Search
Total
49350 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2016-10179 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. There is a hardcoded WPS PIN of 28296607. | |||||
| CVE-2016-10186 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. /var/miniupnpd.conf has no deny rules. | |||||
| CVE-2017-8414 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2021-04-23 | 7.2 HIGH | 7.8 HIGH |
| An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary orthrus in /sbin folder of the device handles all the UPnP connections received by the device. It seems that the binary performs a sprintf operation at address 0x0000A3E4 with the value in the command line parameter "-f" and stores it on the stack. Since there is no length check, this results in corrupting the registers for the function sub_A098 which results in memory corruption. | |||||
| CVE-2016-10180 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. WPS PIN generation is based on srand(time(0)) seeding. | |||||
| CVE-2016-10183 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. qmiweb allows directory listing with ../ traversal. | |||||
| CVE-2016-10185 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. A secure_mode=no line exists in /var/miniupnpd.conf. | |||||
| CVE-2016-10181 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. qmiweb provides sensitive information for CfgType=get_homeCfg requests. | |||||
| CVE-2016-10184 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. qmiweb allows file reading with ..%2f traversal. | |||||
| CVE-2020-25758 | 1 Dlink | 20 Dsr-1000, Dsr-1000 Firmware, Dsr-1000ac and 17 more | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DSR-250 3.17 devices. Insufficient validation of configuration file checksums could allow a remote, authenticated attacker to inject arbitrary crontab entries into saved configurations before uploading. These entries are executed as root. | |||||
| CVE-2019-6969 | 1 Dlink | 2 Dva-5592, Dva-5592 Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| The web interface of the D-Link DVA-5592 20180823 is vulnerable to an authentication bypass that allows an unauthenticated user to have access to sensitive information such as the Wi-Fi password and the phone number (if VoIP is in use). | |||||
| CVE-2021-30245 | 1 Apache | 1 Openoffice | 2021-04-23 | 6.8 MEDIUM | 8.8 HIGH |
| The project received a report that all versions of Apache OpenOffice through 4.1.8 can open non-http(s) hyperlinks. The problem has existed since about 2006 and the issue is also in 4.1.9. If the link is specifically crafted this could lead to untrusted code execution. It is always best practice to be careful opening documents from unknown and unverified sources. The mitigation in Apache OpenOffice 4.1.10 (unreleased) assures that a security warning is displayed giving the user the option of continuing to open the hyperlink. | |||||
| CVE-2019-14332 | 1 Dlink | 4 6600-ap, 6600-ap Firmware, Dwl-3600ap and 1 more | 2021-04-23 | 4.6 MEDIUM | 7.8 HIGH |
| An issue was discovered on D-Link 6600-AP and DWL-3600AP Ax 4.2.0.14 21/03/2019 devices. There is use of weak ciphers for SSH such as diffie-hellman-group1-sha1. | |||||
| CVE-2020-8864 | 1 Dlink | 6 Dir-867, Dir-867 Firmware, Dir-878 and 3 more | 2021-04-23 | 8.3 HIGH | 8.8 HIGH |
| This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper handling of empty passwords. An attacker can leverage this vulnerability to execute arbitrary code on the router. Was ZDI-CAN-9471. | |||||
| CVE-2020-8863 | 1 Dlink | 6 Dir-867, Dir-867 Firmware, Dir-878 and 3 more | 2021-04-23 | 8.3 HIGH | 8.8 HIGH |
| This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the router. Was ZDI-CAN-9470. | |||||
| CVE-2020-13150 | 1 Dlink | 2 Dsl-2750u, Dsl-2750u Firmware | 2021-04-23 | 4.6 MEDIUM | 7.8 HIGH |
| D-link DSL-2750U ISL2750UEME3.V1E devices allow approximately 90 seconds of access to the control panel, after a restart, before MAC address filtering rules become active. | |||||
| CVE-2020-24577 | 1 Dlink | 2 Dsl-2888a, Dsl-2888a Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on D-Link DSL-2888A devices with firmware prior to AU_2.31_V1.1.47ae55. The One Touch application discloses sensitive information, such as the hashed admin login password and the Internet provider connection username and cleartext password, in the application's response body for a /tmp/var/passwd or /tmp/home/wan_stat URI. | |||||
| CVE-2020-27862 | 1 Dlink | 4 Dsl-2888a, Dsl-2888a Firmware, Dva-2800 and 1 more | 2021-04-23 | 5.8 MEDIUM | 8.8 HIGH |
| This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DVA-2800 and DSL-2888A routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the dhttpd service, which listens on TCP port 8008 by default. When parsing the path parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the web server. Was ZDI-CAN-10911. | |||||
| CVE-2019-8319 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv4Settings API function, as demonstrated by shell metacharacters in the Gateway field. | |||||
| CVE-2019-8318 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metacharacters in the SMTPServerPort field. | |||||
| CVE-2019-8317 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv6Settings API function, as demonstrated by shell metacharacters in the DestNetwork field. | |||||
| CVE-2019-8316 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWebFilterSettings API function, as demonstrated by shell metacharacters in the WebFilterURLs field. | |||||
| CVE-2019-8313 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv6FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv6AddressRangeStart field. | |||||
| CVE-2019-8314 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetQoSSettings API function, as demonstrated by shell metacharacters in the IPAddress field. | |||||
| CVE-2019-8315 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv4FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv4AddressRangeStart field. | |||||
| CVE-2019-8312 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysLogSettings API function, as demonstrated by shell metacharacters in the IPAddress field. | |||||
| CVE-2019-13563 | 1 Dlink | 2 Dir-655, Dir-655 Firmware | 2021-04-23 | 6.8 MEDIUM | 8.8 HIGH |
| D-Link DIR-655 C devices before 3.02B05 BETA03 allow CSRF for the entire management console. | |||||
| CVE-2019-17353 | 1 Dlink | 2 Dir-615, Dir-615 Firmware | 2021-04-23 | 6.4 MEDIUM | 8.2 HIGH |
| An issue discovered on D-Link DIR-615 devices with firmware version 20.05 and 20.07. wan.htm can be accessed directly without authentication, which can lead to disclosure of information about the WAN, and can also be leveraged by an attacker to modify the data fields of the page. | |||||
| CVE-2019-13481 | 1 Dlink | 2 Dir-818lw, Dir-818lw Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the MTU field to SetWanSettings. | |||||
| CVE-2017-8416 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2021-04-23 | 8.3 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device runs a custom daemon on UDP port 5978 which is called "dldps2121" and listens for broadcast packets sent on 255.255.255.255. This daemon handles custom D-Link UDP based protocol that allows D-Link mobile applications and desktop applications to discover D-Link devices on the local network. The binary processes the received UDP packets sent from any device in "main" function. One path in the function traverses towards a block of code that processing of packets which does an unbounded copy operation which allows to overflow the buffer. The custom protocol created by Dlink follows the following pattern: Packetlen, Type of packet; M=MAC address of device or broadcast; D=Device Type;C=base64 encoded command string;test=1111 We can see at address function starting at address 0x0000DBF8 handles the entire UDP packet and performs an insecure copy using strcpy function at address 0x0000DC88. This results in overflowing the stack pointer after 1060 characters and thus allows to control the PC register and results in code execution. The same form of communication can be initiated by any process including an attacker process on the mobile phone or the desktop and this allows a third-party application on the device to execute commands on the device without any authentication by sending just 1 UDP packet with custom base64 encoding. | |||||
| CVE-2017-8413 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2021-04-23 | 8.3 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device runs a custom daemon on UDP port 5978 which is called "dldps2121" and listens for broadcast packets sent on 255.255.255.255. This daemon handles custom D-Link UDP based protocol that allows D-Link mobile applications and desktop applications to discover D-Link devices on the local network. The binary processes the received UDP packets sent from any device in "main" function. One path in the function traverses towards a block of code that handles commands to be executed on the device. The custom protocol created by D-Link follows the following pattern: Packetlen, Type of packet; M=MAC address of device or broadcast; D=Device Type;C=base64 encoded command string;test=1111. If a packet is received with the packet type being "S" or 0x53 then the string passed in the "C" parameter is base64 decoded and then executed by passing into a System API. We can see at address 0x00009B44 that the string received in packet type subtracts 0x31 or "1" from the packet type and is compared against 0x22 or "double quotes". If that is the case, then the packet is sent towards the block of code that executes a command. Then the value stored in "C" parameter is extracted at address 0x0000A1B0. Finally, the string received is base 64 decoded and passed on to the system API at address 0x0000A2A8 as shown below. The same form of communication can be initiated by any process including an attacker process on the mobile phone or the desktop and this allows a third-party application on the device to execute commands on the device without any authentication by sending just 1 UDP packet with custom base64 encoding. | |||||
| CVE-2021-27253 | 1 Netgear | 84 Br200, Br200 Firmware, Br500 and 81 more | 2021-04-23 | 8.3 HIGH | 8.8 HIGH |
| This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR Nighthawk R7800. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the rc_service parameter provided to apply_bind.cgi. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12303. | |||||
| CVE-2021-20992 | 1 Fibaro | 4 Home Center 2, Home Center 2 Firmware, Home Center Lite and 1 more | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| In Fibaro Home Center 2 and Lite devices in all versions provide a web based management interface over unencrypted HTTP protocol. Communication between the user and the device can be eavesdropped to hijack sessions, tokens and passwords. | |||||
| CVE-2019-12786 | 1 Dlink | 2 Dir-818lw, Dir-818lw Firmware | 2021-04-23 | 6.5 MEDIUM | 8.8 HIGH |
| An issue was discovered on D-Link DIR-818LW devices from 2.05.B03 to 2.06B01 BETA. There is a command injection in HNAP1 SetWanSettings via an XML injection of the value of the IPAddress key. | |||||
| CVE-2019-7642 | 1 Dlink | 10 Dir-816, Dir-816 Firmware, Dir-816l and 7 more | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| D-Link routers with the mydlink feature have some web interfaces without authentication requirements. An attacker can remotely obtain users' DNS query logs and login logs. Vulnerable targets include but are not limited to the latest firmware versions of DIR-817LW (A1-1.04), DIR-816L (B1-2.06), DIR-816 (B1-2.06?), DIR-850L (A1-1.09), and DIR-868L (A1-1.10). | |||||
| CVE-2021-28143 | 1 Dlink | 2 Dir-841, Dir-841 Firmware | 2021-04-23 | 7.7 HIGH | 8.0 HIGH |
| /jsonrpc on D-Link DIR-841 3.03 and 3.04 devices allows authenticated command injection via ping, ping6, or traceroute (under System Tools). | |||||
| CVE-2019-13482 | 1 Dlink | 2 Dir-818lw, Dir-818lw Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Type field to SetWanSettings. | |||||
| CVE-2021-20990 | 1 Fibaro | 4 Home Center 2, Home Center 2 Firmware, Home Center Lite and 1 more | 2021-04-23 | 7.8 HIGH | 7.5 HIGH |
| In Fibaro Home Center 2 and Lite devices with firmware version 4.600 and older an internal management service is accessible on port 8000 and some API endpoints could be accessed without authentication to trigger a shutdown, a reboot or a reboot into recovery mode. | |||||
| CVE-2020-13960 | 1 Dlink | 4 Dir-600m, Dir-600m Firmware, Dsl-2730u and 1 more | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| D-Link DSL 2730-U IN_1.10 and IN_1.11 and DIR-600M 3.04 devices have the domain.name string in the DNS resolver search path by default, which allows remote attackers to provide valid DNS responses (and also offer Internet services such as HTTP) for names that otherwise would have had an NXDOMAIN error, by registering a subdomain of the domain.name domain name. | |||||
| CVE-2017-7404 | 1 Dlink | 1 Dir-615 | 2021-04-23 | 6.8 MEDIUM | 8.8 HIGH |
| On the D-Link DIR-615 before v20.12PTb04, if a victim logged in to the Router's Web Interface visits a malicious site from another Browser tab, the malicious site then can send requests to the victim's Router without knowing the credentials (CSRF). An attacker can host a page that sends a POST request to Form2File.htm that tries to upload Firmware to victim's Router. This causes the router to reboot/crash resulting in Denial of Service. An attacker may succeed in uploading malicious Firmware. | |||||
| CVE-2021-20527 | 1 Ibm | 1 Resilient | 2021-04-23 | 6.5 MEDIUM | 7.2 HIGH |
| IBM Resilient SOAR V38.0 could allow a privileged user to create create malicious scripts that could be executed as another user. IBM X-Force ID: 198759. | |||||
| CVE-2021-28144 | 1 Dlink | 2 Dir-3060, Dir-3060 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| prog.cgi on D-Link DIR-3060 devices before 1.11b04 HF2 allows remote authenticated users to inject arbitrary commands in an admin or root context because SetVirtualServerSettings calls CheckArpTables, which calls popen unsafely. | |||||
| CVE-2021-21405 | 1 Filecoin | 1 Lotus | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| Lotus is an Implementation of the Filecoin protocol written in Go. BLS signature validation in lotus uses blst library method VerifyCompressed. This method accepts signatures in 2 forms: "serialized", and "compressed", meaning that BLS signatures can be provided as either of 2 unique byte arrays. Lotus block validation functions perform a uniqueness check on provided blocks. Two blocks are considered distinct if the CIDs of their blockheader do not match. The CID method for blockheader includes the BlockSig of the block. The result of these issues is that it would be possible to punish miners for valid blocks, as there are two different valid block CIDs available for each block, even though this must be unique. By switching from the go based `blst` bindings over to the bindings in `filecoin-ffi`, the code paths now ensure that all signatures are compressed by size and the way they are deserialized. This happened in https://github.com/filecoin-project/lotus/pull/5393. | |||||
| CVE-2016-11021 | 1 Dlink | 2 Dcs-930l, Dcs-930l Firmware | 2021-04-23 | 9.0 HIGH | 7.2 HIGH |
| setSystemCommand on D-Link DCS-930L devices before 2.12 allows a remote attacker to execute code via an OS command in the SystemCommand parameter. | |||||
| CVE-2017-9100 | 1 Dlink | 2 Dir-600m, Dir-600m Firmware | 2021-04-23 | 8.3 HIGH | 8.8 HIGH |
| login.cgi on D-Link DIR-600M devices with firmware 3.04 allows remote attackers to bypass authentication by entering more than 20 blank spaces in the password field during an admin login attempt. | |||||
| CVE-2021-25380 | 1 Samsung | 1 Bixby | 2021-04-23 | 7.5 HIGH | 7.3 HIGH |
| Improper handling of exceptional conditions in Bixby prior to version 3.0.53.02 allows attacker to execute the actions registered by the user. | |||||
| CVE-2020-7851 | 4 Apple, Innorix, Linux and 1 more | 4 Macos, File Transfer Solution, Linux Kernel and 1 more | 2021-04-23 | 6.8 MEDIUM | 7.8 HIGH |
| Innorix Web-Based File Transfer Solution versuibs prior to and including 9.2.18.385 contains a vulnerability that could allow remote files to be downloaded and executed by setting the arguments to the internal method. A remote attacker could induce a user to access a crafted web page, causing damage such as malicious code infection. | |||||
| CVE-2017-10850 | 1 Fujifilm | 2 Apeosport-vi, Docucentre-vi | 2021-04-23 | 9.3 HIGH | 7.8 HIGH |
| Untrusted search path vulnerability in Installers of ART EX Driver for ApeosPort-VI C7771/C6671/C5571/C4471/C3371/C2271, DocuCentre-VI C7771/C6671/C5571/C4471/C3371/C2271 (Timestamp of code signing is before 12 Apr 2017 02:04 UTC.), PostScript? Driver + Additional Feature Plug-in + PPD File for ApeosPort-VI C7771/C6671/C5571/C4471/C3371/C2271, DocuCentre-VI C7771/C6671/C5571/C4471/C3371/C2271 (Timestamp of code signing is before 12 Apr 2017 02:10 UTC.), XPS Print Driver for ApeosPort-VI C7771/C6671/C5571/C4471/C3371/C2271, DocuCentre-VI C7771/C6671/C5571/C4471/C3371/C2271 (Timestamp of code signing is before 3 Nov 2017 23:48 UTC.), ART EX Direct FAX Driver for ApeosPort-VI C7771/C6671/C5571/C4471/C3371/C2271, DocuCentre-VI C7771/C6671/C5571/C4471/C3371/C2271 (Timestamp of code signing is before 26 May 2017 07:44 UTC.), Setting Restore Tool for ApeosPort-VI C7771/C6671/C5571/C4471/C3371/C2271, DocuCentre-VI C7771/C6671/C5571/C4471/C3371/C2271 (Timestamp of code signing is before 25 Aug 2015 08:51 UTC.) allows an attacker to gain privileges via a Trojan horse DLL in an unspecified directory. | |||||
| CVE-2021-23380 | 1 Roar-pidusage Project | 1 Roar-pidusage | 2021-04-23 | 7.5 HIGH | 7.3 HIGH |
| This affects all versions of package roar-pidusage. If attacker-controlled user input is given to the stat function of this package on certain operating systems, it is possible for an attacker to execute arbitrary commands. This is due to use of the child_process exec function without input sanitization. | |||||
| CVE-2020-12695 | 18 Asus, Broadcom, Canon and 15 more | 257 Rt-n11, Adsl, Selphy Cp1200 and 254 more | 2021-04-23 | 7.8 HIGH | 7.5 HIGH |
| The Open Connectivity Foundation UPnP specification before 2020-04-17 does not forbid the acceptance of a subscription request with a delivery URL on a different network segment than the fully qualified event-subscription URL, aka the CallStranger issue. | |||||
| CVE-2019-13925 | 1 Siemens | 8 Scalance S602, Scalance S602 Firmware, Scalance S612 and 5 more | 2021-04-22 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability has been identified in SCALANCE S602 (All versions >= V3.0 and < V4.1), SCALANCE S612 (All versions >= V3.0 and < V4.1), SCALANCE S623 (All versions >= V3.0 and < V4.1), SCALANCE S627-2M (All versions >= V3.0 and < V4.1). Specially crafted packets sent to port 443/tcp of affected devices could cause a Denial-of-Service condition of the web server. | |||||