Search
Total
47 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-20795 | 1 Cisco | 29 Adaptive Security Appliance, Adaptive Security Appliance Software, Asa 5505 and 26 more | 2023-08-16 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the implementation of the Datagram TLS (DTLS) protocol in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization, resulting in a denial of service (DoS) condition. This vulnerability is due to suboptimal processing that occurs when establishing a DTLS tunnel as part of an AnyConnect SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted DTLS traffic to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected VPN headend device. This could cause existing DTLS tunnels to stop passing traffic and prevent new DTLS tunnels from establishing, resulting in a DoS condition. Note: When the attack traffic stops, the device recovers gracefully. | |||||
| CVE-2020-3457 | 1 Cisco | 29 Adaptive Security Appliance Software, Firepower 1000, Firepower 1010 and 26 more | 2023-08-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges. | |||||
| CVE-2020-3166 | 1 Cisco | 19 Adaptive Security Appliance Software, Firepower 1010, Firepower 1120 and 16 more | 2023-08-15 | 4.6 MEDIUM | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to read or write arbitrary files on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to a specific CLI command. A successful exploit could allow the attacker to read or write to arbitrary files on the underlying OS. | |||||
| CVE-2020-3167 | 1 Cisco | 27 Adaptive Security Appliance Software, Firepower 1010, Firepower 1120 and 24 more | 2023-08-15 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges. | |||||
| CVE-2018-0240 | 1 Cisco | 47 7604, 7606-s, 7609-s and 44 more | 2023-08-15 | 7.8 HIGH | 8.6 HIGH |
| Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456. | |||||
| CVE-2021-44228 | 10 Apache, Bentley, Cisco and 7 more | 155 Log4j, Synchro, Synchro 4d and 152 more | 2022-07-22 | 9.3 HIGH | 10.0 CRITICAL |
| Apache Log4j2 2.0-beta9 through 2.15.0 (excluding security releases 2.12.2, 2.12.3, and 2.3.1) JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.15.0, this behavior has been disabled by default. From version 2.16.0 (along with 2.12.2, 2.12.3, and 2.3.1), this functionality has been completely removed. Note that this vulnerability is specific to log4j-core and does not affect log4net, log4cxx, or other Apache Logging Services projects. | |||||
| CVE-2022-20829 | 1 Cisco | 25 Adaptive Security Device Manager, Asa 5512-x, Asa 5512-x Firmware and 22 more | 2022-07-06 | 9.0 HIGH | 7.2 HIGH |
| A vulnerability in the packaging of Cisco Adaptive Security Device Manager (ASDM) images and the validation of those images by Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker with administrative privileges to upload an ASDM image that contains malicious code to a device that is running Cisco ASA Software. This vulnerability is due to insufficient validation of the authenticity of an ASDM image during its installation on a device that is running Cisco ASA Software. An attacker could exploit this vulnerability by installing a crafted ASDM image on the device that is running Cisco ASA Software and then waiting for a targeted user to access that device using ASDM. A successful exploit could allow the attacker to execute arbitrary code on the machine of the targeted user with the privileges of that user on that machine. Notes: To successfully exploit this vulnerability, the attacker must have administrative privileges on the device that is running Cisco ASA Software. Potential targets are limited to users who manage the same device that is running Cisco ASA Software using ASDM. Cisco has released and will release software updates that address this vulnerability. | |||||
| CVE-2022-20828 | 1 Cisco | 20 Asa Firepower, Firepower 1010, Firepower 1120 and 17 more | 2022-07-06 | 9.0 HIGH | 7.2 HIGH |
| A vulnerability in the CLI parser of Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected ASA FirePOWER module as the root user. This vulnerability is due to improper handling of undefined command parameters. An attacker could exploit this vulnerability by using a crafted command on the CLI or by submitting a crafted HTTPS request to the web-based management interface of the Cisco ASA that is hosting the ASA FirePOWER module. Note: To exploit this vulnerability, the attacker must have administrative access to the Cisco ASA. A user who has administrative access to a particular Cisco ASA is also expected to have administrative access to the ASA FirePOWER module that is hosted by that Cisco ASA. | |||||
| CVE-2022-20751 | 1 Cisco | 23 Firepower 1000, Firepower 1010, Firepower 1020 and 20 more | 2022-05-13 | 7.1 HIGH | 7.5 HIGH |
| A vulnerability in the Snort detection engine integration for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause unlimited memory consumption, which could lead to a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient memory management for certain Snort events. An attacker could exploit this vulnerability by sending a series of crafted IP packets that would generate specific Snort events on an affected device. A sustained attack could cause an out of memory condition on the affected device. A successful exploit could allow the attacker to interrupt all traffic flowing through the affected device. In some circumstances, the attacker may be able to cause the device to reload, resulting in a DoS condition. | |||||
| CVE-2020-3545 | 1 Cisco | 10 Firepower 4110, Firepower 4112, Firepower 4115 and 7 more | 2021-10-19 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in Cisco FXOS Software could allow an authenticated, local attacker with administrative credentials to cause a buffer overflow condition. The vulnerability is due to incorrect bounds checking of values that are parsed from a specific file. An attacker could exploit this vulnerability by supplying a crafted file that, when it is processed, may cause a stack-based buffer overflow. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system with root privileges. An attacker would need to have valid administrative credentials to exploit this vulnerability. | |||||
| CVE-2020-3571 | 1 Cisco | 9 Firepower 4110, Firepower 4112, Firepower 4115 and 6 more | 2021-10-19 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the ICMP ingress packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 4110 appliances could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete input validation upon receiving ICMP packets. An attacker could exploit this vulnerability by sending a high number of crafted ICMP or ICMPv6 packets to an affected device. A successful exploit could allow the attacker to cause a memory exhaustion condition that may result in an unexpected reload. No manual intervention is needed to recover the device after the reload. | |||||
| CVE-2021-34714 | 1 Cisco | 225 Firepower 4100, Firepower 4110, Firepower 4112 and 222 more | 2021-10-13 | 5.7 MEDIUM | 7.4 HIGH |
| A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software, Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. This vulnerability is due to improper input validation of the UDLD packets. An attacker could exploit this vulnerability by sending specifically crafted UDLD packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. An attacker must have full control of a directly connected device. On Cisco IOS XR devices, the impact is limited to the reload of the UDLD process. | |||||
| CVE-2021-1448 | 1 Cisco | 10 Firepower 4110, Firepower 4112, Firepower 4115 and 7 more | 2021-05-09 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges. | |||||
| CVE-2021-1489 | 1 Cisco | 18 Firepower 1010, Firepower 1120, Firepower 1140 and 15 more | 2021-05-09 | 6.8 MEDIUM | 6.5 MEDIUM |
| A vulnerability in filesystem usage management for Cisco Firepower Device Manager (FDM) Software could allow an authenticated, remote attacker to exhaust filesystem resources, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to the insufficient management of available filesystem resources. An attacker could exploit this vulnerability by uploading files to the device and exhausting available filesystem resources. A successful exploit could allow the attacker to cause database errors and cause the device to become unresponsive to web-based management. Manual intervention is required to free filesystem resources and return the device to an operational state. | |||||
| CVE-2021-1368 | 1 Cisco | 101 Firepower 4110, Firepower 4112, Firepower 4115 and 98 more | 2021-03-03 | 4.9 MEDIUM | 8.8 HIGH |
| A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted Cisco UDLD protocol packets to a directly connected, affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the Cisco UDLD process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. The attacker needs full control of a directly connected device. That device must be connected over a port channel that has UDLD enabled. To trigger arbitrary code execution, both the UDLD-enabled port channel and specific system conditions must exist. In the absence of either the UDLD-enabled port channel or the system conditions, attempts to exploit this vulnerability will result in a DoS condition. It is possible, but highly unlikely, that an attacker could control the necessary conditions for exploitation. The CVSS score reflects this possibility. However, given the complexity of exploitation, Cisco has assigned a Medium Security Impact Rating (SIR) to this vulnerability. | |||||
| CVE-2020-3459 | 1 Cisco | 17 Firepower 4110, Firepower 4112, Firepower 4115 and 14 more | 2020-10-30 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges. | |||||
| CVE-2020-3455 | 1 Cisco | 17 Firepower 4110, Firepower 4112, Firepower 4115 and 14 more | 2020-10-28 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the secure boot process of Cisco FXOS Software could allow an authenticated, local attacker to bypass the secure boot mechanisms. The vulnerability is due to insufficient protections of the secure boot process. An attacker could exploit this vulnerability by injecting code into a specific file that is then referenced during the device boot process. A successful exploit could allow the attacker to break the chain of trust and inject code into the boot process of the device which would be executed at each boot and maintain persistence across reboots. | |||||
| CVE-2020-3456 | 1 Cisco | 17 Firepower 4110, Firepower 4112, Firepower 4115 and 14 more | 2020-10-28 | 6.8 MEDIUM | 8.8 HIGH |
| A vulnerability in the Cisco Firepower Chassis Manager (FCM) of Cisco FXOS Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack against a user of an affected device. The vulnerability is due to insufficient CSRF protections for the FCM interface. An attacker could exploit this vulnerability by persuading a targeted user to click a malicious link. A successful exploit could allow the attacker to send arbitrary requests that could take unauthorized actions on behalf of the targeted user. | |||||
| CVE-2019-1795 | 1 Cisco | 144 7000 10-slot, 7000 18-slot, 7000 4-slot and 141 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with the privilege level of root. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. | |||||
| CVE-2019-1781 | 1 Cisco | 97 Firepower 4110, Firepower 4120, Firepower 4140 and 94 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability. | |||||
| CVE-2019-1782 | 1 Cisco | 97 Firepower 4110, Firepower 4120, Firepower 4140 and 94 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need administrator credentials to exploit this vulnerability. | |||||
| CVE-2019-1779 | 1 Cisco | 90 Firepower 4110, Firepower 4112, Firepower 4115 and 87 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system of an affected device with elevated privileges. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid device credentials to exploit this vulnerability. | |||||
| CVE-2019-1780 | 1 Cisco | 92 Firepower 4110, Firepower 4115, Firepower 4120 and 89 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker with administrator credentials to execute arbitrary commands on the underlying operating system of an affected device with elevated privileges. The vulnerability is due to insufficient validation of arguments passed to certain CLI commands. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with elevated privileges. An attacker would need valid administrator credentials to exploit this vulnerability. NX-OS versions prior to 8.3(1) are affected. NX-OS versions prior to 8.3(1) are affected. | |||||
| CVE-2019-1858 | 1 Cisco | 139 7000 10-slot, 7000 18-slot, 7000 4-slot and 136 more | 2020-10-16 | 5.0 MEDIUM | 8.6 HIGH |
| A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the SNMP application to leak system memory, which could cause an affected device to restart unexpectedly. The vulnerability is due to improper error handling when processing inbound SNMP packets. An attacker could exploit this vulnerability by sending multiple crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the SNMP application to leak system memory because of an improperly handled error condition during packet processing. Over time, this memory leak could cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. | |||||
| CVE-2019-1734 | 1 Cisco | 94 Firepower 4110, Firepower 4112, Firepower 4115 and 91 more | 2020-10-16 | 2.1 LOW | 5.5 MEDIUM |
| A vulnerability in the implementation of a CLI diagnostic command in Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to view sensitive system files that should be restricted. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to incomplete role-based access control (RBAC) verification. An attacker could exploit this vulnerability by authenticating to the device and issuing a specific CLI diagnostic command with crafted user-input parameters. An exploit could allow the attacker to perform an arbitrary read of a file on the device, and the file may contain sensitive information. The attacker needs valid device credentials to exploit this vulnerability. | |||||
| CVE-2019-1690 | 1 Cisco | 100 Application Policy Infrastructure Controller, Firepower 2110, Firepower 2120 and 97 more | 2020-10-16 | 3.3 LOW | 6.5 MEDIUM |
| A vulnerability in the management interface of Cisco Application Policy Infrastructure Controller (APIC) software could allow an unauthenticated, adjacent attacker to gain unauthorized access on an affected device. The vulnerability is due to a lack of proper access control mechanisms for IPv6 link-local connectivity imposed on the management interface of an affected device. An attacker on the same physical network could exploit this vulnerability by attempting to connect to the IPv6 link-local address on the affected device. A successful exploit could allow the attacker to bypass default access control restrictions on an affected device. Cisco Application Policy Infrastructure Controller (APIC) devices running versions prior to 4.2(0.21c) are affected. | |||||
| CVE-2019-1649 | 1 Cisco | 190 1120 Connected Grid Router, 1240 Connected Grid Router, 15454-m-wse-k9 and 187 more | 2020-10-16 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the logic that handles access control to one of the hardware components in Cisco's proprietary Secure Boot implementation could allow an authenticated, local attacker to write a modified firmware image to the component. This vulnerability affects multiple Cisco products that support hardware-based Secure Boot functionality. The vulnerability is due to an improper check on the area of code that manages on-premise updates to a Field Programmable Gate Array (FPGA) part of the Secure Boot hardware implementation. An attacker with elevated privileges and access to the underlying operating system that is running on the affected device could exploit this vulnerability by writing a modified firmware image to the FPGA. A successful exploit could either cause the device to become unusable (and require a hardware replacement) or allow tampering with the Secure Boot verification process, which under some circumstances may allow the attacker to install and boot a malicious software image. An attacker will need to fulfill all the following conditions to attempt to exploit this vulnerability: Have privileged administrative access to the device. Be able to access the underlying operating system running on the device; this can be achieved either by using a supported, documented mechanism or by exploiting another vulnerability that would provide an attacker with such access. Develop or have access to a platform-specific exploit. An attacker attempting to exploit this vulnerability across multiple affected platforms would need to research each one of those platforms and then develop a platform-specific exploit. Although the research process could be reused across different platforms, an exploit developed for a given hardware platform is unlikely to work on a different hardware platform. | |||||
| CVE-2019-12696 | 1 Cisco | 23 Asa 5500-x, Firepower, Firepower 1010 and 20 more | 2020-10-08 | 5.0 MEDIUM | 7.5 HIGH |
| Multiple vulnerabilities in the Cisco Firepower System Software Detection Engine could allow an unauthenticated, remote attacker to bypass configured Malware and File Policies for RTF and RAR file types. For more information about these vulnerabilities, see the Details section of this advisory. | |||||
| CVE-2019-12697 | 1 Cisco | 23 Asa 5500-x, Firepower, Firepower 1010 and 20 more | 2020-10-08 | 5.0 MEDIUM | 7.5 HIGH |
| Multiple vulnerabilities in the Cisco Firepower System Software Detection Engine could allow an unauthenticated, remote attacker to bypass configured Malware and File Policies for RTF and RAR file types. For more information about these vulnerabilities, see the Details section of this advisory. | |||||
| CVE-2020-3504 | 1 Cisco | 108 Firepower 1010, Firepower 1120, Firepower 1140 and 105 more | 2020-09-04 | 2.1 LOW | 3.3 LOW |
| A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of CLI command parameters. An attacker could exploit this vulnerability by executing specific commands on the local-mgmt CLI on an affected device. A successful exploit could allow the attacker to cause internal system processes to fail to terminate properly, which could result in a buildup of stuck processes and lead to slowness in accessing the UCS Manager CLI and web UI. A sustained attack may result in a restart of internal UCS Manager processes and a temporary loss of access to the UCS Manager CLI and web UI. | |||||
| CVE-2020-3517 | 1 Cisco | 98 Firepower 4110, Firepower 4112, Firepower 4115 and 95 more | 2020-09-04 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated attacker to cause process crashes, which could result in a denial of service (DoS) condition on an affected device. The attack vector is configuration dependent and could be remote or adjacent. For more information about the attack vector, see the Details section of this advisory. The vulnerability is due to insufficient error handling when the affected software parses Cisco Fabric Services messages. An attacker could exploit this vulnerability by sending malicious Cisco Fabric Services messages to an affected device. A successful exploit could allow the attacker to cause a reload of an affected device, which could result in a DoS condition. | |||||
| CVE-2018-0302 | 1 Cisco | 13 Firepower 4110, Firepower 4120, Firepower 4140 and 10 more | 2020-09-04 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI parser of Cisco FXOS Software and Cisco UCS Fabric Interconnect Software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to incorrect input validation in the CLI parser subsystem. An attacker could exploit this vulnerability by exceeding the expected length of user input. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61099, CSCvb86743. | |||||
| CVE-2018-0331 | 1 Cisco | 77 Firepower 4110, Firepower 4120, Firepower 4140 and 74 more | 2020-08-31 | 6.1 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Cisco Discovery Protocol (formerly known as CDP) subsystem of devices running, or based on, Cisco NX-OS Software contain a vulnerability that could allow an unauthenticated, adjacent attacker to create a denial of service (DoS) condition. The vulnerability is due to a failure to properly validate certain fields within a Cisco Discovery Protocol message prior to processing it. An attacker with the ability to submit a Cisco Discovery Protocol message designed to trigger the issue could cause a DoS condition on an affected device while the device restarts. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc89242, CSCve40943, CSCve40953, CSCve40965, CSCve40970, CSCve40978, CSCve40992, CSCve41000, CSCve41007. | |||||
| CVE-2020-3172 | 1 Cisco | 107 Firepower 4110, Firepower 4115, Firepower 4120 and 104 more | 2020-03-05 | 8.3 HIGH | 8.8 HIGH |
| A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Note: This vulnerability is different from the following Cisco FXOS and NX-OS Software Cisco Discovery Protocol vulnerabilities that Cisco announced on Feb. 5, 2020: Cisco FXOS, IOS XR, and NX-OS Software Cisco Discovery Protocol Denial of Service Vulnerability and Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability. | |||||
| CVE-2020-3171 | 1 Cisco | 21 Firepower 2110, Firepower 2120, Firepower 2130 and 18 more | 2020-03-03 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the local management (local-mgmt) CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges. | |||||
| CVE-2020-3169 | 1 Cisco | 16 Firepower 4110, Firepower 4115, Firepower 4120 and 13 more | 2020-02-28 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root on an affected device. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. An attacker would need valid administrator credentials to exploit this vulnerability. | |||||
| CVE-2020-3120 | 1 Cisco | 143 Asr 9000v, Asr 9001, Asr 9006 and 140 more | 2020-02-11 | 6.1 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). | |||||
| CVE-2019-1963 | 1 Cisco | 130 7000 10-slot, 7000 18-slot, 7000 4-slot and 127 more | 2019-10-09 | 6.8 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of Abstract Syntax Notation One (ASN.1)-encoded variables in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the SNMP daemon on the affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. | |||||
| CVE-2019-12675 | 1 Cisco | 17 Firepower 4110, Firepower 4110 Firmware, Firepower 4115 and 14 more | 2019-10-09 | 7.2 HIGH | 8.8 HIGH |
| Multiple vulnerabilities in the multi-instance feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to escape the container for their FTD instance and execute commands with root privileges in the host namespace. These vulnerabilities are due to insufficient protections on the underlying filesystem. An attacker could exploit these vulnerabilities by modifying critical files on the underlying filesystem. A successful exploit could allow the attacker to execute commands with root privileges within the host namespace. This could allow the attacker to impact other running FTD instances. | |||||
| CVE-2019-12674 | 1 Cisco | 17 Firepower 4110, Firepower 4110 Firmware, Firepower 4115 and 14 more | 2019-10-09 | 7.2 HIGH | 8.2 HIGH |
| Multiple vulnerabilities in the multi-instance feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to escape the container for their FTD instance and execute commands with root privileges in the host namespace. These vulnerabilities are due to insufficient protections on the underlying filesystem. An attacker could exploit these vulnerabilities by modifying critical files on the underlying filesystem. A successful exploit could allow the attacker to execute commands with root privileges within the host namespace. This could allow the attacker to impact other running FTD instances. | |||||
| CVE-2018-0310 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2019-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to obtain sensitive information from memory or cause a denial of service (DoS) condition on the affected product. The vulnerability exists because the affected software insufficiently validates header values in Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overread condition, which could allow the attacker to obtain sensitive information from memory or cause a DoS condition on the affected product. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69957, CSCve02435, CSCve04859, CSCve41536, CSCve41538, CSCve41559. | |||||
| CVE-2018-0303 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2019-10-09 | 8.3 HIGH | 8.8 HIGH |
| A vulnerability in the Cisco Discovery Protocol component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on the affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2 adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. This vulnerability affects the following if configured to use Cisco Discovery Protocol: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc22202, CSCvc22205, CSCvc22208, CSCvc88078, CSCvc88150, CSCvc88159, CSCvc88162, CSCvc88167. | |||||
| CVE-2018-0294 | 1 Cisco | 74 Firepower 4110, Firepower 4120, Firepower 4140 and 71 more | 2019-10-09 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the write-erase feature of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to configure an unauthorized administrator account for an affected device. The vulnerability exists because the affected software does not properly delete sensitive files when certain CLI commands are used to clear the device configuration and reload a device. An attacker could exploit this vulnerability by logging into an affected device as an administrative user and configuring an unauthorized account for the device. The account would not require a password for authentication and would be accessible only via a Secure Shell (SSH) connection to the device. A successful exploit could allow the attacker to configure an unauthorized account that has administrative privileges, does not require a password for authentication, and does not appear in the running configuration or the audit logs for the affected device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3500 Platform Switches, Nexus 4000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd13993, CSCvd34845, CSCvd34857, CSCvd34862, CSCvd34879, CSCve35753. | |||||
| CVE-2018-0300 | 1 Cisco | 6 Firepower 4110, Firepower 4120, Firepower 4140 and 3 more | 2019-10-09 | 9.0 HIGH | 7.2 HIGH |
| A vulnerability in the process of uploading new application images to Cisco FXOS on the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker using path traversal techniques to create or overwrite arbitrary files on an affected device. The vulnerability is due to insufficient validation during the application image upload process. An attacker could exploit this vulnerability by creating an application image containing malicious code and installing the image on the affected device using the CLI or web-based user interface (web UI). These actions occur prior to signature verification and could allow the attacker to create and execute arbitrary code with root privileges. Note: A missing or invalid signature in the application image will cause the upload process to fail, but does not prevent the exploit. Cisco Bug IDs: CSCvc21901. | |||||
| CVE-2018-0298 | 1 Cisco | 13 Firepower 4110, Firepower 4120, Firepower 4140 and 10 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the web UI of Cisco FXOS and Cisco UCS Fabric Interconnect Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected system. The vulnerability is due to incorrect input validation in the web UI. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet directed to the physical management interface of an affected system. A successful exploit could allow the attacker to cause the process to crash and possibly reload the device, resulting in a denial of service (DoS) condition on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61398, CSCvb86799. | |||||
| CVE-2018-0311 | 1 Cisco | 84 Firepower 4110, Firepower 4120, Firepower 4140 and 81 more | 2019-10-09 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packets when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could cause process crashes and result in a DoS condition on the device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69960, CSCve02463, CSCve04859, CSCve41530, CSCve41537, CSCve41541, CSCve41557. | |||||
| CVE-2019-1728 | 1 Cisco | 40 Firepower 4110, Firepower 4115, Firepower 4120 and 37 more | 2019-05-21 | 7.2 HIGH | 6.7 MEDIUM |
| A vulnerability in the Secure Configuration Validation functionality of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to run arbitrary commands at system boot time with the privileges of root. The vulnerability is due to a lack of proper validation of system files when the persistent configuration information is read from the file system. An attacker could exploit this vulnerability by authenticating to the device and overwriting the persistent configuration storage with malicious executable files. An exploit could allow the attacker to run arbitrary commands at system startup and those commands will run as the root user. The attacker must have valid administrative credentials for the device. | |||||