Search
Total
634 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2019-15064 | 1 Hinet | 2 Gpon, Gpon Firmware | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| HiNet GPON firmware version < I040GWR190731 allows an attacker login to device without any authentication. | |||||
| CVE-2019-15018 | 1 Zingbox | 1 Inspector | 2020-08-24 | 5.0 MEDIUM | 7.5 HIGH |
| A security vulnerability exists in the Zingbox Inspector versions 1.280 and earlier, where authentication is not required when binding the Inspector instance to a different customer tenant. | |||||
| CVE-2019-14984 | 1 Eq-3 | 4 Homematic Ccu2, Homematic Ccu2 Firmware, Homematic Ccu3 and 1 more | 2020-08-24 | 6.8 MEDIUM | 8.1 HIGH |
| eQ-3 Homematic CCU2 and CCU3 with the XML-API through 1.2.0 AddOn installed allow Remote Code Execution by unauthenticated attackers with access to the web interface, because the undocumented addons/xmlapi/exec.cgi script uses CMD_EXEC to execute TCL code from a POST request. | |||||
| CVE-2019-11466 | 1 Couchbase | 1 Couchbase Server | 2020-08-24 | 5.0 MEDIUM | 5.3 MEDIUM |
| In Couchbase Server 6.0.0 and 5.5.0, the eventing service exposes system diagnostic profile via an HTTP endpoint that does not require credentials on a port earmarked for internal traffic only. This has been remedied in version 6.0.1 and now requires valid credentials to access. | |||||
| CVE-2019-14253 | 1 Publisure | 1 Publisure | 2020-08-24 | 6.4 MEDIUM | 6.5 MEDIUM |
| An issue was discovered in servletcontroller in the secure portal in Publisure 2.1.2. One can bypass authentication and perform a query on PHP forms within the /AdminDir folder that should be restricted. | |||||
| CVE-2019-11496 | 1 Couchbase | 1 Couchbase Server | 2020-08-24 | 6.4 MEDIUM | 9.1 CRITICAL |
| In versions of Couchbase Server prior to 5.0, the bucket named "default" was a special bucket that allowed read and write access without authentication. As part of 5.0, the behavior of all buckets including "default" were changed to only allow access by authenticated users with sufficient authorization. However, users were allowed unauthenticated and unauthorized access to the "default" bucket if the properties of this bucket were edited. This has been fixed in versions 5.1.0 and 5.5.0. | |||||
| CVE-2019-11523 | 1 Anviz | 2 M3, M3 Firmware | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| Anviz Global M3 Outdoor RFID Access Control executes any command received from any source. No authentication/encryption is done. Attackers can fully interact with the device: for example, send the "open door" command, download the users list (which includes RFID codes and passcodes in cleartext), or update/create users. The same attack can be executed on a local network and over the internet (if the device is exposed on a public IP address). | |||||
| CVE-2019-13406 | 1 Androvideo | 2 Vd 1, Vd 1 Firmware | 2020-08-24 | 5.0 MEDIUM | 7.5 HIGH |
| A broken access control vulnerability found in Advan VD-1 firmware versions up to 230. An attacker can send a POST request to cgibin/ApkUpload.cgi to install arbitrary APK without any authentication. | |||||
| CVE-2019-13405 | 1 Androvideo | 2 Vd 1, Vd 1 Firmware | 2020-08-24 | 10.0 HIGH | 9.8 CRITICAL |
| A broken access control vulnerability found in Advan VD-1 firmware version 230 leads to insecure ADB service. An attacker can send a POST request to cgibin/AdbSetting.cgi to enable ADB without any authentication then take the compromised device as a relay or to install mining software. | |||||
| CVE-2019-13344 | 1 Crudlab | 1 Wp Like Button | 2020-08-24 | 5.0 MEDIUM | 5.3 MEDIUM |
| An authentication bypass vulnerability in the CRUDLab WP Like Button plugin through 1.6.0 for WordPress allows unauthenticated attackers to change settings. The contains() function in wp_like_button.php did not check if the current request is made by an authorized user, thus allowing any unauthenticated user to successfully update settings, as demonstrated by the wp-admin/admin.php?page=facebook-like-button each_page_url or code_snippet parameter. | |||||
| CVE-2019-13131 | 1 Supermicro | 1 Superdoctor 5 | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| Super Micro SuperDoctor 5, when restrictions are not implemented in agent.cfg, allows remote attackers to execute arbitrary commands via NRPE. | |||||
| CVE-2019-12890 | 1 Redwoodhq | 1 Redwoodhq | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| RedwoodHQ 2.5.5 does not require any authentication for database operations, which allows remote attackers to create admin users via a con.automationframework users insert_one call. | |||||
| CVE-2019-12505 | 1 Inateck | 2 Wp1001, Wp1001 Firmware | 2020-08-24 | 8.3 HIGH | 8.8 HIGH |
| Due to unencrypted and unauthenticated data communication, the wireless presenter Inateck WP1001 v1.3C is prone to keystroke injection attacks. Thus, an attacker is able to send arbitrary keystrokes to a victim's computer system, e.g., to install malware when the target system is unattended. In this way, an attacker can remotely take control over the victim's computer that is operated with an affected receiver of this device. | |||||
| CVE-2019-12503 | 1 Inateck | 2 Bcst-60, Bcst-60 Firmware | 2020-08-24 | 10.0 HIGH | 9.8 CRITICAL |
| Due to unencrypted and unauthenticated data communication, the wireless barcode scanner Inateck BCST-60 is prone to keystroke injection attacks. Thus, an attacker is able to send arbitrary keystrokes to a victim's computer system, e.g., to install malware when the target system is unattended. In this way, an attacker can remotely take control over the victim's computer that is operated with an affected receiver of this device. | |||||
| CVE-2019-12500 | 1 Mi | 2 M365, M365 Firmware | 2020-08-24 | 3.3 LOW | 6.5 MEDIUM |
| The Xiaomi M365 scooter 2019-02-12 before 1.5.1 allows spoofing of "suddenly accelerate" commands. This occurs because Bluetooth Low Energy commands have no server-side authentication check. Other affected commands include suddenly braking, locking, and unlocking. | |||||
| CVE-2019-12506 | 1 Logitech | 2 R700 Laser Presentation Remote, R700 Laser Presentation Remote Firmware | 2020-08-24 | 8.3 HIGH | 8.8 HIGH |
| Due to unencrypted and unauthenticated data communication, the wireless presenter Logitech R700 Laser Presentation Remote R-R0010 is prone to keystroke injection attacks. Thus, an attacker is able to send arbitrary keystrokes to a victim's computer system, e.g., to install malware when the target system is unattended. In this way, an attacker can remotely take control over the victim's computer that is operated with an affected receiver of this device. | |||||
| CVE-2019-12468 | 2 Debian, Mediawiki | 2 Debian Linux, Mediawiki | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| An Incorrect Access Control vulnerability was found in Wikimedia MediaWiki 1.27.0 through 1.32.1. Directly POSTing to Special:ChangeEmail would allow for bypassing re-authentication, allowing for potential account takeover. | |||||
| CVE-2019-12392 | 1 Anviz | 1 Anviz Firmware | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| Anviz access control devices allow remote attackers to issue commands without a password. | |||||
| CVE-2019-12390 | 1 Anviz | 1 Anviz Firmware | 2020-08-24 | 5.0 MEDIUM | 5.3 MEDIUM |
| Anviz access control devices expose private Information (pin code and name) by allowing remote attackers to query this information without credentials via port tcp/5010. | |||||
| CVE-2019-12389 | 1 Anviz | 1 Anviz Firmware | 2020-08-24 | 5.0 MEDIUM | 7.5 HIGH |
| Anviz access control devices expose credentials (names and passwords) by allowing remote attackers to query this information without credentials via port tcp/5010. | |||||
| CVE-2019-12289 | 1 Vstracam | 4 C38s, C38s Firmware, C7824wip and 1 more | 2020-08-24 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered in upgrade_firmware.cgi on VStarcam 100T (C7824WIP) CH-sys-48.53.75.119~123 and 200V (C38S) CH-sys-48.53.203.119~123 devices. A remote command can be executed through a system firmware update without authentication. The attacker can modify the files within the internal firmware or even steal account information by executing a command. | |||||
| CVE-2019-12174 | 1 Hide | 1 Hide.me | 2020-08-24 | 7.2 HIGH | 7.8 HIGH |
| hide.me before 2.4.4 on macOS suffers from a privilege escalation vulnerability in the connectWithExecutablePath:configFilePath:configFileName method of the me_hide_vpnhelper.Helper class in the me.hide.vpnhelper macOS privilege helper tool. This method takes user-supplied input and can be used to escalate privileges, as well as obtain the ability to run any application on the system in the root context. | |||||
| CVE-2019-12130 | 1 Onap | 1 Open Network Automation Platform | 2020-08-24 | 10.0 HIGH | 9.8 CRITICAL |
| In ONAP CLI through Dublin, by accessing an applicable port (30234, 30290, 32010, 30270, 30224, 30281, 30254, 30285, and/or 30271), an attacker gains full access to the respective ONAP services without any authentication. All ONAP Operations Manager (OOM) setups are affected. | |||||
| CVE-2019-12129 | 1 Onap | 1 Open Network Automation Platform | 2020-08-24 | 10.0 HIGH | 9.8 CRITICAL |
| In ONAP MSB through Dublin, by accessing an applicable port (30234, 30290, 32010, 30270, 30224, 30281, 30254, 30285, and/or 30271), an attacker gains full access to the respective ONAP services without any authentication. All ONAP Operations Manager (OOM) setups are affected. | |||||
| CVE-2019-9974 | 1 Dasannetworks | 2 H660rm, H660rm Firmware | 2020-08-24 | 6.4 MEDIUM | 9.1 CRITICAL |
| diag_tool.cgi on DASAN H660RM GPON routers with firmware 1.03-0022 lacks any authorization check, which allows remote attackers to run a ping command via a GET request to enumerate LAN devices or crash the router with a DoS attack. | |||||
| CVE-2019-9935 | 1 Lexmark | 50 Cs31x, Cs31x Firmware, Cs41x and 47 more | 2020-08-24 | 5.0 MEDIUM | 5.3 MEDIUM |
| Various Lexmark products have Incorrect Access Control (issue 2 of 2). | |||||
| CVE-2019-9934 | 1 Lexmark | 50 Cs31x, Cs31x Firmware, Cs41x and 47 more | 2020-08-24 | 5.0 MEDIUM | 5.3 MEDIUM |
| Various Lexmark products have Incorrect Access Control (issue 1 of 2). | |||||
| CVE-2018-19079 | 2 Foscam, Opticam | 6 C2, C2 Application Firmware, C2 System Firmware and 3 more | 2020-08-24 | 7.8 HIGH | 7.5 HIGH |
| An issue was discovered on Foscam Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The ONVIF devicemgmt SystemReboot method allows unauthenticated reboot. | |||||
| CVE-2018-19248 | 1 Epson | 2 Epson Workforce Wf-2861, Epson Workforce Wf-2861 Firmware | 2020-08-24 | 6.4 MEDIUM | 9.1 CRITICAL |
| The web service on Epson WorkForce WF-2861 10.48 LQ22I3(Recovery-mode), WF-2861 10.51.LQ20I6, and WF-2861 10.52.LQ17IA devices allows remote attackers to upload a firmware file and reset the printer without authentication by making a request to the /DOWN/FIRMWAREUPDATE/ROM1 URI and a POST request to the /FIRMWAREUPDATE URI. | |||||
| CVE-2018-20220 | 1 Teracue | 6 Enc-400 Hdmi, Enc-400 Hdmi2, Enc-400 Hdmi2 Firmware and 3 more | 2020-08-24 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on Teracue ENC-400 devices with firmware 2.56 and below. While the web interface requires authentication before it can be interacted with, a large portion of the HTTP endpoints are missing authentication. An attacker is able to view these pages before being authenticated, and some of these pages may disclose sensitive information. | |||||
| CVE-2019-9871 | 1 Jector | 2 Fm-k75, Fm-k75 Firmware | 2020-08-24 | 10.0 HIGH | 9.8 CRITICAL |
| Jector Smart TV FM-K75 devices allow remote code execution because there is an adb open port with root permission. | |||||
| CVE-2019-9727 | 1 Eq-3 | 2 Ccu3, Ccu3 Firmware | 2020-08-24 | 5.0 MEDIUM | 7.5 HIGH |
| Unauthenticated password hash disclosure in the User.getUserPWD method in eQ-3 AG Homematic CCU3 3.43.15 and earlier allows remote attackers to retrieve the GUI password hashes of GUI users. This vulnerability can be exploited by unauthenticated attackers with access to the web interface. | |||||
| CVE-2019-9585 | 1 Eq-3 | 4 Homematic Ccu2, Homematic Ccu2 Firmware, Homematic Ccu3 and 1 more | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| eQ-3 Homematic CCU2 prior to 2.47.10 and CCU3 prior to 3.47.10 JSON API has Improper Access Control for Interface.***Metadata related operations, resulting in the ability to read, set and deletion of Metadata. | |||||
| CVE-2019-9484 | 1 Carel | 2 Pcoweb Card, Pcoweb Card Firmware | 2020-08-24 | 5.0 MEDIUM | 7.5 HIGH |
| The Glen Dimplex Deutschland GmbH implementation of the Carel pCOWeb configuration tool allows remote attackers to obtain access via an HTTP session on port 10000, as demonstrated by reading the modem password (which is 1234), or reconfiguring "party mode" or "vacation mode." | |||||
| CVE-2019-9125 | 1 D-link | 2 Dir-878, Dir-878 Firmware | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-878 1.12B01 devices. Because strncpy is misused, there is a stack-based buffer overflow vulnerability that does not require authentication via the HNAP_AUTH HTTP header. | |||||
| CVE-2019-8993 | 1 Tibco | 5 Activematrix Bpm, Activematrix Policy Director, Activematrix Service Bus and 2 more | 2020-08-24 | 5.0 MEDIUM | 9.8 CRITICAL |
| The administrative web server component of TIBCO Software Inc.'s TIBCO ActiveMatrix BPM, TIBCO ActiveMatrix BPM Distribution for TIBCO Silver Fabric, TIBCO ActiveMatrix Policy Director, TIBCO ActiveMatrix Service Bus, TIBCO ActiveMatrix Service Grid, TIBCO ActiveMatrix Service Grid Distribution for TIBCO Silver Fabric, TIBCO Silver Fabric Enabler for ActiveMatrix BPM, and TIBCO Silver Fabric Enabler for ActiveMatrix Service Grid contains a vulnerability that could theoretically allow an unauthenticated user to download a file with credentials information. Affected releases are TIBCO Software Inc.'s TIBCO ActiveMatrix BPM: versions up to and including 4.2.0, TIBCO ActiveMatrix BPM Distribution for TIBCO Silver Fabric: versions up to and including 4.2.0, TIBCO ActiveMatrix Policy Director: versions up to and including 1.1.0, TIBCO ActiveMatrix Service Bus: versions up to and including 3.3.0, TIBCO ActiveMatrix Service Grid: versions up to and including 3.3.1, TIBCO ActiveMatrix Service Grid Distribution for TIBCO Silver Fabric: versions up to and including 3.3.0, TIBCO Silver Fabric Enabler for ActiveMatrix BPM: versions up to and including 1.4.1, and TIBCO Silver Fabric Enabler for ActiveMatrix Service Grid: versions up to and including 1.3.1. | |||||
| CVE-2019-8985 | 1 Netis-systems | 4 Wf2411, Wf2411 Firmware, Wf2880 and 1 more | 2020-08-24 | 9.0 HIGH | 9.8 CRITICAL |
| On Netis WF2411 with firmware 2.1.36123 and other Netis WF2xxx devices (possibly WF2411 through WF2880), there is a stack-based buffer overflow that does not require authentication. This can cause denial of service (device restart) or remote code execution. This vulnerability can be triggered by a GET request with a long HTTP "Authorization: Basic" header that is mishandled by user_auth->user_ok in /bin/boa. | |||||
| CVE-2018-6223 | 1 Trendmicro | 1 Email Encryption Gateway | 2020-08-24 | 5.0 MEDIUM | 9.8 CRITICAL |
| A missing authentication for appliance registration vulnerability in Trend Micro Email Encryption Gateway 5.5 could allow an attacker to manipulate the registration process of the product to reset configuration parameters. | |||||
| CVE-2019-7727 | 1 Nice | 1 Engage | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| In NICE Engage through 6.5, the default configuration binds an unauthenticated JMX/RMI interface to all network interfaces, without restricting registration of MBeans, which allows remote attackers to execute arbitrary code via the RMI protocol by using the JMX connector. The observed affected TCP port is 6338 but, based on the product's configuration, a different one could be vulnerable. | |||||
| CVE-2019-7564 | 1 Coship | 8 Rt3050, Rt3050 Firmware, Rt3052 and 5 more | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on Shenzhen Coship WM3300 WiFi Router 5.0.0.55 devices. The password reset functionality of the Wireless SSID doesn't require any type of authentication. By making a POST request to the regx/wireless/wl_security_2G.asp URI, the attacker can change the password of the Wi-FI network. | |||||
| CVE-2019-7390 | 1 Dlink | 2 Dir-823g, Dir-823g Firmware | 2020-08-24 | 5.0 MEDIUM | 8.6 HIGH |
| An issue was discovered in /bin/goahead on D-Link DIR-823G devices with firmware 1.02B03. There is incorrect access control allowing remote attackers to hijack the DNS service configuration of all clients in the WLAN, without authentication, via the SetWanSettings HNAP API. | |||||
| CVE-2019-7389 | 1 Dlink | 2 Dir-823g, Dir-823g Firmware | 2020-08-24 | 7.8 HIGH | 7.5 HIGH |
| An issue was discovered in /bin/goahead on D-Link DIR-823G devices with the firmware 1.02B03. There is incorrect access control allowing remote attackers to reset the router without authentication via the SetFactoryDefault HNAP API. Consequently, an attacker can achieve a denial-of-service attack without authentication. | |||||
| CVE-2019-6958 | 1 Bosch | 16 Access Easy Controller, Access Easy Controller Firmware, Access Professional Edition and 13 more | 2020-08-24 | 6.4 MEDIUM | 9.1 CRITICAL |
| A recently discovered security vulnerability affects all Bosch Video Management System (BVMS) versions 9.0 and below, DIVAR IP 2000, 3000, 5000 and 7000, Configuration Manager, Building Integration System (BIS) with Video Engine, Access Professional Edition (APE), Access Easy Controller (AEC), Bosch Video Client (BVC) and Video SDK (VSDK). The RCP+ network port allows access without authentication. Adding authentication feature to the respective library fixes the issue. The issue is classified as "CWE-284: Improper Access Control." This vulnerability, for example, allows a potential attacker to delete video or read video data. | |||||
| CVE-2019-6652 | 1 F5 | 1 Big-iq Centralized Management | 2020-08-24 | 6.4 MEDIUM | 6.5 MEDIUM |
| In BIG-IQ 6.0.0-6.1.0, services for stats do not require authentication nor do they implement any form of Transport Layer Security (TLS). | |||||
| CVE-2019-0246 | 1 Sap | 1 Cloud Connector | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| SAP Cloud Connector, before version 2.11.3, does not perform any authentication checks for functionalities that require user identity. | |||||
| CVE-2019-0261 | 1 Sap | 1 Landscape Management | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| Under certain circumstances, SAP HANA Extended Application Services, advanced model (XS advanced) does not perform authentication checks properly for XS advanced platform and business users. Fixed in 1.0.97 to 1.0.99 (running on SAP HANA 1 or SAP HANA 2 SPS0 (second S stands for stack)). | |||||
| CVE-2019-0312 | 1 Sap | 1 Netweaver Process Integration | 2020-08-24 | 5.0 MEDIUM | 5.3 MEDIUM |
| Several web pages provided SAP NetWeaver Process Integration (versions: SAP_XIESR: 7.10 to 7.11, 7.20, 7.30, 7.31, 7.40, 7.50 and SAP_XITOOL: 7.10 to 7.11, 7.30, 7.31, 7.40, 7.50) are not password protected. An attacker could access landscape information like host names, ports or other technical data in the absence of restrictive firewall and port settings. | |||||
| CVE-2019-6451 | 1 Soyal | 4 Ar-727h, Ar-727h Firmware, Ar-829ev5 and 1 more | 2020-08-24 | 5.0 MEDIUM | 7.5 HIGH |
| On SOYAL AR-727H and AR-829Ev5 devices, all CGI programs allow unauthenticated POST access. | |||||
| CVE-2019-10039 | 1 Dlink | 2 Dir-816, Dir-816 Firmware | 2020-08-24 | 5.0 MEDIUM | 9.8 CRITICAL |
| The D-Link DIR-816 A2 1.11 router only checks the random token when authorizing a goform request. An attacker can get this token from dir_login.asp and use an API URL /goform/setSysAdm to edit the web or system account without authentication. | |||||
| CVE-2019-10040 | 1 Dlink | 2 Dir-816, Dir-816 Firmware | 2020-08-24 | 10.0 HIGH | 9.8 CRITICAL |
| The D-Link DIR-816 A2 1.11 router only checks the random token when authorizing a goform request. An attacker can get this token from dir_login.asp and use a hidden API URL /goform/SystemCommand to execute a system command without authentication. | |||||