Filtered by vendor Linksys
Subscribe
Search
Total
84 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-35572 | 1 Linksys | 2 E5350, E5350 Firmware | 2023-08-08 | N/A | 7.5 HIGH |
| On Linksys E5350 WiFi Router with firmware version 1.0.00.037 and lower, (and potentially other vendors/devices due to code reuse), the /SysInfo.htm URI does not require a session ID. This web page calls a show_sysinfo function which retrieves WPA passwords, SSIDs, MAC Addresses, serial numbers, WPS Pins, and hardware/firmware versions, and prints this information into the web page. This web page is visible when remote management is enabled. A user who has access to the web interface of the device can extract these secrets. If the device has remote management enabled and is connected directly to the internet, this vulnerability is exploitable over the internet without interaction. | |||||
| CVE-2022-24372 | 1 Linksys | 2 Mr9600, Mr9600 Firmware | 2022-05-09 | 4.9 MEDIUM | 4.6 MEDIUM |
| Linksys MR9600 devices before 2.0.5 allow attackers to read arbitrary files via a symbolic link to the root directory of a NAS SMB share. | |||||
| CVE-2019-7311 | 1 Linksys | 2 Wrt1900acs, Wrt1900acs Firmware | 2021-07-21 | 7.2 HIGH | 7.8 HIGH |
| An issue was discovered on Linksys WRT1900ACS 1.0.3.187766 devices. A lack of encryption in how the user login cookie (admin-auth) is stored on a victim's computer results in the admin password being discoverable by a local attacker, and usable to gain administrative access to the victim's router. The admin password is stored in base64 cleartext in an "admin-auth" cookie. An attacker sniffing the network at the time of login could acquire the router's admin password. Alternatively, gaining physical access to the victim's computer soon after an administrative login could result in compromise. | |||||
| CVE-2020-35714 | 1 Linksys | 2 Re6500, Re6500 Firmware | 2021-07-21 | 6.5 MEDIUM | 8.8 HIGH |
| Belkin LINKSYS RE6500 devices before 1.0.11.001 allow remote authenticated users to execute arbitrary commands via goform/systemCommand?command= in conjunction with the goform/pingstart program. | |||||
| CVE-2019-16340 | 1 Linksys | 6 Velop Whw0301, Velop Whw0301 Firmware, Velop Whw0302 and 3 more | 2021-07-21 | 6.4 MEDIUM | 9.8 CRITICAL |
| Belkin Linksys Velop 1.1.8.192419 devices allows remote attackers to discover the recovery key via a direct request for the /sysinfo_json.cgi URI. | |||||
| CVE-2020-35715 | 1 Linksys | 2 Re6500, Re6500 Firmware | 2020-12-28 | 9.0 HIGH | 8.8 HIGH |
| Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote authenticated users to execute arbitrary commands via shell metacharacters in a filename to the upload_settings.cgi page. | |||||
| CVE-2020-35716 | 1 Linksys | 2 Re6500, Re6500 Firmware | 2020-12-28 | 7.8 HIGH | 7.5 HIGH |
| Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote attackers to cause a persistent denial of service (segmentation fault) via a long /goform/langSwitch langSelectionOnly parameter. | |||||
| CVE-2020-35713 | 1 Linksys | 2 Re6500, Re6500 Firmware | 2020-12-28 | 10.0 HIGH | 9.8 CRITICAL |
| Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote attackers to execute arbitrary commands or set a new password via shell metacharacters to the goform/setSysAdm page. | |||||
| CVE-2019-7579 | 1 Linksys | 2 Wrt1900acs, Wrt1900acs Firmware | 2020-08-24 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on Linksys WRT1900ACS 1.0.3.187766 devices. An ability exists for an unauthenticated user to browse a confidential ui/1.0.99.187766/dynamic/js/setup.js.localized file on the router's webserver, allowing for an attacker to identify possible passwords that the system uses to set the default guest network password. An attacker can use this list of 30 words along with a random 2 digit number to brute force their access onto a router's guest network. | |||||
| CVE-2019-11535 | 1 Linksys | 4 Re6300, Re6300 Firmware, Re6400 and 1 more | 2020-08-24 | 10.0 HIGH | 9.8 CRITICAL |
| Unsanitized user input in the web interface for Linksys WiFi extender products (RE6400 and RE6300 through 1.2.04.022) allows for remote command execution. An attacker can access system OS configurations and commands that are not intended for use beyond the web UI. | |||||
| CVE-2009-5140 | 1 Linksys | 2 Spa2102, Spa2102 Firmware | 2020-02-14 | 4.3 MEDIUM | 8.8 HIGH |
| The SIP implementation on the Linksys SPA2102 phone adapter provides hashed credentials in a response to an invalid authentication challenge, which makes it easier for remote attackers to obtain access via a brute-force attack, related to a "SIP Digest Leak" issue. | |||||
| CVE-2013-3067 | 1 Linksys | 2 Wrt310n, Wrt310n Firmware | 2020-02-10 | 3.5 LOW | 5.4 MEDIUM |
| Linksys WRT310Nv2 2.0.0.1 is vulnerable to XSS. | |||||
| CVE-2013-4658 | 1 Linksys | 2 Ea6500, Ea6500 Firmware | 2019-10-29 | 10.0 HIGH | 9.8 CRITICAL |
| Linksys EA6500 has SMB Symlink Traversal allowing symbolic links to be created to locations outside of the Samba share. | |||||
| CVE-2018-17208 | 1 Linksys | 2 Velop, Velop Firmware | 2019-10-03 | 9.3 HIGH | 8.8 HIGH |
| Linksys Velop 1.1.2.187020 devices allow unauthenticated command injection, providing an attacker with full root access, via cgi-bin/zbtest.cgi or cgi-bin/zbtest2.cgi (scripts that can be discovered with binwalk on the firmware, but are not visible in the web interface). This occurs because shell metacharacters in the query string are mishandled by ShellExecute, as demonstrated by the zbtest.cgi?cmd=level&level= substring. This can also be exploited via CSRF. | |||||
| CVE-2009-5157 | 1 Linksys | 2 Wag54g2, Wag54g2 Firmware | 2019-06-17 | 9.0 HIGH | 8.8 HIGH |
| On Linksys WAG54G2 1.00.10 devices, there is authenticated command injection via shell metacharacters in the setup.cgi c4_ping_ipaddr variable. | |||||
| CVE-2018-3955 | 1 Linksys | 4 E1200, E1200 Firmware, E2500 and 1 more | 2019-01-23 | 9.0 HIGH | 7.2 HIGH |
| An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object. | |||||
| CVE-2018-3953 | 1 Linksys | 4 E1200, E1200 Firmware, E2500 and 1 more | 2019-01-23 | 9.0 HIGH | 7.2 HIGH |
| Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAM. Data entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal, it enters a code path that continues until it reaches offset 0x0042B5C4 in the 'start_lltd' function. Within the 'start_lltd' function, a 'nvram_get' call is used to obtain the value of the user-controlled 'machine_name' NVRAM entry. This value is then entered directly into a command intended to write the host name to a file and subsequently executed. | |||||
| CVE-2018-3954 | 1 Linksys | 4 E1200, E1200 Firmware, E2500 and 1 more | 2019-01-23 | 9.0 HIGH | 7.2 HIGH |
| Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAMData entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object. | |||||
| CVE-2006-0309 | 1 Linksys | 1 Befvp41 | 2018-10-19 | 4.0 MEDIUM | N/A |
| Linksys BEFVP41 VPN Router 2.0 with firmware 1.01.04 allows remote attackers on the local network, to cause a denial of service via IP packets with a null IP option length. | |||||
| CVE-2006-1067 | 1 Linksys | 1 Wrt54g V5 | 2018-10-18 | 5.0 MEDIUM | N/A |
| Linksys WRT54G routers version 5 (running VXWorks) allow remote attackers to cause a denial of service by sending a malformed DCC SEND string to an IRC channel, which causes an IRC connection reset, possibly related to the masquerading code for NAT environments, and as demonstrated via (1) a DCC SEND with a single long argument, or (2) a DCC SEND with IP, port, and filesize arguments with a 0 value. | |||||
| CVE-2006-6411 | 1 Linksys | 1 Wip 330 Wireless-g Ip Phone | 2018-10-17 | 7.8 HIGH | N/A |
| PhoneCtrl.exe in Linksys WIP 330 Wireless-G IP Phone 1.00.06A allows remote attackers to cause a denial of service (crash) via a TCP SYN scan, as demonstrated using TCP ports 1-65535 with nmap. | |||||
| CVE-2007-1585 | 1 Linksys | 2 Wag200g, Wrt54gc | 2018-10-16 | 5.0 MEDIUM | N/A |
| The Linksys WAG200G with firmware 1.01.01, WRT54GC 2 with firmware 1.00.7, and WRT54GC 1 with firmware 1.03.0 and earlier allow remote attackers to obtain sensitive information (passwords and configuration data) via a packet to UDP port 916. NOTE: some of these details are obtained from third party information. | |||||
| CVE-2008-0228 | 1 Linksys | 1 Wrt54gl | 2018-10-15 | 9.3 HIGH | N/A |
| Cross-site request forgery (CSRF) vulnerability in apply.cgi in the Linksys WRT54GL Wireless-G Broadband Router with firmware 4.30.9 allows remote attackers to perform actions as administrators. | |||||
| CVE-2007-6709 | 1 Linksys | 1 Wag54gs | 2018-10-15 | 7.5 HIGH | N/A |
| The Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.01.03 and earlier firmware has "admin" as its default password for the "admin" account, which makes it easier for remote attackers to obtain access. | |||||
| CVE-2007-6708 | 1 Linksys | 1 Wag54gs | 2018-10-15 | 4.3 MEDIUM | N/A |
| Multiple cross-site request forgery (CSRF) vulnerabilities on the Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.01.03 and earlier firmware allow remote attackers to perform actions as administrators via an arbitrary valid request to an administrative URI, as demonstrated by (1) a Restore Factory Defaults action using the mtenRestore parameter to setup.cgi and (2) creation of a user account using the sysname parameter to setup.cgi. | |||||
| CVE-2007-6707 | 1 Linksys | 1 Wag54gs | 2018-10-15 | 4.3 MEDIUM | N/A |
| Multiple cross-site scripting (XSS) vulnerabilities on the Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.01.03 and earlier firmware allow remote attackers to inject arbitrary web script or HTML via unspecified vectors, a different issue than CVE-2007-3574. | |||||
| CVE-2007-5474 | 2 Atheros, Linksys | 2 Ar5416-ac1e Chipset, Wrt350n | 2018-10-15 | 6.3 MEDIUM | N/A |
| The driver for the Linksys WRT350N Wi-Fi access point with firmware 2.00.17 on the Atheros AR5416-AC1E chipset does not properly parse the Atheros vendor-specific information element in an association request, which allows remote authenticated users to cause a denial of service (device reboot or hang) or possibly execute arbitrary code via an Atheros information element with an invalid length, as demonstrated by an element that is too long. | |||||
| CVE-2007-5475 | 2 Linksys, Marvell | 2 Wap4400n, 88w8361p-bem Chipset | 2018-10-15 | 6.8 MEDIUM | N/A |
| Multiple buffer overflows in the Marvell wireless driver, as used in Linksys WAP4400N Wi-Fi access point with firmware 1.2.17 on the Marvell 88W8361P-BEM1 chipset, and other products, allow remote 802.11-authenticated users to cause a denial of service (wireless access point crash) and possibly execute arbitrary code via an association request with long (1) rates, (2) extended rates, and unspecified other information elements. | |||||
| CVE-2007-3574 | 1 Linksys | 1 Wag54gs | 2018-10-15 | 4.3 MEDIUM | N/A |
| Multiple cross-site scripting (XSS) vulnerabilities in setup.cgi on the Cisco Linksys WAG54GS Wireless-G ADSL Gateway with 1.00.06 firmware allow remote attackers to inject arbitrary web script or HTML via the (1) c4_trap_ip_, (2) devname, (3) snmp_getcomm, or (4) snmp_setcomm parameter. | |||||
| CVE-2008-4441 | 2 Linksys, Marvell | 2 Wap400n, 88w8361p-bem1 | 2018-10-11 | 7.1 HIGH | N/A |
| The Marvell driver for the Linksys WAP4400N Wi-Fi access point with firmware 1.2.14 on the Marvell 88W8361P-BEM1 chipset, when WEP mode is enabled, does not properly parse malformed 802.11 frames, which allows remote attackers to cause a denial of service (reboot or hang-up) via a malformed association request containing the WEP flag, as demonstrated by a request that is too short, a different vulnerability than CVE-2008-1144 and CVE-2008-1197. | |||||
| CVE-2008-1268 | 1 Linksys | 1 Wrt54g | 2018-10-11 | 10.0 HIGH | N/A |
| The FTP server on the Linksys WRT54G 7 router with 7.00.1 firmware does not verify authentication credentials, which allows remote attackers to establish an FTP session by sending an arbitrary username and password. | |||||
| CVE-2008-1243 | 1 Linksys | 1 Wrt300n | 2018-10-11 | 4.3 MEDIUM | N/A |
| Cross-site scripting (XSS) vulnerability on the Linksys WRT300N router with firmware 2.00.20, when Mozilla Firefox or Apple Safari is used, allows remote attackers to inject arbitrary web script or HTML via the dyndns_domain parameter to the default URI. | |||||
| CVE-2008-1265 | 1 Linksys | 1 Wrt54g | 2018-10-11 | 7.8 HIGH | N/A |
| The Linksys WRT54G router allows remote attackers to cause a denial of service (device restart) via a long username and password to the FTP interface. | |||||
| CVE-2008-1247 | 1 Linksys | 1 Wrt54g | 2018-10-11 | 10.0 HIGH | N/A |
| The web interface on the Linksys WRT54g router with firmware 1.00.9 does not require credentials when invoking scripts, which allows remote attackers to perform arbitrary administrative actions via a direct request to (1) Advanced.tri, (2) AdvRoute.tri, (3) Basic.tri, (4) ctlog.tri, (5) ddns.tri, (6) dmz.tri, (7) factdefa.tri, (8) filter.tri, (9) fw.tri, (10) manage.tri, (11) ping.tri, (12) PortRange.tri, (13) ptrigger.tri, (14) qos.tri, (15) rstatus.tri, (16) tracert.tri, (17) vpn.tri, (18) WanMac.tri, (19) WBasic.tri, or (20) WFilter.tri. NOTE: the Security.tri vector is already covered by CVE-2006-5202. | |||||
| CVE-2008-1264 | 1 Linksys | 1 Wrt54g | 2018-10-11 | 7.5 HIGH | N/A |
| The Linksys WRT54G router has "admin" as its default FTP password, which allows remote attackers to access sensitive files including nvram.cfg, a file that lists all HTML documents, and an ELF executable file. | |||||
| CVE-2008-1263 | 1 Linksys | 1 Wrt54g | 2018-10-11 | 4.0 MEDIUM | N/A |
| The Linksys WRT54G router stores passwords and keys in cleartext in the Config.bin file, which might allow remote authenticated users to obtain sensitive information via an HTTP request for the top-level Config.bin URI. | |||||
| CVE-2010-2261 | 1 Linksys | 1 Wap54gv3 | 2018-10-10 | 10.0 HIGH | N/A |
| Linksys WAP54Gv3 firmware 3.04.03 and earlier allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) data2 and (2) data3 parameters to (a) Debug_command_page.asp and (b) debug.cgi. | |||||
| CVE-2010-1573 | 1 Linksys | 1 Wap54gv3 | 2018-10-10 | 10.0 HIGH | N/A |
| Linksys WAP54Gv3 firmware 3.04.03 and earlier uses a hard-coded username (Gemtek) and password (gemtekswd) for a debug interface for certain web pages, which allows remote attackers to execute arbitrary commands via the (1) data1, (2) data2, or (3) data3 parameters to (a) Debug_command_page.asp and (b) debug.cgi. | |||||
| CVE-2017-17411 | 1 Linksys | 2 Wvbr0, Wvbr0 Firmware | 2018-08-28 | 10.0 HIGH | 9.8 CRITICAL |
| This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Linksys WVBR0. Authentication is not required to exploit this vulnerability. The specific flaw exists within the web management portal. The issue lies in the lack of proper validation of user data before executing a system call. An attacker could leverage this vulnerability to execute code with root privileges. Was ZDI-CAN-4892. | |||||
| CVE-2004-0580 | 1 Linksys | 12 Befcmu10, Befn2ps4, Befsr11 and 9 more | 2018-08-13 | 5.0 MEDIUM | N/A |
| DHCP on Linksys BEFSR11, BEFSR41, BEFSR81, and BEFSRU31 Cable/DSL Routers, firmware version 1.45.7, does not properly clear previously used buffer contents in a BOOTP reply packet, which allows remote attackers to obtain sensitive information. | |||||
| CVE-2007-2270 | 1 Linksys | 1 Spa941 | 2017-10-11 | 7.8 HIGH | N/A |
| The Linksys SPA941 VoIP Phone allows remote attackers to cause a denial of service (device reboot) via a 0377 (0xff) character in the From header, and possibly certain other locations, in a SIP INVITE request. | |||||
| CVE-2006-5202 | 1 Linksys | 1 Wrt54g | 2017-10-11 | 5.0 MEDIUM | N/A |
| Linksys WRT54g firmware 1.00.9 does not require credentials when making configuration changes, which allows remote attackers to modify arbitrary configurations via a direct request to Security.tri, as demonstrated using the SecurityMode and layout parameters, a different issue than CVE-2006-2559. | |||||
| CVE-2001-1117 | 1 Linksys | 1 Befsr41 | 2017-10-10 | 5.0 MEDIUM | N/A |
| LinkSys EtherFast BEFSR41 Cable/DSL routers running firmware before 1.39.3 Beta allows a remote attacker to view administration and user passwords by connecting to the router and viewing the HTML source for (1) index.htm and (2) Password.htm. | |||||
| CVE-2001-0514 | 3 Atmel, Linksys, Netgear | 3 802.11b Vnet-b Access Point, Wap11, Me102 | 2017-10-10 | 7.5 HIGH | N/A |
| SNMP service in Atmel 802.11b VNET-B Access Point 1.3 and earlier, as used in Netgear ME102 and Linksys WAP11, accepts arbitrary community strings with requested MIB modifications, which allows remote attackers to obtain sensitive information such as WEP keys, cause a denial of service, or gain access to the network. | |||||
| CVE-2001-0888 | 3 Atmel, Linksys, Netgear | 3 Firmware, Wap11, Me102 | 2017-10-10 | 5.0 MEDIUM | N/A |
| Atmel Firmware 1.3 Wireless Access Point (WAP) allows remote attackers to cause a denial of service via a SNMP request with (1) a community string other than "public" or (2) an unknown OID, which causes the WAP to deny subsequent SNMP requests. | |||||
| CVE-2017-10677 | 1 Linksys | 2 Ea4500, Ea4500 Firmware | 2017-08-14 | 6.8 MEDIUM | 8.8 HIGH |
| Cross-Site Request Forgery (CSRF) exists on Linksys EA4500 devices with Firmware Version before 2.1.41.164606, as demonstrated by a request to apply.cgi to disable SIP. | |||||
| CVE-2008-4594 | 2 Linksys, Marvell | 2 Wap400n, 88w8361p-bem1 | 2017-08-08 | 10.0 HIGH | N/A |
| Unspecified vulnerability in the SNMPv3 component in Linksys WAP4400N firmware 1.2.14 on the Marvell Semiconductor 88W8361P-BEM1 chipset has unknown impact and attack vectors, probably remote. | |||||
| CVE-2008-2092 | 1 Linksys | 1 Spa-2102 Phone Adapter | 2017-08-08 | 7.8 HIGH | N/A |
| Linksys SPA-2102 Phone Adapter 3.3.6 allows remote attackers to cause a denial of service (crash) via a long ping packet ("ping of death"). NOTE: the severity of this issue has been disputed since there are limited attack scenarios. | |||||
| CVE-2007-5411 | 1 Linksys | 1 Spa941 | 2017-07-29 | 4.3 MEDIUM | N/A |
| Cross-site scripting (XSS) vulnerability in the Linksys SPA941 VoIP Phone with firmware 5.1.8 allows remote attackers to inject arbitrary web script or HTML via the From header in a SIP message. | |||||
| CVE-2006-7121 | 1 Linksys | 1 Spa921 | 2017-07-29 | 7.8 HIGH | N/A |
| The HTTP server in Linksys SPA-921 VoIP Desktop Phone allows remote attackers to cause a denial of service (reboot) via (1) a long URL, or a long (2) username or (3) password during Basic Authentication. | |||||