Search
Total
201818 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2017-8331 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2019-06-21 | 6.5 MEDIUM | 8.8 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new port forwarding rules to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in passing commands to a "system" API in the function and thus result in command injection on the device. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_43C280in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "ip_address" is extracted at address 0x0043C2F0. The POST parameter "ipaddress" is concatenated at address 0x0043C958 and this is passed to a "system" function at address 0x00437284. This allows an attacker to provide the payload of his/her choice and finally take control of the device. | |||||
| CVE-2017-8333 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2019-06-21 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new routes to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in passing commands to a "popen" API in the function and thus result in command injection on the device. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "dest" is extracted at address 0x00420FC4. The POST parameter "dest is concatenated in a route add command and this is passed to a "popen" function at address 0x00421220. This allows an attacker to provide the payload of his/her choice and finally take control of the device. | |||||
| CVE-2017-14395 | 1 Forgerock | 2 Access Management, Openam | 2019-06-21 | 4.3 MEDIUM | 6.1 MEDIUM |
| Auth 2.0 Authorization Server of ForgeRock Access Management (OpenAM) 13.5.0-13.5.1 and Access Management (AM) 5.0.0-5.1.1 does not correctly validate redirect_uri for some invalid requests, which allows attackers to execute a script in the user's browser via reflected XSS. | |||||
| CVE-2017-14394 | 1 Forgerock | 2 Access Management, Openam | 2019-06-21 | 5.8 MEDIUM | 6.1 MEDIUM |
| OAuth 2.0 Authorization Server of ForgeRock Access Management (OpenAM) 13.5.0-13.5.1 and Access Management (AM) 5.0.0-5.1.1 does not correctly validate redirect_uri for some invalid requests, which allows attackers to perform phishing via an unvalidated redirect. | |||||
| CVE-2017-9386 | 1 Getvera | 4 Veraedge, Veraedge Firmware, Veralite and 1 more | 2019-06-21 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a script file called "get_file.sh" which allows a user to retrieve any file stored in the "cmh-ext" folder on the device. However, the "filename" parameter is not validated correctly and this allows an attacker to directory traverse outside the /cmh-ext folder and read any file on the device. It is necessary to create the folder "cmh-ext" on the device which can be executed by an attacker first in an unauthenticated fashion and then execute a directory traversal attack. | |||||
| CVE-2017-8328 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2019-06-21 | 9.3 HIGH | 8.8 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of changing the administrative password for the web management interface. It seems that the device does not implement any cross site request forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface to change a user's password. Also this is a systemic issue. | |||||
| CVE-2017-8336 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2019-06-21 | 6.5 MEDIUM | 8.8 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new routes to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in overflowing the stack set up and allow an attacker to control the $ra register stored on the stack. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST request. The POST parameter "gateway" allows to overflow the stack and control the $ra register after 1546 characters. The value from this post parameter is then copied on the stack at address 0x00421348 as shown below. This allows an attacker to provide the payload of his/her choice and finally take control of the device. | |||||
| CVE-2018-16248 | 1 B3log | 1 Solo | 2019-06-21 | 4.3 MEDIUM | 6.1 MEDIUM |
| b3log Solo 2.9.3 has XSS in the Input page under the "Publish Articles" menu with an ID of "articleTags" stored in the "tag" JSON field, which allows remote attackers to inject arbitrary Web scripts or HTML via a carefully crafted site name in an admin-authenticated HTTP request. | |||||
| CVE-2019-2019 | 1 Google | 1 Android | 2019-06-21 | 7.1 HIGH | 6.5 MEDIUM |
| In ce_t4t_data_cback of ce_t4t.cc, there is a possible out-of-bound read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-115635871 | |||||
| CVE-2018-2008 | 1 Ibm | 1 Tririga Application Platform | 2019-06-21 | 4.0 MEDIUM | 4.3 MEDIUM |
| IBM TRIRIGA Application Platform 3.5.3 and 3.6.0 could disclose sensitive information to an authenticated user that could aid in further attacks against the system. IBM X-Force ID: 155146. | |||||
| CVE-2019-1989 | 1 Google | 1 Android | 2019-06-21 | 9.3 HIGH | 8.8 HIGH |
| In ih264d_fmt_conv_420sp_to_420p of ih264d_format_conv.c, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-118399205 | |||||
| CVE-2019-1990 | 1 Google | 1 Android | 2019-06-21 | 9.3 HIGH | 8.8 HIGH |
| In ihevcd_fmt_conv_420sp_to_420p of ihevcd_fmt_conv.c, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-118453553 | |||||
| CVE-2019-2009 | 1 Google | 1 Android | 2019-06-21 | 8.3 HIGH | 8.8 HIGH |
| In l2c_lcc_proc_pdu of l2c_fcr.cc, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution over Bluetooth with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-120665616 | |||||
| CVE-2017-8334 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2019-06-21 | 6.0 MEDIUM | 8.0 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of blocking IP addresses using the web management interface. It seems that the device does not implement any cross-site scripting forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a cross-site scripting payload on the user's browser and execute any action on the device provided by the web management interface. | |||||
| CVE-2019-11129 | 1 Intel | 13 Compute Card Cd1c64gk, Compute Card Cd1iv128mk, Compute Card Cd1m3128mk and 10 more | 2019-06-20 | 4.6 MEDIUM | 6.7 MEDIUM |
| Out of bound read/write in system firmware for Intel(R) NUC Kit may allow a privileged user to potentially enable escalation of privilege, denial of service and/or information disclosure via local access. | |||||
| CVE-2017-8335 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2019-06-20 | 6.0 MEDIUM | 8.0 HIGH |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of setting name for wireless network. These values are stored by the device in NVRAM (Non-volatile RAM). It seems that the POST parameters passed in this request to set up names on the device do not have a string length check on them. This allows an attacker to send a large payload in the "mssid_1" POST parameter. The device also allows a user to view the name of the Wifi Network set by the user. While processing this request, the device calls a function named "getCfgToHTML" at address 0x004268A8 which retrieves the value set earlier by "mssid_1" parameter as SSID2 and this value then results in overflowing the stack set up for this function and allows an attacker to control $ra register value on the stack which allows an attacker to control the device by executing a payload of an attacker's choice. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST parameter "mssid_1" at address 0x0042BA00 and then sets in the NVRAM at address 0x0042C314. The value is later retrieved in the function "getCfgToHTML" at address 0x00426924 and this results in overflowing the buffer due to "strcat" function that is utilized by this function. | |||||
| CVE-2017-8329 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2019-06-20 | 4.6 MEDIUM | 6.4 MEDIUM |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of setting a name for the wireless network. These values are stored by the device in NVRAM (Non-volatile RAM). It seems that the POST parameters passed in this request to set up names on the device do not have a string length check on them. This allows an attacker to send a large payload in the "mssid_1" POST parameter. The device also allows a user to view the name of the Wifi Network set by the user. While processing this request, the device calls a function at address 0x00412CE4 (routerSummary) in the binary "webServer" located in Almond folder, which retrieves the value set earlier by "mssid_1" parameter as SSID2 and this value then results in overflowing the stack set up for this function and allows an attacker to control $ra register value on the stack which allows an attacker to control the device by executing a payload of an attacker's choice. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST parameter "mssid_1" at address 0x0042BA00 and then sets in the NVRAM at address 0x0042C314. The value is later retrieved in the function at address 0x00412EAC and this results in overflowing the buffer as the function copies the value directly on the stack. | |||||
| CVE-2018-20092 | 1 Ptc | 1 Thingworx Platform | 2019-06-20 | 5.0 MEDIUM | 7.5 HIGH |
| PTC ThingWorx Platform through 8.3.0 is vulnerable to a directory traversal attack on ZIP files via a POST request. | |||||
| CVE-2019-10998 | 1 Phoenixcontact | 4 Axc F 2152, Axc F 2152 Firmware, Axc F 2152 Starterkit and 1 more | 2019-06-20 | 4.6 MEDIUM | 6.8 MEDIUM |
| An issue was discovered on Phoenix Contact AXC F 2152 (No.2404267) before 2019.0 LTS and AXC F 2152 STARTERKIT (No.1046568) before 2019.0 LTS devices. Unlimited physical access to the PLC may lead to a manipulation of SD cards data. SD card manipulation may lead to an authentication bypass opportunity. | |||||
| CVE-2019-2010 | 1 Google | 1 Android | 2019-06-20 | 7.2 HIGH | 7.8 HIGH |
| In phNxpNciHal_process_ext_rsp of phNxpNciHal_ext.cc, there is a possible out-of-bound write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-118152591 | |||||
| CVE-2019-2011 | 1 Google | 1 Android | 2019-06-20 | 7.2 HIGH | 7.8 HIGH |
| In readNullableNativeHandleNoDup of Parcel.cpp, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-8.0 Android-8.1 Android-9Android ID: A-120084106 | |||||
| CVE-2018-9561 | 1 Google | 1 Android | 2019-06-20 | 7.1 HIGH | 6.5 MEDIUM |
| In llcp_util_parse_connect of llcp_util.cc, there is a possible out-of-bound read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-111660010 | |||||
| CVE-2019-2012 | 1 Google | 1 Android | 2019-06-20 | 9.3 HIGH | 8.8 HIGH |
| In rw_t3t_act_handle_fmt_rsp of rw_t3t.cc, there is a possible out-of-bound write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-120497437 | |||||
| CVE-2019-2014 | 1 Google | 1 Android | 2019-06-20 | 9.3 HIGH | 8.8 HIGH |
| In rw_t3t_handle_get_sc_poll_rsp of rw_t3t.cc, there is a possible out-of-bound write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-120499324 | |||||
| CVE-2019-2015 | 1 Google | 1 Android | 2019-06-20 | 9.3 HIGH | 8.8 HIGH |
| In rw_t3t_act_handle_check_rsp of rw_t3t.cc, there is a possible out-of-bound write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-120503926 | |||||
| CVE-2019-2013 | 1 Google | 1 Android | 2019-06-20 | 9.3 HIGH | 8.8 HIGH |
| In rw_t3t_act_handle_sro_rsp of rw_t3t.cc, there is a possible out-of-bound write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-120497583 | |||||
| CVE-2017-10721 | 1 Ishekar | 2 Endoscope Camera, Endoscope Camera Firmware | 2019-06-20 | 4.0 MEDIUM | 6.5 MEDIUM |
| Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that the device has Telnet functionality enabled by default. This device acts as an Endoscope camera that allows its users to use it in various industrial systems and settings, car garages, and also in some cases in the medical clinics to get access to areas that are difficult for a human being to reach. Any breach of this system can allow an attacker to get access to video feed and pictures viewed by that user and might allow them to get a foot hold in air gapped networks especially in case of nation critical infrastructure/industries. | |||||
| CVE-2018-9563 | 1 Google | 1 Android | 2019-06-20 | 7.1 HIGH | 6.5 MEDIUM |
| In llcp_util_parse_cc of llcp_util.cc, there is a possible out-of-bound read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-114237888 | |||||
| CVE-2019-2021 | 1 Google | 1 Android | 2019-06-20 | 7.1 HIGH | 6.5 MEDIUM |
| In rw_t3t_act_handle_ndef_detect_rsp of rw_t3t.cc, there is a possible out-of-bound read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-120428041 | |||||
| CVE-2018-9564 | 1 Google | 1 Android | 2019-06-20 | 7.1 HIGH | 6.5 MEDIUM |
| In llcp_util_parse_link_params of llcp_util.cc, there is a possible out-of-bound read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-114238578 | |||||
| CVE-2017-7653 | 2 Debian, Eclipse | 2 Debian Linux, Mosquitto | 2019-06-20 | 3.5 LOW | 5.3 MEDIUM |
| The Eclipse Mosquitto broker up to version 1.4.15 does not reject strings that are not valid UTF-8. A malicious client could cause other clients that do reject invalid UTF-8 strings to disconnect themselves from the broker by sending a topic string which is not valid UTF-8, and so cause a denial of service for the clients. | |||||
| CVE-2019-2020 | 1 Google | 1 Android | 2019-06-20 | 7.1 HIGH | 6.5 MEDIUM |
| In llcp_dlc_proc_rr_rnr_pdu of llcp_dlc.cc, there is a possible out-of-bound read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-116788646 | |||||
| CVE-2019-2003 | 1 Google | 1 Android | 2019-06-20 | 9.3 HIGH | 8.8 HIGH |
| In addLinks of Linkify.java, there is a possible phishing vector due to an unusual root cause. This could lead to remote code execution or misdirection of clicks with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-116321860 | |||||
| CVE-2017-10723 | 1 Ishekar | 2 Endoscope Camera, Endoscope Camera Firmware | 2019-06-20 | 6.5 MEDIUM | 8.8 HIGH |
| Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that an attacker connected to the device Wi-Fi SSID can exploit a memory corruption issue and execute remote code on the device. This device acts as an Endoscope camera that allows its users to use it in various industrial systems and settings, car garages, and also in some cases in the medical clinics to get access to areas that are difficult for a human being to reach. Any breach of this system can allow an attacker to get access to video feed and pictures viewed by that user and might allow them to get a foot hold in air gapped networks especially in case of nation critical infrastructure/industries. The firmware contains binary uvc_stream that is the UDP daemon which is responsible for handling all the UDP requests that the device receives. The client application sends a UDP request to change the Wi-Fi name which contains the following format: "SETCMD0001+0001+[2 byte length of wifiname]+[Wifiname]. This request is handled by "control_Dev_thread" function which at address "0x00409AE0" compares the incoming request and determines if the 10th byte is 01 and if it is then it redirects to 0x0040A74C which calls the function "setwifiname". The function "setwifiname" uses a memcpy function but uses the length of the payload obtained by using strlen function as the third parameter which is the number of bytes to copy and this allows an attacker to overflow the function and control the $PC value. | |||||
| CVE-2018-16247 | 1 Yzmcms | 1 Yzmcms | 2019-06-20 | 3.5 LOW | 5.4 MEDIUM |
| YzmCMS 5.1 has XSS via the admin/system_manage/user_config_add.html title parameter. | |||||
| CVE-2017-10722 | 1 Ishekar | 2 Endoscope Camera, Endoscope Camera Firmware | 2019-06-20 | 4.6 MEDIUM | 7.8 HIGH |
| Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that the desktop application used to connect to the device suffers from a stack overflow if more than 26 characters are passed to it as the Wi-Fi password. This application is installed on the device and an attacker who can provide the right payload can execute code on the user's system directly. Any breach of this system can allow an attacker to get access to all the data that the user has access too. The application uses a dynamic link library(DLL) called "avilib.dll" which is used by the application to send binary packets to the device that allow to control the device. One such action that the DLL provides is change password in the function "sendchangepass" which allows a user to change the Wi-Fi password on the device. This function calls a sub function "sub_75876EA0" at address 0x7587857C. The function determines which action to execute based on the parameters sent to it. The "sendchangepass" passes the datastring as the second argument which is the password we enter in the textbox and integer 2 as first argument. The rest of the 3 arguments are set to 0. The function "sub_75876EA0" at address 0x75876F19 uses the first argument received and to determine which block to jump to. Since the argument passed is 2, it jumps to 0x7587718C and proceeds from there to address 0x758771C2 which calculates the length of the data string passed as the first parameter.This length and the first argument are then passed to the address 0x7587726F which calls a memmove function which uses a stack address as the destination where the password typed by us is passed as the source and length calculated above is passed as the number of bytes to copy which leads to a stack overflow. | |||||
| CVE-2017-10720 | 1 Ishekar | 2 Endoscope Camera, Endoscope Camera Firmware | 2019-06-20 | 4.6 MEDIUM | 7.8 HIGH |
| Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that the desktop application used to connect to the device suffers from a stack overflow if more than 26 characters are passed to it as the Wi-Fi name. This application is installed on the device and an attacker who can provide the right payload can execute code on the user's system directly. Any breach of this system can allow an attacker to get access to all the data that the user has access too. The application uses a dynamic link library(DLL) called "avilib.dll" which is used by the application to send binary packets to the device that allow to control the device. One such action that the DLL provides is change password in the function "sendchangename" which allows a user to change the Wi-Fi name on the device. This function calls a sub function "sub_75876EA0" at address 0x758784F8. The function determines which action to execute based on the parameters sent to it. The "sendchangename" passes the datastring as the second argument which is the name we enter in the textbox and integer 1 as first argument. The rest of the 3 arguments are set to 0. The function "sub_75876EA0" at address 0x75876F19 uses the first argument received and to determine which block to jump to. Since the argument passed is 1, it jumps to 0x75876F20 and proceeds from there to address 0x75876F56 which calculates the length of the data string passed as the first parameter. This length and the first argument are then passed to the address 0x75877001 which calls the memmove function which uses a stack address as the destination where the password typed by us is passed as the source and length calculated above is passed as the number of bytes to copy which leads to a stack overflow. | |||||
| CVE-2017-10724 | 1 Ishekar | 2 Endoscope Camera, Endoscope Camera Firmware | 2019-06-20 | 6.5 MEDIUM | 8.8 HIGH |
| Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that an attacker connected to the device Wi-Fi SSID can exploit a memory corruption issue and execute remote code on the device. This device acts as an Endoscope camera that allows its users to use it in various industrial systems and settings, car garages, and also in some cases in the medical clinics to get access to areas that are difficult for a human being to reach. Any breach of this system can allow an attacker to get access to video feed and pictures viewed by that user and might allow them to get a foot hold in air gapped networks especially in case of nation critical infrastructure/industries. The firmware contains binary uvc_stream that is the UDP daemon which is responsible for handling all the UDP requests that the device receives. The client application sends a UDP request to change the Wi-Fi name which contains the following format: "SETCMD0001+0002+[2 byte length of wifipassword]+[Wifipassword]. This request is handled by "control_Dev_thread" function which at address "0x00409AE4" compares the incoming request and determines if the 10th byte is 02 and if it is then it redirects to 0x0040A7D8, which calls the function "setwifipassword". The function "setwifipassword" uses a memcpy function but uses the length of the payload obtained by using strlen function as the third parameter which is the number of bytes to copy and this allows an attacker to overflow the function and control the $PC value. | |||||
| CVE-2019-2022 | 1 Google | 1 Android | 2019-06-20 | 7.1 HIGH | 6.5 MEDIUM |
| In rw_t3t_act_handle_fmt_rsp and rw_t3t_act_handle_sro_rsp of rw_t3t.cc, there is a possible out-of-bound read due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-120506143 | |||||
| CVE-2018-15890 | 1 Ethereum | 1 Ethereumj | 2019-06-20 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered in EthereumJ 1.8.2. There is Unsafe Deserialization in ois.readObject in mine/Ethash.java and decoder.readObject in crypto/ECKey.java. When a node syncs and mines a new block, arbitrary OS commands can be run on the server. | |||||
| CVE-2019-2017 | 1 Google | 1 Android | 2019-06-20 | 7.2 HIGH | 7.8 HIGH |
| In rw_t2t_handle_tlv_detect_rsp of rw_t2t_ndef.cc, there is a possible out-of-bound write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-7.0 Android-7.1.1 Android-7.1.2 Android-8.0 Android-8.1 Android-9Android ID: A-121035711 | |||||
| CVE-2017-10719 | 1 Ishekar | 2 Endoscope Camera, Endoscope Camera Firmware | 2019-06-20 | 4.0 MEDIUM | 6.5 MEDIUM |
| Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that the device has default Wi-Fi credentials that are exactly the same for every device. This device acts as an Endoscope camera that allows its users to use it in various industrial systems and settings, car garages, and also in some cases in the medical clinics to get access to areas that are difficult for a human being to reach. Any breach of this system can allow an attacker to get access to video feed and pictures viewed by that user and might allow them to get a foot hold in air gapped networks especially in case of nation critical infrastructure/industries. | |||||
| CVE-2017-10718 | 1 Ishekar | 2 Endoscope Camera, Endoscope Camera Firmware | 2019-06-20 | 4.0 MEDIUM | 6.5 MEDIUM |
| Recently it was discovered as a part of the research on IoT devices in the most recent firmware for Shekar Endoscope that any malicious user connecting to the device can change the default SSID and password thereby denying the owner an access to his/her own device. This device acts as an Endoscope camera that allows its users to use it in various industrial systems and settings, car garages, and also in some cases in the medical clinics to get access to areas that are difficult for a human being to reach. Any breach of this system can allow an attacker to get access to video feed and pictures viewed by that user and might allow them to get a foot hold in air gapped networks especially in case of nation critical infrastructure/industries. | |||||
| CVE-2018-10239 | 1 Infoblox | 1 Nios | 2019-06-20 | 7.2 HIGH | 6.7 MEDIUM |
| A privilege escalation vulnerability in the "support access" feature on Infoblox NIOS 6.8 through 8.4.1 could allow a locally authenticated administrator to temporarily gain additional privileges on an affected device and perform actions within the super user scope. The vulnerability is due to a weakness in the "support access" password generation algorithm. A locally authenticated administrative user may be able to exploit this vulnerability if the "support access" feature is enabled, they know the support access code for the current session, and they know the algorithm to generate the support access password from the support access code. "Support access" is disabled by default. When enabled, the access will be automatically disabled (and support access code will expire) after the 24 hours. | |||||
| CVE-2018-17388 | 1 Ranksol | 1 Twilio Web To Fax Machine System | 2019-06-20 | 7.5 HIGH | 9.8 CRITICAL |
| SQL Injection exists in Twilio WEB To Fax Machine System 1.0 via the email or password parameter to login_check.php, or the id parameter to add_email.php or edit_content.php. | |||||
| CVE-2019-0170 | 1 Intel | 1 Converged Security Management Engine Firmware | 2019-06-20 | 4.6 MEDIUM | 6.7 MEDIUM |
| Buffer overflow in subsystem in Intel(R) DAL before version 12.0.35 may allow a privileged user to potentially enable escalation of privilege via local access. | |||||
| CVE-2017-9390 | 1 Getvera | 4 Veraedge, Veraedge Firmware, Veralite and 1 more | 2019-06-20 | 4.3 MEDIUM | 6.1 MEDIUM |
| An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a shell script called connect.sh which is supposed to return a specific cookie for the user when the user is authenticated to https://home.getvera.com. One of the parameters retrieved by this script is "RedirectURL". However, the application lacks strict input validation of this parameter and this allows an attacker to execute the client-side code on this application. | |||||
| CVE-2019-10257 | 1 Zucchetti | 1 Hr Portal | 2019-06-20 | 5.0 MEDIUM | 7.5 HIGH |
| Zucchetti HR Portal through 2019-03-15 allows Directory Traversal. Unauthenticated users can escape outside of the restricted location (dot-dot-slash notation) to access files or directories that are elsewhere on the system. Through this vulnerability it is possible to read the application's java sources from /WEB-INF/classes/*.class | |||||
| CVE-2017-9382 | 1 Getvera | 4 Veraedge, Veraedge Firmware, Veralite and 1 more | 2019-06-20 | 4.0 MEDIUM | 6.5 MEDIUM |
| An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "file" as one of the service actions for a normal user to read a file that is stored under the /etc/cmh-lu folder. It retrieves the value from the "parameters" query string variable and then passes it to an internal function "FileUtils::ReadFileIntoBuffer" which is a library function that does not perform any sanitization on the value submitted and this allows an attacker to use directory traversal characters "../" and read files from other folders within the device. | |||||
| CVE-2017-9385 | 1 Getvera | 4 Veraedge, Veraedge Firmware, Veralite and 1 more | 2019-06-20 | 5.0 MEDIUM | 9.8 CRITICAL |
| An issue was discovered on Vera Veralite 1.7.481 devices. The device has an additional OpenWRT interface in addition to the standard web interface which allows the highest privileges a user can obtain on the device. This web interface uses root as the username and the password in the /etc/cmh/cmh.conf file which can be extracted by an attacker using a directory traversal attack, and then log in to the device with the highest privileges. | |||||