Search
Total
21119 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2018-0203 | 1 Cisco | 1 Unity Connection | 2019-10-09 | 5.0 MEDIUM | 5.3 MEDIUM |
| A vulnerability in the SMTP relay of Cisco Unity Connection could allow an unauthenticated, remote attacker to send unsolicited email messages, aka a Mail Relay Vulnerability. The vulnerability is due to improper handling of domain information in the affected software. An unauthenticated, remote attacker could exploit this vulnerability by sending crafted requests to the targeted application. A successful exploit could allow the attacker to send email messages to arbitrary addresses. Cisco Bug IDs: CSCvg62215. | |||||
| CVE-2018-0275 | 1 Cisco | 1 Identity Services Engine | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the support tunnel feature of Cisco Identity Services Engine (ISE) could allow an authenticated, local attacker to access the device's shell. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by tricking the device into unlocking the support user account and accessing the tunnel password and device serial number. A successful exploit could allow the attacker to run any system command with root access. This affects Cisco Identity Services Engine (ISE) software versions prior to 2.2.0.470. Cisco Bug IDs: CSCvf54409. | |||||
| CVE-2018-0397 | 2 Apple, Cisco | 2 Mac Os X, Advanced Malware Protection For Endpoints | 2019-10-09 | 7.1 HIGH | 5.9 MEDIUM |
| A vulnerability in Cisco AMP for Endpoints Mac Connector Software installed on Apple macOS 10.12 could allow an unauthenticated, remote attacker to cause a kernel panic on an affected system, resulting in a denial of service (DoS) condition. The vulnerability exists if the affected software is running in Block network conviction mode. Exploitation could occur if the system that is running the affected software starts a server process and an address in the IP blacklist cache of the affected software attempts to connect to the affected system. A successful exploit could allow the attacker to cause a kernel panic on the system that is running the affected software, resulting in a DoS condition. Cisco Bug IDs: CSCvk08192. | |||||
| CVE-2018-0025 | 1 Juniper | 21 Junos, Srx100, Srx110 and 18 more | 2019-10-09 | 4.3 MEDIUM | 8.1 HIGH |
| When an SRX Series device is configured to use HTTP/HTTPS pass-through authentication services, a client sending authentication credentials in the initial HTTP/HTTPS session is at risk that these credentials may be captured during follow-on HTTP/HTTPS requests by a malicious actor through a man-in-the-middle attack or by authentic servers subverted by malicious actors. FTP, and Telnet pass-through authentication services are not affected. Affected releases are Juniper Networks SRX Series: 12.1X46 versions prior to 12.1X46-D67 on SRX Series; 12.3X48 versions prior to 12.3X48-D25 on SRX Series; 15.1X49 versions prior to 15.1X49-D35 on SRX Series. | |||||
| CVE-2018-0026 | 1 Juniper | 1 Junos | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| After Junos OS device reboot or upgrade, the stateless firewall filter configuration may not take effect. This issue can be verified by running the command: user@re0> show interfaces <interface_name> extensive | match filters" CAM destination filters: 0, CAM source filters: 0 Note: when the issue occurs, it does not show the applied firewall filter. The correct output should show the applied firewall filter, for example: user@re0> show interfaces <interface_name> extensive | match filters" CAM destination filters: 0, CAM source filters: 0 Input Filters: FIREWAL_FILTER_NAME-<interface_name> This issue affects firewall filters for every address family. Affected releases are Juniper Networks Junos OS: 15.1R4, 15.1R5, 15.1R6 and SRs based on these MRs. 15.1X8 versions prior to 15.1X8.3. | |||||
| CVE-2018-0035 | 1 Juniper | 3 Junos, Qfx10002, Qfx5200 | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| QFX5200 and QFX10002 devices that have been shipped with Junos OS 15.1X53-D21, 15.1X53-D30, 15.1X53-D31, 15.1X53-D32, 15.1X53-D33 and 15.1X53-D60 or have been upgraded to these releases using the .bin or .iso images may contain an unintended additional Open Network Install Environment (ONIE) partition. This additional partition allows the superuser to reboot to the ONIE partition which will wipe out the content of the Junos partition and its configuration. Once rebooted, the ONIE partition will not have root password configured, thus any user can access the console or SSH, using an IP address acquired from DHCP, as root without password. Once the device has been shipped or upgraded with the ONIE partition installed, the issue will persist. Simply upgrading to higher release via the CLI will not resolve the issue. No other Juniper Networks products or platforms are affected by this issue. | |||||
| CVE-2018-0057 | 1 Juniper | 1 Junos | 2019-10-09 | 5.5 MEDIUM | 9.6 CRITICAL |
| On MX Series and M120/M320 platforms configured in a Broadband Edge (BBE) environment, subscribers logging in with DHCP Option 50 to request a specific IP address will be assigned the requested IP address, even if there is a static MAC to IP address binding in the access profile. In the problem scenario, with a hardware-address and IP address configured under address-assignment pool, if a subscriber logging in with DHCP Option 50, the subscriber will not be assigned an available address from the matched pool, but will still get the requested IP address. A malicious DHCP subscriber may be able to utilize this vulnerability to create duplicate IP address assignments, leading to a denial of service for valid subscribers or unauthorized information disclosure via IP address assignment spoofing. Affected releases are Juniper Networks Junos OS: 15.1 versions prior to 15.1R7-S2, 15.1R8; 16.1 versions prior to 16.1R4-S12, 16.1R7-S2, 16.1R8; 16.2 versions prior to 16.2R2-S7, 16.2R3; 17.1 versions prior to 17.1R2-S9, 17.1R3; 17.2 versions prior to 17.2R1-S7, 17.2R2-S6, 17.2R3; 17.3 versions prior to 17.3R2-S4, 17.3R3; 17.4 versions prior to 17.4R2; 18.1 versions prior to 18.1R2-S3, 18.1R3. | |||||
| CVE-2018-0095 | 1 Cisco | 1 Asyncos | 2019-10-09 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the administrative shell of Cisco AsyncOS on Cisco Email Security Appliance (ESA) and Content Security Management Appliance (SMA) could allow an authenticated, local attacker to escalate their privilege level and gain root access. The attacker has to have a valid user credential with at least a privilege level of a guest user. The vulnerability is due to an incorrect networking configuration at the administrative shell CLI. An attacker could exploit this vulnerability by authenticating to the targeted device and issuing a set of crafted, malicious commands at the administrative shell. An exploit could allow the attacker to gain root access on the device. Cisco Bug IDs: CSCvb34303, CSCvb35726. | |||||
| CVE-2018-0119 | 1 Cisco | 1 Conference Director | 2019-10-09 | 6.5 MEDIUM | 4.7 MEDIUM |
| A vulnerability in certain authentication controls in the account services of Cisco Spark could allow an authenticated, remote attacker to interact with and view information on an affected device that would normally be prohibited. The vulnerability is due to the improper display of user-account tokens generated in the system. An attacker could exploit this vulnerability by logging in to the device with a token in use by another account. Successful exploitation could allow the attacker to cause a partial impact to the device's confidentiality, integrity, and availability. Cisco Bug IDs: CSCvg05206. | |||||
| CVE-2018-0154 | 1 Cisco | 1 Ios | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the crypto engine of the Cisco Integrated Services Module for VPN (ISM-VPN) running Cisco IOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient handling of VPN traffic by the affected device. An attacker could exploit this vulnerability by sending crafted VPN traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to hang or crash, resulting in a DoS condition. Cisco Bug IDs: CSCvd39267. | |||||
| CVE-2018-0164 | 1 Cisco | 1 Ios Xe | 2019-10-09 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Switch Integrated Security Features of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an interface queue wedge. The vulnerability is due to incorrect handling of crafted IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv6 packets through the device. An exploit could allow the attacker to cause an interface queue wedge. This vulnerability affects the Cisco cBR-8 Converged Broadband Router, Cisco ASR 1000 Series Aggregation Services Routers, and Cisco Cloud Services Router 1000V Series when configured with IPv6. In the field and internal testing, this vulnerability was only observed or reproduced on the Cisco cBR-8 Converged Broadband Router. The Cisco ASR 1000 Series Aggregation Services Routers and Cisco Cloud Services Router 1000V Series contain the same code logic, so affected trains have had the code fix applied; however, on these two products, the vulnerability has not been observed in the field or successfully reproduced internally. Cisco Bug IDs: CSCvd75185. | |||||
| CVE-2018-0179 | 1 Cisco | 13 1921, 1941, 1941w and 10 more | 2019-10-09 | 7.1 HIGH | 5.9 MEDIUM |
| Multiple vulnerabilities in the Login Enhancements (Login Block) feature of Cisco IOS Software could allow an unauthenticated, remote attacker to trigger a reload of an affected system, resulting in a denial of service (DoS) condition. These vulnerabilities affect Cisco devices that are running Cisco IOS Software Release 15.4(2)T, 15.4(3)M, or 15.4(2)CG and later. Cisco Bug IDs: CSCuy32360, CSCuz60599. | |||||
| CVE-2018-0284 | 1 Cisco | 12 Meraki Mr, Meraki Mr 24 Firmware, Meraki Mr 25 Firmware and 9 more | 2019-10-09 | 4.0 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the local status page functionality of the Cisco Meraki MR, MS, MX, Z1, and Z3 product lines could allow an authenticated, remote attacker to modify device configuration files. The vulnerability occurs when handling requests to the local status page. An exploit could allow the attacker to establish an interactive session to the device with elevated privileges. The attacker could then use the elevated privileges to further compromise the device or obtain additional configuration data from the device that is being exploited. | |||||
| CVE-2017-8444 | 1 Elasticsearch | 1 Cloud Enterprise | 2019-10-09 | 4.3 MEDIUM | 5.9 MEDIUM |
| The client-forwarder in Elastic Cloud Enterprise versions prior to 1.0.2 do not properly encrypt traffic to ZooKeeper. If an attacker is able to man in the middle (MITM) the traffic between the client-forwarder and ZooKeeper they could potentially obtain sensitive data. | |||||
| CVE-2017-9286 | 1 Opensuse | 1 Leap | 2019-10-09 | 9.0 HIGH | 8.8 HIGH |
| The packaging of NextCloud in openSUSE used /srv/www/htdocs in an unsafe manner, which could have allowed scripts running as wwwrun user to escalate privileges to root during nextcloud package upgrade. | |||||
| CVE-2018-0009 | 1 Juniper | 21 Junos, Srx100, Srx110 and 18 more | 2019-10-09 | 4.3 MEDIUM | 5.9 MEDIUM |
| On Juniper Networks SRX series devices, firewall rules configured to match custom application UUIDs starting with zeros can match all TCP traffic. Due to this issue, traffic that should have been blocked by other rules is permitted to flow through the device resulting in a firewall bypass condition. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D71 on SRX series; 12.3X48 versions prior to 12.3X48-D55 on SRX series; 15.1X49 versions prior to 15.1X49-D100 on SRX series. | |||||
| CVE-2017-9942 | 1 Siemens | 1 Sipass Integrated | 2019-10-09 | 2.1 LOW | 7.8 HIGH |
| A vulnerability was discovered in Siemens SiPass integrated (All versions before V2.70) that could allow an attacker with local access to the SiPass integrated server or SiPass integrated client to potentially obtain credentials from the systems. | |||||
| CVE-2017-9941 | 1 Siemens | 1 Sipass Integrated | 2019-10-09 | 5.8 MEDIUM | 7.4 HIGH |
| A vulnerability was discovered in Siemens SiPass integrated (All versions before V2.70) that could allow an attacker in a Man-in-the-Middle position between the SiPass integrated server and SiPass integrated clients to read or modify the network communication. | |||||
| CVE-2017-9277 | 1 Novell | 1 Edirectory | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| The LDAP backend in Novell eDirectory before 9.0 SP4 when switched to EBA (Enhanced Background Authentication) kept open connections without EBA. | |||||
| CVE-2017-9267 | 1 Novell | 1 Edirectory | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| In Novell eDirectory before 9.0.3.1 the LDAP interface was not strictly enforcing cipher restrictions allowing weaker ciphers to be used during SSL BIND operations. | |||||
| CVE-2018-0021 | 1 Juniper | 1 Junos | 2019-10-09 | 3.3 LOW | 8.8 HIGH |
| If all 64 digits of the connectivity association name (CKN) key or all 32 digits of the connectivity association key (CAK) key are not configured, all remaining digits will be auto-configured to 0. Hence, Juniper devices configured with short MacSec keys are at risk to an increased likelihood that an attacker will discover the secret passphrases configured for these keys through dictionary-based and brute-force-based attacks using spoofed packets. Affected releases are Juniper Networks Junos OS: 14.1 versions prior to 14.1R10, 14.1R9; 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D100; 15.1X53 versions prior to 15.1X53-D59; 16.1 versions prior to 16.1R3-S8, 16.1R4-S8, 16.1R5; 16.2 versions prior to 16.2R1-S6, 16.2R2; 17.1 versions prior to 17.1R2. | |||||
| CVE-2018-0016 | 1 Juniper | 1 Junos | 2019-10-09 | 8.5 HIGH | 7.5 HIGH |
| Receipt of a specially crafted Connectionless Network Protocol (CLNP) datagram destined to an interface of a Junos OS device may result in a kernel crash or lead to remote code execution. Devices are only vulnerable to the specially crafted CLNP datagram if 'clns-routing' or ES-IS is explicitly configured. Devices with without CLNS enabled are not vulnerable to this issue. Devices with IS-IS configured on the interface are not vulnerable to this issue unless CLNS routing is also enabled. This issue only affects devices running Junos OS 15.1. Affected releases are Juniper Networks Junos OS: 15.1 versions prior to 15.1F5-S3, 15.1F6-S8, 15.1F7, 15.1R5; 15.1X49 versions prior to 15.1X49-D60; 15.1X53 versions prior to 15.1X53-D66, 15.1X53-D233, 15.1X53-D471. Earlier releases are unaffected by this vulnerability, and the issue has been resolved in Junos OS 16.1R1 and all subsequent releases. | |||||
| CVE-2018-0012 | 1 Juniper | 1 Junos Space | 2019-10-09 | 7.2 HIGH | 7.8 HIGH |
| Junos Space is affected by a privilege escalation vulnerability that may allow a local authenticated attacker to gain root privileges. | |||||
| CVE-2017-7530 | 1 Redhat | 2 Cloudforms, Cloudforms Management Engine | 2019-10-09 | 6.5 MEDIUM | 8.8 HIGH |
| In CloudForms Management Engine (cfme) before 5.7.3 and 5.8.x before 5.8.1, it was found that privilege check is missing when invoking arbitrary methods via filtering on VMs that MiqExpression will execute that is triggerable by API users. An attacker could use this to execute actions they should not be allowed to (e.g. destroying VMs). | |||||
| CVE-2017-7497 | 1 Redhat | 1 Cloudforms Management Engine | 2019-10-09 | 4.0 MEDIUM | 4.3 MEDIUM |
| The dialog for creating cloud volumes (cinder provider) in CloudForms does not filter cloud tenants by user. An attacker with the ability to create storage volumes could use this to create storage volumes for any other tenant. | |||||
| CVE-2017-7540 | 1 Safemode Project | 1 Safemode | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| rubygem-safemode, as used in Foreman, versions 1.3.2 and earlier are vulnerable to bypassing safe mode limitations via special Ruby syntax. This can lead to deletion of objects for which the user does not have delete permissions or possibly to privilege escalation. | |||||
| CVE-2017-6766 | 1 Cisco | 1 Firesight System Software | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the Secure Sockets Layer (SSL) Decryption and Inspection feature of Cisco Firepower System Software 5.4.0, 5.4.1, 6.0.0, 6.1.0, 6.2.0, 6.2.1, and 6.2.2 could allow an unauthenticated, remote attacker to bypass the SSL policy for decrypting and inspecting traffic on an affected system. The vulnerability is due to unexpected interaction with Known Key and Decrypt and Resign configuration settings of SSL policies when the affected software receives unexpected SSL packet headers. An attacker could exploit this vulnerability by sending a crafted SSL packet through an affected device in a valid SSL session. A successful exploit could allow the attacker to bypass the SSL decryption and inspection policy for the affected system, which could allow traffic to flow through the system without being inspected. Cisco Bug IDs: CSCve12652. | |||||
| CVE-2017-6873 | 1 Siemens | 4 Ozw672, Ozw672 Firmware, Ozw772 and 1 more | 2019-10-09 | 5.8 MEDIUM | 7.4 HIGH |
| A vulnerability was discovered in Siemens OZW672 (all versions) and OZW772 (all versions) that could allow an attacker to read and manipulate data in TLS sessions while performing a man-in-the-middle (MITM) attack on the integrated web server on port 443/tcp. | |||||
| CVE-2017-6791 | 1 Cisco | 1 Unified Communications Manager | 2019-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the Trust Verification Service (TVS) of Cisco Unified Communications Manager could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of Transport Layer Security (TLS) traffic by the affected software. An attacker could exploit this vulnerability by generating incomplete traffic streams. A successful exploit could allow the attacker to deny access to the TVS for an affected device, resulting in a DoS condition, until an administrator restarts the service. Known Affected Releases 10.0(1.10000.24) 10.5(2.10000.5) 11.0(1.10000.10) 9.1(2.10000.28). Cisco Bug IDs: CSCux21905. | |||||
| CVE-2017-6866 | 1 Siemens | 1 Xhq Server | 2019-10-09 | 4.0 MEDIUM | 6.5 MEDIUM |
| A vulnerability was discovered in Siemens XHQ server 4 and 5 (4 before V4.7.1.3 and 5 before V5.0.0.2) that could allow an authenticated low-privileged remote user to gain read access to data in the XHQ solution exceeding his configured permission level. | |||||
| CVE-2017-6869 | 1 Siemens | 1 Viewport For Web Office Portal | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability was discovered in Siemens ViewPort for Web Office Portal before revision number 1453 that could allow an unauthenticated remote user to upload arbitrary code and execute it with the permissions of the operating-system user running the web server by sending specially crafted network packets to port 443/TCP or port 80/TCP. | |||||
| CVE-2017-6870 | 1 Siemens | 1 Simatic Wincc Sm\@rtclient | 2019-10-09 | 5.8 MEDIUM | 7.4 HIGH |
| A vulnerability was discovered in Siemens SIMATIC WinCC Sm@rtClient for Android (All versions before V1.0.2.2). The existing TLS protocol implementation could allow an attacker to read and modify data within a TLS session while performing a Man-in-the-Middle (MitM) attack. | |||||
| CVE-2017-7652 | 2 Debian, Eclipse | 2 Debian Linux, Mosquitto | 2019-10-09 | 6.0 MEDIUM | 7.5 HIGH |
| In Eclipse Mosquitto 1.4.14, if a Mosquitto instance is set running with a configuration file, then sending a HUP signal to server triggers the configuration to be reloaded from disk. If there are lots of clients connected so that there are no more file descriptors/sockets available (default limit typically 1024 file descriptors on Linux), then opening the configuration file will fail. | |||||
| CVE-2017-7928 | 1 Selinc | 4 Sel-3620, Sel-3620 Firmware, Sel-3622 and 1 more | 2019-10-09 | 7.5 HIGH | 10.0 CRITICAL |
| An Improper Access Control issue was discovered in Schweitzer Engineering Laboratories (SEL) SEL-3620 and SEL-3622 Security Gateway Versions R202 and, R203, R203-V1, R203-V2 and, R204, R204-V1. The device does not properly enforce access control while configured for NAT port forwarding, which may allow for unauthorized communications to downstream devices. | |||||
| CVE-2017-6016 | 1 Leao Consultoria E Desenvolvimento De Sistemas | 1 Ltda Me Laquis Scada | 2019-10-09 | 4.4 MEDIUM | 7.3 HIGH |
| An Improper Access Control issue was discovered in LCDS - Leao Consultoria e Desenvolvimento de Sistemas LTDA ME LAquis SCADA. The following versions are affected: Versions 4.1 and prior versions released before January 20, 2017. An Improper Access Control vulnerability has been identified, which may allow an authenticated user to modify application files to escalate privileges. | |||||
| CVE-2017-5530 | 1 Tibco | 1 Tibbr | 2019-10-09 | 5.5 MEDIUM | 8.1 HIGH |
| The tibbr web server components of tibbr Community, and tibbr Enterprise contain SAML protocol handling errors which may allow authorized users to impersonate other users, and therefore escalate their access privileges. Affected releases are tibbr Community 5.2.1 and below; 6.0.0; 6.0.1; 7.0.0, tibbr Enterprise 5.2.1 and below; 6.0.0; 6.0.1; 7.0.0. | |||||
| CVE-2017-6625 | 1 Cisco | 1 Firepower Threat Defense | 2019-10-09 | 5.5 MEDIUM | 7.1 HIGH |
| A "Cisco Firepower Threat Defense 6.0.0 through 6.2.2 and Cisco ASA with FirePOWER Module Denial of Service" vulnerability in the access control policy of Cisco Firepower System Software could allow an authenticated, remote attacker to cause an affected system to stop inspecting and processing packets, resulting in a denial of service (DoS) condition. The vulnerability is due to improper SSL policy handling by the affected software when packets are passed through the sensing interfaces of an affected system. An attacker could exploit this vulnerability by sending crafted packets through a targeted system. This vulnerability affects Cisco Firepower System Software that is configured with the SSL policy feature. Cisco Bug IDs: CSCvc84361. | |||||
| CVE-2017-6631 | 1 Cisco | 6 Yesmax Hd, Yesmax Hd Firmware, Yesmaxtotal and 3 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812. | |||||
| CVE-2017-5531 | 1 Tibco | 2 Managed File Transfer Command Center, Managed File Transfer Internet Server | 2019-10-09 | 6.5 MEDIUM | 8.8 HIGH |
| Deployments of TIBCO Managed File Transfer Command Center versions 8.0.0 and 8.0.1 and TIBCO Managed File Transfer Internet Server versions 8.0.0 and 8.0.1 that enable the Administrator Service may be affected by a vulnerability which may allow any authenticated user to gain administrative control of Managed File Transfer web applications. | |||||
| CVE-2017-5534 | 1 Tibco | 1 Tibbr | 2019-10-09 | 9.0 HIGH | 8.8 HIGH |
| The tibbr user profiles components of tibbr Community, and tibbr Enterprise expose a weakness in an improperly sandboxed third-party component. Affected releases are TIBCO Software Inc. tibbr Community 5.2.1 and below; 6.0.0; 6.0.1; 7.0.0, tibbr Enterprise 5.2.1 and below; 6.0.0; 6.0.1; 7.0.0. | |||||
| CVE-2017-6052 | 1 Hyundaiusa | 1 Blue Link | 2019-10-09 | 4.3 MEDIUM | 3.7 LOW |
| A Man-in-the-Middle issue was discovered in Hyundai Motor America Blue Link 3.9.5 and 3.9.4. Communication channel endpoints are not verified, which may allow a remote attacker to access or influence communications between the identified endpoints. | |||||
| CVE-2017-2664 | 1 Redhat | 2 Cloudforms, Cloudforms Management Engine | 2019-10-09 | 4.0 MEDIUM | 6.5 MEDIUM |
| CloudForms Management Engine (cfme) before 5.7.3 and 5.8.x before 5.8.1 lacks RBAC controls on certain methods in the rails application portion of CloudForms. An attacker with access could use a variety of methods within the rails application portion of CloudForms to escalate privileges. | |||||
| CVE-2017-3960 | 1 Mcafee | 1 Network Security Manager | 2019-10-09 | 6.5 MEDIUM | 8.8 HIGH |
| Exploitation of Authorization vulnerability in the web interface in McAfee Network Security Management (NSM) before 8.2.7.42.2 allows authenticated users to gain elevated privileges via a crafted HTTP request parameter. | |||||
| CVE-2017-2650 | 1 Jenkins | 1 Pipeline Classpath Step | 2019-10-09 | 6.0 MEDIUM | 8.5 HIGH |
| It was found that the use of Pipeline: Classpath Step Jenkins plugin enables a bypass of the Script Security sandbox for users with SCM commit access, as well as users with e.g. Job/Configure permission in Jenkins. | |||||
| CVE-2017-2663 | 1 Redhat | 1 Subscription-manager | 2019-10-09 | 4.6 MEDIUM | 7.8 HIGH |
| It was found that subscription-manager's DBus interface before 1.19.4 let unprivileged user access the com.redhat.RHSM1.Facts.GetFacts and com.redhat.RHSM1.Config.Set methods. An unprivileged local attacker could use these methods to gain access to private information, or launch a privilege escalation attack. | |||||
| CVE-2017-2684 | 1 Siemens | 1 Simatic Logon | 2019-10-09 | 6.8 MEDIUM | 9.0 CRITICAL |
| Siemens SIMATIC Logon prior to V1.5 SP3 Update 2 could allow an attacker with knowledge of a valid user name, and physical or network access to the affected system, to bypass the application-level authentication. | |||||
| CVE-2017-2628 | 2 Haxx, Redhat | 4 Curl, Enterprise Linux Desktop, Enterprise Linux Server and 1 more | 2019-10-09 | 7.5 HIGH | 9.8 CRITICAL |
| curl, as shipped in Red Hat Enterprise Linux 6 before version 7.19.7-53, did not correctly backport the fix for CVE-2015-3148 because it did not reflect the fact that the HAVE_GSSAPI define was meanwhile substituted by USE_HTTP_NEGOTIATE. This issue was introduced in RHEL 6.7 and affects RHEL 6 curl only. | |||||
| CVE-2017-1350 | 1 Ibm | 1 Infosphere Information Server | 2019-10-09 | 7.2 HIGH | 7.8 HIGH |
| IBM InfoSphere Information Server 9.1, 11.3, 11.5, and 11.7 could allow a user to escalate their privileges to administrator due to improper access controls. IBM X-Force ID: 126526. | |||||
| CVE-2017-1788 | 1 Ibm | 1 Websphere Application Server | 2019-10-09 | 5.0 MEDIUM | 5.3 MEDIUM |
| IBM WebSphere Application Server 9 installations using Form Login could allow a remote attacker to conduct spoofing attacks. IBM X-Force ID: 137031. | |||||
| CVE-2017-2589 | 2 Hawt, Redhat | 2 Hawtio, Jboss Fuse | 2019-10-09 | 6.0 MEDIUM | 9.0 CRITICAL |
| It was discovered that the hawtio servlet 1.4 uses a single HttpClient instance to proxy requests with a persistent cookie store (cookies are stored locally and are not passed between the client and the end URL) which means all clients using that proxy are sharing the same cookies. | |||||