a DoS condition. This vulnerability affects the following Cisco products when they are running Cisco StarOS: Cisco Aggregation Services Router (ASR) 5000 Series Routers, Virtualized Packet Core (VPC) System Software. Cisco Bug IDs: CSCve29605. | |||||
| CVE-2018-0393 | 1 Cisco | 6 Mobility Services Engine 3310, Mobility Services Engine 3310 Firmware, Mobility Services Engine 3355 and 3 more | 2019-10-09 | 4.0 MEDIUM | 6.5 MEDIUM |
| A Read-Only User Effect Change vulnerability in the Policy Builder interface of Cisco Policy Suite could allow an authenticated, remote attacker to make policy changes in the Policy Builder interface. The vulnerability is due to insufficient authorization controls. An attacker could exploit this vulnerability by accessing the Policy Builder interface and modifying an HTTP request. A successful exploit could allow the attacker to make changes to existing policies. Cisco Bug IDs: CSCvi35007. | |||||