Filtered by vendor Dlink
Subscribe
Search
Total
385 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2019-14338 | 1 Dlink | 4 6600-ap, 6600-ap Firmware, Dwl-3600ap and 1 more | 2021-04-23 | 4.3 MEDIUM | 6.1 MEDIUM |
| An issue was discovered on D-Link 6600-AP and DWL-3600AP Ax 4.2.0.14 21/03/2019 devices. There is a post-authentication admin.cgi?action= XSS vulnerability on the management interface. | |||||
| CVE-2016-10179 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. There is a hardcoded WPS PIN of 28296607. | |||||
| CVE-2016-10186 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. /var/miniupnpd.conf has no deny rules. | |||||
| CVE-2017-8414 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2021-04-23 | 7.2 HIGH | 7.8 HIGH |
| An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary orthrus in /sbin folder of the device handles all the UPnP connections received by the device. It seems that the binary performs a sprintf operation at address 0x0000A3E4 with the value in the command line parameter "-f" and stores it on the stack. Since there is no length check, this results in corrupting the registers for the function sub_A098 which results in memory corruption. | |||||
| CVE-2016-10180 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. WPS PIN generation is based on srand(time(0)) seeding. | |||||
| CVE-2016-10182 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on the D-Link DWR-932B router. qmiweb allows command injection with ` characters. | |||||
| CVE-2016-10178 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on the D-Link DWR-932B router. HELODBG on port 39889 (UDP) launches the "/sbin/telnetd -l /bin/sh" command. | |||||
| CVE-2016-10183 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. qmiweb allows directory listing with ../ traversal. | |||||
| CVE-2016-10185 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. A secure_mode=no line exists in /var/miniupnpd.conf. | |||||
| CVE-2016-10181 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. qmiweb provides sensitive information for CfgType=get_homeCfg requests. | |||||
| CVE-2016-10177 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on the D-Link DWR-932B router. Undocumented TELNET and SSH services provide logins to admin with the password admin and root with the password 1234. | |||||
| CVE-2017-16765 | 1 Dlink | 2 Dwr-933, Dwr-933 Firmware | 2021-04-23 | 4.3 MEDIUM | 6.1 MEDIUM |
| XSS exists on D-Link DWR-933 1.00(WW)B17 devices via cgi-bin/gui.cgi. | |||||
| CVE-2016-10184 | 1 Dlink | 2 Dwr-932b, Dwr-932b Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on the D-Link DWR-932B router. qmiweb allows file reading with ..%2f traversal. | |||||
| CVE-2020-25758 | 1 Dlink | 20 Dsr-1000, Dsr-1000 Firmware, Dsr-1000ac and 17 more | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DSR-250 3.17 devices. Insufficient validation of configuration file checksums could allow a remote, authenticated attacker to inject arbitrary crontab entries into saved configurations before uploading. These entries are executed as root. | |||||
| CVE-2013-5945 | 1 Dlink | 16 Dsr-1000, Dsr-1000 Firmware, Dsr-1000n and 13 more | 2021-04-23 | 10.0 HIGH | 9.8 CRITICAL |
| Multiple SQL injection vulnerabilities in D-Link DSR-150 with firmware before 1.08B44; DSR-150N with firmware before 1.05B64; DSR-250 and DSR-250N with firmware before 1.08B44; and DSR-500, DSR-500N, DSR-1000, and DSR-1000N with firmware before 1.08B77 allow remote attackers to execute arbitrary SQL commands via the password to (1) the login.authenticate function in share/lua/5.1/teamf1lualib/login.lua or (2) captivePortal.lua. | |||||
| CVE-2019-6969 | 1 Dlink | 2 Dva-5592, Dva-5592 Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| The web interface of the D-Link DVA-5592 20180823 is vulnerable to an authentication bypass that allows an unauthenticated user to have access to sensitive information such as the Wi-Fi password and the phone number (if VoIP is in use). | |||||
| CVE-2019-14335 | 1 Dlink | 4 6600-ap, 6600-ap Firmware, Dwl-3600ap and 1 more | 2021-04-23 | 4.9 MEDIUM | 5.5 MEDIUM |
| An issue was discovered on D-Link 6600-AP and DWL-3600AP Ax 4.2.0.14 21/03/2019 devices. There is post-authenticated denial of service leading to the reboot of the AP via the admin.cgi?action=%s URI. | |||||
| CVE-2019-14337 | 1 Dlink | 4 6600-ap, 6600-ap Firmware, Dwl-3600ap and 1 more | 2021-04-23 | 2.1 LOW | 5.5 MEDIUM |
| An issue was discovered on D-Link 6600-AP and DWL-3600AP Ax 4.2.0.14 21/03/2019 devices. There is an ability to escape to a shell in the restricted command line interface, as demonstrated by the `/bin/sh -c wget` sequence. | |||||
| CVE-2019-6968 | 1 Dlink | 2 Dva-5592, Dva-5592 Firmware | 2021-04-23 | 4.3 MEDIUM | 6.1 MEDIUM |
| The web interface of the D-Link DVA-5592 20180823 is vulnerable to XSS because HTML form parameters are directly reflected. | |||||
| CVE-2019-14336 | 1 Dlink | 4 6600-ap, 6600-ap Firmware, Dwl-3600ap and 1 more | 2021-04-23 | 2.1 LOW | 5.5 MEDIUM |
| An issue was discovered on D-Link 6600-AP and DWL-3600AP Ax 4.2.0.14 21/03/2019 devices. There is post-authenticated dump of all of the config files through a certain admin.cgi?action= insecure HTTP request. | |||||
| CVE-2019-14334 | 1 Dlink | 6 6600-ap, 6600-ap Firmware, Dwl-3600ap and 3 more | 2021-04-23 | 2.1 LOW | 5.5 MEDIUM |
| An issue was discovered on D-Link 6600-AP, DWL-3600AP, and DWL-8610AP Ax 4.2.0.14 21/03/2019 devices. There is post-authenticated Certificate and RSA Private Key extraction through an insecure sslcert-get.cgi HTTP command. | |||||
| CVE-2019-14333 | 1 Dlink | 4 6600-ap, 6600-ap Firmware, Dwl-3600ap and 1 more | 2021-04-23 | 4.9 MEDIUM | 5.5 MEDIUM |
| An issue was discovered on D-Link 6600-AP and DWL-3600AP Ax 4.2.0.14 21/03/2019 devices. There is a pre-authenticated denial of service attack against the access point via a long action parameter to admin.cgi. | |||||
| CVE-2019-14332 | 1 Dlink | 4 6600-ap, 6600-ap Firmware, Dwl-3600ap and 1 more | 2021-04-23 | 4.6 MEDIUM | 7.8 HIGH |
| An issue was discovered on D-Link 6600-AP and DWL-3600AP Ax 4.2.0.14 21/03/2019 devices. There is use of weak ciphers for SSH such as diffie-hellman-group1-sha1. | |||||
| CVE-2020-8864 | 1 Dlink | 6 Dir-867, Dir-867 Firmware, Dir-878 and 3 more | 2021-04-23 | 8.3 HIGH | 8.8 HIGH |
| This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper handling of empty passwords. An attacker can leverage this vulnerability to execute arbitrary code on the router. Was ZDI-CAN-9471. | |||||
| CVE-2020-8863 | 1 Dlink | 6 Dir-867, Dir-867 Firmware, Dir-878 and 3 more | 2021-04-23 | 8.3 HIGH | 8.8 HIGH |
| This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper implementation of the authentication algorithm. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the router. Was ZDI-CAN-9470. | |||||
| CVE-2018-17777 | 1 Dlink | 2 Dva-5592, Dva-5592 Firmware | 2021-04-23 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DVA-5592 A1_WI_20180823 devices. If the PIN of the page "/ui/cbpc/login" is the default Parental Control PIN (0000), it is possible to bypass the login form by editing the path of the cookie "sid" generated by the page. The attacker will have access to the router control panel with administrator privileges. | |||||
| CVE-2021-30072 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered in prog.cgi on D-Link DIR-878 1.30B08 devices. Because strcat is misused, there is a stack-based buffer overflow that does not require authentication. | |||||
| CVE-2018-18007 | 1 Dlink | 2 Dsl-2770l, Dsl-2770l Firmware | 2021-04-23 | 5.0 MEDIUM | 9.8 CRITICAL |
| atbox.htm on D-Link DSL-2770L devices allows remote unauthenticated attackers to discover admin credentials. | |||||
| CVE-2020-13150 | 1 Dlink | 2 Dsl-2750u, Dsl-2750u Firmware | 2021-04-23 | 4.6 MEDIUM | 7.8 HIGH |
| D-link DSL-2750U ISL2750UEME3.V1E devices allow approximately 90 seconds of access to the control panel, after a restart, before MAC address filtering rules become active. | |||||
| CVE-2020-24577 | 1 Dlink | 2 Dsl-2888a, Dsl-2888a Firmware | 2021-04-23 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on D-Link DSL-2888A devices with firmware prior to AU_2.31_V1.1.47ae55. The One Touch application discloses sensitive information, such as the hashed admin login password and the Internet provider connection username and cleartext password, in the application's response body for a /tmp/var/passwd or /tmp/home/wan_stat URI. | |||||
| CVE-2020-27862 | 1 Dlink | 4 Dsl-2888a, Dsl-2888a Firmware, Dva-2800 and 1 more | 2021-04-23 | 5.8 MEDIUM | 8.8 HIGH |
| This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DVA-2800 and DSL-2888A routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the dhttpd service, which listens on TCP port 8008 by default. When parsing the path parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the web server. Was ZDI-CAN-10911. | |||||
| CVE-2020-27863 | 1 Dlink | 4 Dsl-2888a, Dsl-2888a Firmware, Dva-2800 and 1 more | 2021-04-23 | 3.3 LOW | 6.5 MEDIUM |
| This vulnerability allows network-adjacent attackers to disclose sensitive information on affected installations of D-Link DVA-2800 and DSL-2888A routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the dhttpd service, which listens on TCP port 8008 by default. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-10912. | |||||
| CVE-2020-12774 | 1 Dlink | 2 Dsl-7740c, Dsl-7740c Firmware | 2021-04-23 | 4.6 MEDIUM | 6.7 MEDIUM |
| D-Link DSL-7740C does not properly validate user input, which allows an authenticated LAN user to inject arbitrary command. | |||||
| CVE-2017-14948 | 1 Dlink | 12 Dir-868l, Dir-868l Firmware, Dir-880l and 9 more | 2021-04-23 | 7.5 HIGH | 9.8 CRITICAL |
| Certain D-Link products are affected by: Buffer Overflow. This affects DIR-880L 1.08B04 and DIR-895 L/R 1.13b03. The impact is: execute arbitrary code (remote). The component is: htdocs/fileaccess.cgi. The attack vector is: A crafted HTTP request handled by fileacces.cgi could allow an attacker to mount a ROP attack: if the HTTP header field CONTENT_TYPE starts with ''boundary=' followed by more than 256 characters, a buffer overflow would be triggered, potentially causing code execution. | |||||
| CVE-2019-16190 | 1 Dlink | 6 Dir-868l, Dir-868l Firmware, Dir-885l and 3 more | 2021-04-23 | 7.5 HIGH | 9.8 CRITICAL |
| SharePort Web Access on D-Link DIR-868L REVB through 2.03, DIR-885L REVA through 1.20, and DIR-895L REVA through 1.21 devices allows Authentication Bypass, as demonstrated by a direct request to folder_view.php or category_view.php. | |||||
| CVE-2019-8319 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv4Settings API function, as demonstrated by shell metacharacters in the Gateway field. | |||||
| CVE-2019-8318 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metacharacters in the SMTPServerPort field. | |||||
| CVE-2019-8317 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv6Settings API function, as demonstrated by shell metacharacters in the DestNetwork field. | |||||
| CVE-2019-8316 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWebFilterSettings API function, as demonstrated by shell metacharacters in the WebFilterURLs field. | |||||
| CVE-2019-8315 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv4FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv4AddressRangeStart field. | |||||
| CVE-2019-8313 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv6FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv6AddressRangeStart field. | |||||
| CVE-2019-8314 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetQoSSettings API function, as demonstrated by shell metacharacters in the IPAddress field. | |||||
| CVE-2019-8312 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysLogSettings API function, as demonstrated by shell metacharacters in the IPAddress field. | |||||
| CVE-2020-25786 | 1 Dlink | 12 Dir-645, Dir-645 Firmware, Dir-803 and 9 more | 2021-04-23 | 4.3 MEDIUM | 6.1 MEDIUM |
| ** UNSUPPORTED WHEN ASSIGNED ** webinc/js/info.php on D-Link DIR-816L 2.06.B09_BETA and DIR-803 1.04.B02 devices allows XSS via the HTTP Referer header. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: this is typically not exploitable because of URL encoding (except in Internet Explorer) and because a web page cannot specify that a client should make an additional HTTP request with an arbitrary Referer header. | |||||
| CVE-2019-19742 | 1 Dlink | 2 Dir-615, Dir-615 Firmware | 2021-04-23 | 3.5 LOW | 4.8 MEDIUM |
| On D-Link DIR-615 devices, the User Account Configuration page is vulnerable to blind XSS via the name field. | |||||
| CVE-2019-13563 | 1 Dlink | 2 Dir-655, Dir-655 Firmware | 2021-04-23 | 6.8 MEDIUM | 8.8 HIGH |
| D-Link DIR-655 C devices before 3.02B05 BETA03 allow CSRF for the entire management console. | |||||
| CVE-2019-17353 | 1 Dlink | 2 Dir-615, Dir-615 Firmware | 2021-04-23 | 6.4 MEDIUM | 8.2 HIGH |
| An issue discovered on D-Link DIR-615 devices with firmware version 20.05 and 20.07. wan.htm can be accessed directly without authentication, which can lead to disclosure of information about the WAN, and can also be leveraged by an attacker to modify the data fields of the page. | |||||
| CVE-2019-13481 | 1 Dlink | 2 Dir-818lw, Dir-818lw Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the MTU field to SetWanSettings. | |||||
| CVE-2019-13560 | 1 Dlink | 2 Dir-655, Dir-655 Firmware | 2021-04-23 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DIR-655 C devices before 3.02B05 BETA03 allow remote attackers to force a blank password via the apply_sec.cgi setup_wizard parameter. | |||||
| CVE-2017-8416 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2021-04-23 | 8.3 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device runs a custom daemon on UDP port 5978 which is called "dldps2121" and listens for broadcast packets sent on 255.255.255.255. This daemon handles custom D-Link UDP based protocol that allows D-Link mobile applications and desktop applications to discover D-Link devices on the local network. The binary processes the received UDP packets sent from any device in "main" function. One path in the function traverses towards a block of code that processing of packets which does an unbounded copy operation which allows to overflow the buffer. The custom protocol created by Dlink follows the following pattern: Packetlen, Type of packet; M=MAC address of device or broadcast; D=Device Type;C=base64 encoded command string;test=1111 We can see at address function starting at address 0x0000DBF8 handles the entire UDP packet and performs an insecure copy using strcpy function at address 0x0000DC88. This results in overflowing the stack pointer after 1060 characters and thus allows to control the PC register and results in code execution. The same form of communication can be initiated by any process including an attacker process on the mobile phone or the desktop and this allows a third-party application on the device to execute commands on the device without any authentication by sending just 1 UDP packet with custom base64 encoding. | |||||