Filtered by vendor D-link
Subscribe
Search
Total
255 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2019-9124 | 1 D-link | 2 Dir-878, Dir-878 Firmware | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-878 1.12B01 devices. At the /HNAP1 URI, an attacker can log in with a blank password. | |||||
| CVE-2019-13263 | 1 D-link | 2 Dir-825\/ac G1, Dir-825\/ac G1 Firmware | 2020-08-24 | 5.8 MEDIUM | 8.8 HIGH |
| D-link DIR-825AC G1 devices have Insufficient Compartmentalization between a host network and a guest network that are established by the same device. A DHCP Request is sent to the router with a certain Transaction ID field. Following the DHCP protocol, the router responds with an ACK or NAK message. Studying the NAK case revealed that the router erroneously sends the NAK to both Host and Guest networks with the same Transaction ID as found in the DHCP Request. This allows encoding of data to be sent cross-router into the 32-bit Transaction ID field. | |||||
| CVE-2019-19225 | 1 D-link | 2 Dsl-2680, Dsl-2680 Firmware | 2020-08-24 | 5.0 MEDIUM | 7.5 HIGH |
| A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to change DNS servers without being authenticated on the admin interface by submitting a crafted Forms/dns_1 POST request. | |||||
| CVE-2019-9126 | 1 D-link | 2 Dir-825 Rev.b, Dir-825 Rev.b Firmware | 2020-08-24 | 5.0 MEDIUM | 7.5 HIGH |
| An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. There is an information disclosure vulnerability via requests for the router_info.xml document. This will reveal the PIN code, MAC address, routing table, firmware version, update time, QOS information, LAN information, and WLAN information of the device. | |||||
| CVE-2020-15633 | 1 D-link | 6 Dir-867, Dir-867 Firmware, Dir-878 and 3 more | 2020-07-28 | 5.8 MEDIUM | 8.8 HIGH |
| This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.20B10_BETA. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP requests. The issue results from incorrect string matching logic when accessing protected pages. An attacker can leverage this vulnerability to escalate privileges and execute code in the context of the router. Was ZDI-CAN-10835. | |||||
| CVE-2020-15893 | 1 D-link | 2 Dir-816l, Dir-816l Firmware | 2020-07-24 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-816L devices 2.x before 1.10b04Beta02. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet. | |||||
| CVE-2020-15895 | 1 D-link | 2 Dir-816l, Dir-816l Firmware | 2020-07-24 | 4.3 MEDIUM | 6.1 MEDIUM |
| An XSS issue was discovered on D-Link DIR-816L devices 2.x before 1.10b04Beta02. In the file webinc/js/info.php, no output filtration is applied to the RESULT parameter, before it's printed on the webpage. | |||||
| CVE-2019-20499 | 1 D-link | 2 Dwl-2600ap, Dwl-2600ap Firmware | 2020-03-28 | 7.2 HIGH | 7.8 HIGH |
| D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Restore Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_restore configRestore or configServerip parameter. | |||||
| CVE-2019-20501 | 1 D-link | 2 Dwl-2600ap, Dwl-2600ap Firmware | 2020-03-06 | 7.2 HIGH | 7.8 HIGH |
| D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Upgrade Firmware functionality in the Web interface, using shell metacharacters in the admin.cgi?action=upgrade firmwareRestore or firmwareServerip parameter. | |||||
| CVE-2019-20500 | 1 D-link | 2 Dwl-2600ap, Dwl-2600ap Firmware | 2020-03-06 | 7.2 HIGH | 7.8 HIGH |
| D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Save Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_save configBackup or downloadServerip parameter. | |||||
| CVE-2012-6614 | 1 D-link | 2 Dsr-250n, Dsr-250n Firmware | 2020-03-05 | 9.0 HIGH | 7.2 HIGH |
| D-Link DSR-250N devices before 1.08B31 allow remote authenticated users to obtain "persistent root access" via the BusyBox CLI, as demonstrated by overwriting the super user password. | |||||
| CVE-2019-19222 | 1 D-link | 2 Dsl-2680, Dsl-2680 Firmware | 2020-03-05 | 3.5 LOW | 5.4 MEDIUM |
| A Stored XSS issue in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an authenticated attacker to inject arbitrary JavaScript code into the info.html administration page by sending a crafted Forms/wireless_autonetwork_1 POST request. | |||||
| CVE-2019-19223 | 1 D-link | 2 Dsl-2680, Dsl-2680 Firmware | 2020-03-05 | 7.8 HIGH | 7.5 HIGH |
| A Broken Access Control vulnerability in the D-Link DSL-2680 web administration interface (Firmware EU_1.03) allows an attacker to reboot the router by submitting a reboot.html GET request without being authenticated on the admin interface. | |||||
| CVE-2020-9535 | 1 D-link | 2 Dir-615jx10, Dir-615jx10 Firmware | 2020-03-04 | 6.5 MEDIUM | 8.8 HIGH |
| fmwlan.c on D-Link DIR-615Jx10 devices has a stack-based buffer overflow via the formWlanSetup_Wizard webpage parameter when f_radius_ip1 is malformed. | |||||
| CVE-2020-9534 | 1 D-link | 2 Dir-615jx10, Dir-615jx10 Firmware | 2020-03-03 | 6.5 MEDIUM | 8.8 HIGH |
| fmwlan.c on D-Link DIR-615Jx10 devices has a stack-based buffer overflow via the formWlanSetup webpage parameter when f_radius_ip1 is malformed. | |||||
| CVE-2020-6841 | 1 D-link | 2 Dch-m225, Dch-m225 Firmware | 2020-02-25 | 10.0 HIGH | 9.8 CRITICAL |
| D-Link DCH-M225 1.05b01 and earlier devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the spotifyConnect.php userName parameter. | |||||
| CVE-2020-6842 | 1 D-link | 2 Dch-m225, Dch-m225 Firmware | 2020-02-25 | 9.0 HIGH | 7.2 HIGH |
| D-Link DCH-M225 1.05b01 and earlier devices allow remote authenticated admins to execute arbitrary OS commands via shell metacharacters in the media renderer name. | |||||
| CVE-2013-7051 | 1 D-link | 2 Dir-100, Dir-100 Firmware | 2020-02-04 | 6.8 MEDIUM | 8.8 HIGH |
| D-Link DIR-100 4.03B07: cli.cgi security bypass due to failure to check authentication parameters | |||||
| CVE-2013-7052 | 1 D-link | 2 Dir-100, Dir-100 Firmware | 2020-02-04 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DIR-100 4.03B07: security bypass via an error in the cliget.cgi script | |||||
| CVE-2013-7055 | 1 D-link | 2 Dir-100, Dir-100 Firmware | 2020-02-04 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DIR-100 4.03B07 has PPTP and poe information disclosure | |||||
| CVE-2013-7053 | 1 D-link | 2 Dir-100, Dir-100 Firmware | 2020-02-04 | 6.8 MEDIUM | 8.8 HIGH |
| D-Link DIR-100 4.03B07: cli.cgi CSRF | |||||
| CVE-2013-7054 | 1 D-link | 2 Dir-100, Dir-100 Firmware | 2020-02-04 | 4.3 MEDIUM | 6.1 MEDIUM |
| D-Link DIR-100 4.03B07: cli.cgi XSS | |||||
| CVE-2013-6811 | 1 D-link | 2 Dsl6740u, Dsl6740u Firmware | 2019-12-04 | 6.8 MEDIUM | 8.8 HIGH |
| Multiple cross-site request forgery (CSRF) vulnerabilities in the D-Link DSL-6740U gateway (Rev. H1) allow remote attackers to hijack the authentication of administrators for requests that change administrator credentials or enable remote management services to (1) Custom Services in Port Forwarding, (2) Port Triggering Entries, (3) URL Filters in Parental Control, (4) Print Server settings, (5) QoS Queue Setup, or (6) QoS Classification Entries. | |||||
| CVE-2013-4855 | 1 D-link | 2 Dir-865l, Dir-865l Firmware | 2019-10-29 | 7.9 HIGH | 8.8 HIGH |
| D-Link DIR-865L has SMB Symlink Traversal due to misconfiguration in the SMB service allowing symbolic links to be created to locations outside of the Samba share. | |||||
| CVE-2013-4856 | 1 D-link | 2 Dir-865l, Dir-865l Firmware | 2019-10-29 | 2.9 LOW | 6.5 MEDIUM |
| D-Link DIR-865L has Information Disclosure. | |||||
| CVE-2013-4857 | 1 D-link | 2 Dir-865l, Dir-865l Firmware | 2019-10-28 | 7.5 HIGH | 9.8 CRITICAL |
| D-Link DIR-865L has PHP File Inclusion in the router xml file. | |||||
| CVE-2017-3192 | 1 D-link | 4 Dir-130, Dir-130 Firmware, Dir-330 and 1 more | 2019-10-09 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 do not sufficiently protect administrator credentials. The tools_admin.asp page discloses the administrator password in base64 encoding in the returned web page. A remote attacker with access to this page (potentially through a authentication bypass such as CVE-2017-3191) may obtain administrator credentials for the device. | |||||
| CVE-2017-3191 | 1 D-link | 4 Dir-130, Dir-130 Firmware, Dir-330 and 1 more | 2019-10-09 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 are vulnerable to authentication bypass of the remote login page. A remote attacker that can access the remote management login page can manipulate the POST request in such a manner as to access some administrator-only pages such as tools_admin.asp without credentials. | |||||
| CVE-2017-3193 | 1 D-link | 2 Dir-850l, Dir-850l Firmware | 2019-10-09 | 8.3 HIGH | 8.8 HIGH |
| Multiple D-Link devices including the DIR-850L firmware versions 1.14B07 and 2.07.B05 contain a stack-based buffer overflow vulnerability in the web administration interface HNAP service. | |||||
| CVE-2017-14418 | 1 D-link | 2 Dir-850l, Dir-850l Firmware | 2019-10-03 | 4.3 MEDIUM | 8.1 HIGH |
| The D-Link NPAPI extension, as used in conjunction with D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices, sends the cleartext admin password over the Internet as part of interaction with mydlink Cloud Services. | |||||
| CVE-2018-17064 | 1 D-link | 2 Dir-816 A2, Dir-816 A2 Firmware | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/sylogapply route. This could lead to command injection via the syslogIp parameter after /goform/clearlog is invoked. | |||||
| CVE-2017-14423 | 1 D-link | 2 Dir-850l, Dir-850l Firmware | 2019-10-03 | 5.0 MEDIUM | 7.5 HIGH |
| htdocs/parentalcontrols/bind.php on D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) devices does not prevent unauthenticated nonce-guessing attacks, which makes it easier for remote attackers to change the DNS configuration via a series of requests. | |||||
| CVE-2018-17066 | 1 D-link | 2 Dir-816 A2, Dir-816 A2 Firmware | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/form2systime.cgi route. This could lead to command injection via shell metacharacters in the datetime parameter. | |||||
| CVE-2017-14417 | 1 D-link | 2 Dir-850l, Dir-850l Firmware | 2019-10-03 | 7.5 HIGH | 9.8 CRITICAL |
| register_send.php on D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices does not require authentication, which can result in unintended enrollment in mydlink Cloud Services. | |||||
| CVE-2018-17068 | 1 D-link | 2 Dir-816 A2, Dir-816 A2 Firmware | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/Diagnosis route. This could lead to command injection via shell metacharacters in the sendNum parameter. | |||||
| CVE-2018-19987 | 1 D-link | 12 Dir-818lw, Dir-818lw Firmware, Dir-822 and 9 more | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| D-Link DIR-822 Rev.B 202KRb06, DIR-822 Rev.C 3.10B06, DIR-860L Rev.B 2.03.B03, DIR-868L Rev.B 2.05B02, DIR-880L Rev.A 1.20B01_01_i3se_BETA, and DIR-890L Rev.A 1.21B02_BETA devices mishandle IsAccessPoint in /HNAP1/SetAccessPointMode. In the SetAccessPointMode.php source code, the IsAccessPoint parameter is saved in the ShellPath script file without any regex checking. After the script file is executed, the command injection occurs. A vulnerable /HNAP1/SetAccessPointMode XML message could have shell metacharacters in the IsAccessPoint element such as the `telnetd` string. | |||||
| CVE-2018-19988 | 1 D-link | 2 Dir-868l, Dir-868l Firmware | 2019-10-03 | 7.5 HIGH | 9.8 CRITICAL |
| In the /HNAP1/SetClientInfoDemo message, the AudioMute and AudioEnable parameters are vulnerable, and the vulnerabilities affect D-Link DIR-868L Rev.B 2.05B02 devices. In the SetClientInfoDemo.php source code, the AudioMute and AudioEnble parameters are saved in the ShellPath script file without any regex checking. After the script file is executed, the command injection occurs. It needs to bypass the wget command option with a single quote. A vulnerable /HNAP1/SetClientInfoDemo XML message could have single quotes and backquotes in the AudioMute or AudioEnable element, such as the '`telnetd`' string. | |||||
| CVE-2018-12103 | 1 D-link | 6 Dir-885\/r, Dir-885l\/r Firmware, Dir-890l and 3 more | 2019-10-03 | 3.3 LOW | 6.5 MEDIUM |
| An issue was discovered on D-Link DIR-890L with firmware 1.21B02beta01 and earlier, DIR-885L/R with firmware 1.21B03beta01 and earlier, and DIR-895L/R with firmware 1.21B04beta04 and earlier devices (all hardware revisions). Due to the predictability of the /docs/captcha_(number).jpeg URI, being local to the network, but unauthenticated to the administrator's panel, an attacker can disclose the CAPTCHAs used by the access point and can elect to load the CAPTCHA of their choosing, leading to unauthorized login attempts to the access point. | |||||
| CVE-2018-10823 | 1 D-link | 8 Dwr-111, Dwr-111 Firmware, Dwr-116 and 5 more | 2019-10-03 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DWR-116 through 1.06, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. An authenticated attacker may execute arbitrary code by injecting the shell command into the chkisg.htm page Sip parameter. This allows for full control over the device internals. | |||||
| CVE-2018-12710 | 1 D-link | 2 Dir-601, Dir-601 Firmware | 2019-10-03 | 2.7 LOW | 8.0 HIGH |
| An issue was discovered on D-Link DIR-601 2.02NA devices. Being local to the network and having only "User" account (which is a low privilege account) access, an attacker can intercept the response from a POST request to obtain "Admin" rights due to the admin password being displayed in XML. | |||||
| CVE-2018-17786 | 1 D-link | 2 Dir-823g, Dir-823g Firmware | 2019-10-03 | 7.5 HIGH | 9.8 CRITICAL |
| On D-Link DIR-823G devices, ExportSettings.sh, upload_settings.cgi, GetDownLoadSyslog.sh, and upload_firmware.cgi do not require authentication, which allows remote attackers to execute arbitrary code. | |||||
| CVE-2018-10431 | 1 D-link | 2 Dir-615, Dir-615 Firmware | 2019-10-03 | 6.5 MEDIUM | 7.2 HIGH |
| D-Link DIR-615 2.5.17 devices allow Remote Code Execution via shell metacharacters in the Host field of the System / Traceroute screen. | |||||
| CVE-2018-17063 | 1 D-link | 2 Dir-816 A2, Dir-816 A2 Firmware | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/NTPSyncWithHost route. This could lead to command injection via shell metacharacters. | |||||
| CVE-2018-17787 | 1 D-link | 2 Dir-823g, Dir-823g Firmware | 2019-10-03 | 7.5 HIGH | 9.8 CRITICAL |
| On D-Link DIR-823G devices, the GoAhead configuration allows /HNAP1 Command Injection via shell metacharacters in the POST data, because this data is sent directly to the "system" library function. | |||||
| CVE-2018-20389 | 1 D-link | 4 Dcm-604, Dcm-604 Firmware, Dcm-704 and 1 more | 2019-10-03 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DCM-604 DCM604_C1_ViaCabo_1.04_20130606 and DCM-704 EU_DCM-704_1.10 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. | |||||
| CVE-2018-19986 | 1 D-link | 4 Dir-818lw, Dir-818lw Firmware, Dir-822 and 1 more | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| In the /HNAP1/SetRouterSettings message, the RemotePort parameter is vulnerable, and the vulnerability affects D-Link DIR-818LW Rev.A 2.05.B03 and DIR-822 B1 202KRb06 devices. In the SetRouterSettings.php source code, the RemotePort parameter is saved in the $path_inf_wan1."/web" internal configuration memory without any regex checking. And in the IPTWAN_build_command function of the iptwan.php source code, the data in $path_inf_wan1."/web" is used with the iptables command without any regex checking. A vulnerable /HNAP1/SetRouterSettings XML message could have shell metacharacters in the RemotePort element such as the `telnetd` string. | |||||
| CVE-2018-19990 | 1 D-link | 2 Dir-822, Dir-822 Firmware | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| In the /HNAP1/SetWiFiVerifyAlpha message, the WPSPIN parameter is vulnerable, and the vulnerability affects D-Link DIR-822 B1 202KRb06 devices. In the SetWiFiVerifyAlpha.php source code, the WPSPIN parameter is saved in the $rphyinf1."/media/wps/enrollee/pin" and $rphyinf2."/media/wps/enrollee/pin" and $rphyinf3."/media/wps/enrollee/pin" internal configuration memory without any regex checking. And in the do_wps function of the wps.php source code, the data in $rphyinf3."/media/wps/enrollee/pin" is used with the wpatalk command without any regex checking. A vulnerable /HNAP1/SetWiFiVerifyAlpha XML message could have shell metacharacters in the WPSPIN element such as the `telnetd` string. | |||||
| CVE-2018-14081 | 1 D-link | 4 Dir-809, Dir-809 A1 Firmware, Dir-809 A2 Firmware and 1 more | 2019-10-03 | 5.0 MEDIUM | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-809 A1 through 1.09, A2 through 1.11, and Guest Zone through 1.09 devices. Device passwords, such as the admin password and the WPA key, are stored in cleartext. | |||||
| CVE-2017-17020 | 1 D-link | 6 Dcs-5009, Dcs-5009 Firmware, Dcs-5010 and 3 more | 2019-10-03 | 6.5 MEDIUM | 8.8 HIGH |
| On D-Link DCS-5009 devices with firmware 1.08.11 and earlier, DCS-5010 devices with firmware 1.14.09 and earlier, and DCS-5020L devices with firmware before 1.15.01, command injection in alphapd (binary responsible for running the camera's web server) allows remote authenticated attackers to execute code through sanitized /setSystemAdmin user input in the AdminID field being passed directly to a call to system. | |||||
| CVE-2018-10967 | 1 D-link | 4 Dir-550a, Dir-550a Firmware, Dir-604m and 1 more | 2019-10-03 | 9.0 HIGH | 8.8 HIGH |
| On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can forge an HTTP request to inject operating system commands that can be executed on the device with higher privileges, aka remote code execution. | |||||