Search
Total
1052 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-1148 | 1 Cisco | 9 Application Extension Platform, Rv110w, Rv110w Firmware and 6 more | 2021-01-15 | 9.0 HIGH | 7.2 HIGH |
| Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities. | |||||
| CVE-2021-1147 | 1 Cisco | 9 Application Extension Platform, Rv110w, Rv110w Firmware and 6 more | 2021-01-15 | 9.0 HIGH | 7.2 HIGH |
| Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device. Cisco has not released software updates that address these vulnerabilities. | |||||
| CVE-2020-2508 | 1 Qnap | 2 Qts, Quts Hero | 2021-01-14 | 6.5 MEDIUM | 7.2 HIGH |
| A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions: QTS 4.5.1.1456 build 20201015 (and later) QuTS hero h4.5.1.1472 build 20201031 (and later) | |||||
| CVE-2020-17503 | 1 Barco | 5 Transform N, Transform Ndn-210 Lite, Transform Ndn-210 Pro and 2 more | 2021-01-14 | 6.5 MEDIUM | 7.2 HIGH |
| The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameter "locking" is not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards. | |||||
| CVE-2020-17504 | 1 Barco | 5 Transform N, Transform Ndn-210 Lite, Transform Ndn-210 Pro and 2 more | 2021-01-14 | 6.5 MEDIUM | 7.2 HIGH |
| The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users to the administration panel to perform authenticated remote code execution. An issue exists in ngpsystemcmd.php in which the http parameters "x_modules" and "y_modules" are not properly handled. The NDN-210 is part of Barco TransForm N solution and this vulnerability is patched from TransForm N version 3.8 onwards. | |||||
| CVE-2020-17502 | 1 Barco | 5 Transform N, Transform Ndn-210 Lite, Transform Ndn-210 Pro and 2 more | 2021-01-13 | 6.5 MEDIUM | 7.2 HIGH |
| Barco TransForm N before 3.8 allows Command Injection (issue 2 of 4). The NDN-210 has a web administration panel which is made available over https. There is a command injection issue that will allow authenticated users of the administration panel to perform authenticated remote code execution. An issue exists in split_card_cmd.php in which the http parameters xmodules, ymodules and savelocking are not properly handled. The NDN-210 is part of Barco TransForm N solution and includes the patch from TransForm N version 3.8 onwards. | |||||
| CVE-2018-19418 | 2 Foxitsoftware, Microsoft | 2 Pdf Activex, Windows | 2021-01-13 | 9.3 HIGH | 7.8 HIGH |
| Foxit PDF ActiveX before 5.5.1 allows remote code execution via command injection because of the lack of a security permission control. | |||||
| CVE-2020-17500 | 1 Barco | 5 Transform N, Transform Ndn-210 Lite, Transform Ndn-210 Pro and 2 more | 2021-01-13 | 7.5 HIGH | 9.8 CRITICAL |
| Barco TransForm NDN-210 Lite, NDN-210 Pro, NDN-211 Lite, and NDN-211 Pro before 3.8 allows Command Injection (issue 1 of 4). The NDN-210 has a web administration panel which is made available over https. The logon method is basic authentication. There is a command injection issue that will result in unauthenticated remote code execution in the username and password fields of the logon prompt. The NDN-210 is part of Barco TransForm N solution and includes the patch from TransForm N version 3.8 onwards. | |||||
| CVE-2018-14067 | 1 Greenpacket | 2 Dv-360, Dv-360 Firmware | 2021-01-06 | 10.0 HIGH | 9.8 CRITICAL |
| Green Packet WiMax DV-360 2.10.14-g1.0.6.1 devices allow Command Injection, with unauthenticated remote command execution, via a crafted payload to the HTTPS port, because lighttpd listens on all network interfaces (including the external Internet) by default. NOTE: this may overlap CVE-2017-9980. | |||||
| CVE-2020-29299 | 1 Zyxel | 7 Atp, Nsg, Nsg Firmware and 4 more | 2021-01-05 | 9.0 HIGH | 7.2 HIGH |
| Certain Zyxel products allow command injection by an admin via an input string to chg_exp_pwd during a password-change action. This affects VPN On-premise before ZLD V4.39 week38, VPN Orchestrator before SD-OS V10.03 week32, USG before ZLD V4.39 week38, USG FLEX before ZLD V4.55 week38, ATP before ZLD V4.55 week38, and NSG before 1.33 patch 4. | |||||
| CVE-2020-35798 | 1 Netgear | 60 R6400v2, R6400v2 Firmware, R6700v3 and 57 more | 2021-01-04 | 7.2 HIGH | 7.8 HIGH |
| Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects R6400v2 before 1.0.4.84, R6700v3 before 1.0.4.84, R6900P before 1.3.2.124, R7000 before 1.0.11.100, R7000P before 1.3.2.124, R7800 before 1.0.2.74, R7850 before 1.0.5.60, R7900 before 1.0.4.26, R7960P before 1.4.1.50, R8000 before 1.0.4.52, R7900P before 1.4.1.50, R8000P before 1.4.1.50, RAX15 before 1.0.1.64, RAX20 before 1.0.1.64, RAX200 before 1.0.1.12, RAX45 before 1.0.2.66, RAX50 before 1.0.2.66, RAX75 before 1.0.3.102, RAX80 before 1.0.3.102, RBK752 before 3.2.16.6, RBR750 before 3.2.16.6, RBS750 before 3.2.16.6, RBK852 before 3.2.15.25, RBR850 before 3.2.15.25, RBS850 before 3.2.15.25, RBK842 before 3.2.15.25, RBR840 before 3.2.15.25, RBS840 before 3.2.15.25, RS400 before 1.5.0.48, and XR300 before 1.0.3.50. | |||||
| CVE-2020-35793 | 1 Netgear | 10 D7800, D7800 Firmware, R7500 and 7 more | 2020-12-31 | 4.6 MEDIUM | 6.7 MEDIUM |
| Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.58, R7500v2 before 1.0.3.46, R7800 before 1.0.2.74, R8900 before 1.0.5.2, and R9000 before 1.0.5.2. | |||||
| CVE-2020-35792 | 1 Netgear | 8 R7500, R7500 Firmware, R7800 and 5 more | 2020-12-31 | 5.2 MEDIUM | 6.8 MEDIUM |
| Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7500v2 before 1.0.3.48, R8900 before 1.0.5.2, R9000 before 1.0.5.2, and R7800 before 1.0.2.68. | |||||
| CVE-2020-35794 | 1 Netgear | 14 Rbk752, Rbk752 Firmware, Rbk852 and 11 more | 2020-12-30 | 5.2 MEDIUM | 6.8 MEDIUM |
| Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RBS40V before 2.6.1.4, RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25. | |||||
| CVE-2020-35790 | 1 Netgear | 8 D7800, D7800 Firmware, R7800 and 5 more | 2020-12-30 | 5.2 MEDIUM | 6.8 MEDIUM |
| Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.56, R7800 before 1.0.2.68, R8900 before 1.0.4.26, and R9000 before 1.0.4.26. | |||||
| CVE-2020-35791 | 1 Netgear | 6 R7800, R7800 Firmware, R8900 and 3 more | 2020-12-30 | 4.6 MEDIUM | 6.7 MEDIUM |
| Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R7800 before 1.0.2.68, R8900 before 1.0.5.2, and R9000 before 1.0.5.2. | |||||
| CVE-2020-35777 | 1 Netgear | 2 Dgn2200v1, Dgn2200v1 Firmware | 2020-12-30 | 7.7 HIGH | 8.4 HIGH |
| NETGEAR DGN2200v1 devices before v1.0.0.58 are affected by command injection. | |||||
| CVE-2020-25847 | 1 Qnap | 2 Qts, Quts Hero | 2020-12-30 | 6.5 MEDIUM | 8.8 HIGH |
| This command injection vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions of QTS and QuTS hero. | |||||
| CVE-2020-26273 | 1 Linuxfoundation | 1 Osquery | 2020-12-18 | 3.6 LOW | 5.2 MEDIUM |
| osquery is a SQL powered operating system instrumentation, monitoring, and analytics framework. In osquery before version 4.6.0, by using sqlite's ATTACH verb, someone with administrative access to osquery can cause reads and writes to arbitrary sqlite databases on disk. This _does_ allow arbitrary files to be created, but they will be sqlite databases. It does not appear to allow existing non-sqlite files to be overwritten. This has been patched in osquery 4.6.0. There are several mitigating factors and possible workarounds. In some deployments, the people with access to these interfaces may be considered administrators. In some deployments, configuration is managed by a central tool. This tool can filter for the `ATTACH` keyword. osquery can be run as non-root user. Because this also limits the desired access levels, this requires deployment specific testing and configuration. | |||||
| CVE-2019-19875 | 1 Br-automation | 1 Industrial Automation Aprol | 2020-12-03 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered in B&R Industrial Automation APROL before R4.2 V7.08. Arbitrary commands could be injected (using Python scripts) via the AprolCluster script that is invoked via sudo and thus executes with root privileges, a different vulnerability than CVE-2019-16364. | |||||
| CVE-2020-9116 | 1 Huawei | 1 Fusioncompute | 2020-12-02 | 6.5 MEDIUM | 7.2 HIGH |
| Huawei FusionCompute versions 6.5.1 and 8.0.0 have a command injection vulnerability. An authenticated, remote attacker can craft specific request to exploit this vulnerability. Due to insufficient verification, this could be exploited to cause the attackers to obtain higher privilege. | |||||
| CVE-2020-2490 | 1 Qnap | 1 Qts | 2020-11-30 | 6.5 MEDIUM | 7.2 HIGH |
| If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907. | |||||
| CVE-2020-2492 | 1 Qnap | 1 Qts | 2020-11-30 | 6.5 MEDIUM | 7.2 HIGH |
| If exploited, the command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. QTS versions prior to 4.4.3.1421 on build 20200907. | |||||
| CVE-2005-2793 | 1 Phpldapadmin Project | 1 Phpldapadmin | 2020-11-16 | 7.5 HIGH | N/A |
| PHP remote file inclusion vulnerability in welcome.php in phpLDAPadmin 0.9.6 and 0.9.7 allows remote attackers to execute arbitrary PHP code via the custom_welcome_page parameter. | |||||
| CVE-2018-19949 | 1 Qnap | 1 Qts | 2020-11-13 | 7.5 HIGH | 9.8 CRITICAL |
| If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. QNAP has already fixed the issue in the following QTS versions. QTS 4.4.2.1231 on build 20200302; QTS 4.4.1.1201 on build 20200130; QTS 4.3.6.1218 on build 20200214; QTS 4.3.4.1190 on build 20200107; QTS 4.3.3.1161 on build 20200109; QTS 4.2.6 on build 20200109. | |||||
| CVE-2020-23639 | 1 Moxa | 2 Vport 461, Vport 461 Firmware | 2020-11-12 | 10.0 HIGH | 9.8 CRITICAL |
| A command injection vulnerability exists in Moxa Inc VPort 461 Series Firmware Version 3.4 or lower that could allow a remote attacker to execute arbitrary commands in Moxa's VPort 461 Series Industrial Video Servers. | |||||
| CVE-2010-2008 | 3 Canonical, Fedoraproject, Oracle | 3 Ubuntu Linux, Fedora, Mysql | 2020-11-09 | 3.5 LOW | N/A |
| MySQL before 5.1.48 allows remote authenticated users with alter database privileges to cause a denial of service (server crash and database loss) via an ALTER DATABASE command with a #mysql50# string followed by a . (dot), .. (dot dot), ../ (dot dot slash) or similar sequence, and an UPGRADE DATA DIRECTORY NAME command, which causes MySQL to move certain directories to the server data directory. | |||||
| CVE-2018-19950 | 1 Qnap | 2 Music Station, Qts | 2020-11-02 | 7.5 HIGH | 9.8 CRITICAL |
| If exploited, this command injection vulnerability could allow remote attackers to execute arbitrary commands. This issue affects: QNAP Systems Inc. Music Station versions prior to 5.1.13; versions prior to 5.2.9; versions prior to 5.3.11. | |||||
| CVE-2019-1010174 | 1 Cimg | 1 The Cimg Library | 2020-11-02 | 7.5 HIGH | 9.8 CRITICAL |
| CImg The CImg Library v.2.3.3 and earlier is affected by: command injection. The impact is: RCE. The component is: load_network() function. The attack vector is: Loading an image from a user-controllable url can lead to command injection, because no string sanitization is done on the url. The fixed version is: v.2.3.4. | |||||
| CVE-2020-4636 | 2 Ibm, Linux | 2 Resilient Security Orchestration Automation And Response, Linux Kernel | 2020-10-19 | 6.5 MEDIUM | 7.2 HIGH |
| IBM Resilient OnPrem 38.2 could allow a privileged user to inject malicious commands through Python3 scripting. IBM X-Force ID: 185503. | |||||
| CVE-2020-26902 | 1 Netgear | 12 Rbk752, Rbk752 Firmware, Rbk852 and 9 more | 2020-10-16 | 8.3 HIGH | 8.8 HIGH |
| Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25. | |||||
| CVE-2020-26920 | 1 Netgear | 6 Srk60, Srk60 Firmware, Srr60 and 3 more | 2020-10-16 | 5.8 MEDIUM | 8.8 HIGH |
| Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects SRK60 before 2.5.3.110, SRR60 before 2.5.3.110, and SRS60 before 2.5.3.110. | |||||
| CVE-2020-26907 | 1 Netgear | 6 Rbk852, Rbk852 Firmware, Rbr850 and 3 more | 2020-10-16 | 7.7 HIGH | 8.8 HIGH |
| Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects RBK852 before 3.2.16.6, RBR850 before 3.2.16.6, and RBS850 before 3.2.16.6. | |||||
| CVE-2020-26909 | 1 Netgear | 4 D7800, D7800 Firmware, R7500v2 and 1 more | 2020-10-16 | 8.3 HIGH | 8.8 HIGH |
| Certain NETGEAR devices are affected by command injection by an unauthenticated attacker. This affects D7800 before 1.0.1.58 and R7500v2 before 1.0.3.48. | |||||
| CVE-2020-26910 | 1 Netgear | 14 Cbr40, Cbr40 Firmware, Rbk752 and 11 more | 2020-10-16 | 5.2 MEDIUM | 6.8 MEDIUM |
| Certain NETGEAR devices are affected by command injection by an authenticated user. This affects CBR40 before 2.5.0.10, RBK752 before 3.2.15.25, RBR750 before 3.2.15.25, RBS750 before 3.2.15.25, RBK852 before 3.2.15.25, RBR850 before 3.2.15.25, and RBS850 before 3.2.15.25. | |||||
| CVE-2020-26914 | 1 Netgear | 28 D6200, D6200 Firmware, D7000 and 25 more | 2020-10-16 | 5.2 MEDIUM | 7.1 HIGH |
| Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D6200 before 1.1.00.38, D7000 before 1.0.1.78, JR6150 before 1.0.1.24, R6020 before 1.0.0.42, R6050 before 1.0.1.24, R6080 before 1.0.0.42, R6120 before 1.0.0.66, R6220 before 1.1.0.100, R6260 before 1.1.0.64, R6700v2 before 1.2.0.62, R6800 before 1.2.0.62, R6900v2 before 1.2.0.62, R7450 before 1.2.0.62, and WNR2020 before 1.1.0.62. | |||||
| CVE-2020-26929 | 1 Netgear | 4 R6220, R6220 Firmware, R6230 and 1 more | 2020-10-16 | 5.2 MEDIUM | 8.0 HIGH |
| Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6220 before 1.1.0.100 and R6230 before 1.1.0.100. | |||||
| CVE-2020-26922 | 1 Netgear | 8 Wc7500, Wc7500 Firmware, Wc7600 and 5 more | 2020-10-15 | 4.6 MEDIUM | 6.7 MEDIUM |
| Certain NETGEAR devices are affected by command injection by an authenticated user. This affects WC7500 before 6.5.5.24, WC7600 before 6.5.5.24, WC7600v2 before 6.5.5.24, and WC9500 before 6.5.5.24. | |||||
| CVE-2019-14868 | 3 Apple, Debian, Ksh Project | 3 Mac Os X, Debian Linux, Ksh | 2020-10-09 | 7.2 HIGH | 7.8 HIGH |
| In ksh version 20120801, a flaw was found in the way it evaluates certain environment variables. An attacker could use this flaw to override or bypass environment restrictions to execute shell commands. Services and applications that allow remote unauthenticated attackers to provide one of those environment variables could allow them to exploit this issue remotely. | |||||
| CVE-2019-15575 | 1 Gitlab | 1 Gitlab | 2020-10-09 | 5.0 MEDIUM | 7.5 HIGH |
| A command injection exists in GitLab CE/EE <v12.3.2, <v12.2.6, and <v12.1.12 that allowed an attacker to inject commands via the API through the blobs scope. | |||||
| CVE-2019-6739 | 1 Malwarebytes | 1 Antimalware | 2020-10-06 | 6.8 MEDIUM | 8.8 HIGH |
| This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Malwarebytes Antimalware 3.6.1.2711. User interaction is required to exploit this vulnerability in that the target must visit a malicious web page. There is an issue with the way the product handles URIs within certain schemes. The product does not warn the user that a dangerous navigation is about to take place. Because special characters in the URI are not sanitized, this could lead to the execution of arbitrary commands. An attacker can leverage this vulnerability to execute code in the context of the current user at medium integrity. Was ZDI-CAN-7162. | |||||
| CVE-2019-1646 | 1 Cisco | 12 Sd-wan, Vbond Orchestrator, Vedge 100 and 9 more | 2020-10-05 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the local CLI of the Cisco SD-WAN Solution could allow an authenticated, local attacker to escalate privileges and modify device configuration files. The vulnerability exists because user input is not properly sanitized for certain commands at the CLI. An attacker could exploit this vulnerability by sending crafted commands to the CLI of an affected device. A successful exploit could allow the attacker to establish an interactive session with elevated privileges. The attacker could then use the elevated privileges to further compromise the device or obtain additional configuration data from the device. | |||||
| CVE-2016-7076 | 1 Sudo Project | 1 Sudo | 2020-09-30 | 7.2 HIGH | 7.8 HIGH |
| sudo before version 1.8.18p1 is vulnerable to a bypass in the sudo noexec restriction if application run via sudo executed wordexp() C library function with a user supplied argument. A local user permitted to run such application via sudo with noexec restriction could possibly use this flaw to execute arbitrary commands with elevated privileges. | |||||
| CVE-2019-0541 | 1 Microsoft | 13 Excel Viewer, Internet Explorer, Office and 10 more | 2020-09-28 | 9.3 HIGH | 8.8 HIGH |
| A remote code execution vulnerability exists in the way that the MSHTML engine inproperly validates input, aka "MSHTML Engine Remote Code Execution Vulnerability." This affects Microsoft Office, Microsoft Office Word Viewer, Internet Explorer 9, Internet Explorer 11, Microsoft Excel Viewer, Internet Explorer 10, Office 365 ProPlus. | |||||
| CVE-2020-24561 | 1 Trendmicro | 1 Serverprotect | 2020-09-24 | 9.0 HIGH | 9.1 CRITICAL |
| A command injection vulnerability in Trend Micro ServerProtect for Linux 3.0 could allow an attacker to execute arbitrary code on an affected system. An attacker must first obtain admin/root privileges on the SPLX console to exploit this vulnerability. | |||||
| CVE-2017-7876 | 1 Qnap | 1 Qts | 2020-09-11 | 7.5 HIGH | 9.8 CRITICAL |
| This command injection vulnerability in QTS allows attackers to run arbitrary commands in the compromised application. QNAP have already fixed the issue in QTS 4.2.6 build 20170517, QTS 4.3.3.0174 build 20170503 and later versions. | |||||
| CVE-2015-2857 | 1 Accellion | 1 File Transfer Appliance | 2020-09-09 | 7.5 HIGH | 9.8 CRITICAL |
| Accellion File Transfer Appliance before FTA_9_11_210 allows remote attackers to execute arbitrary code via shell metacharacters in the oauth_token parameter. | |||||
| CVE-2019-7839 | 1 Adobe | 1 Coldfusion | 2020-09-04 | 10.0 HIGH | 9.8 CRITICAL |
| ColdFusion versions Update 3 and earlier, Update 10 and earlier, and Update 18 and earlier have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution. | |||||
| CVE-2019-8073 | 1 Adobe | 1 Coldfusion | 2020-09-04 | 10.0 HIGH | 9.8 CRITICAL |
| ColdFusion 2018- update 4 and earlier and ColdFusion 2016- update 11 and earlier have a Command Injection via Vulnerable component vulnerability. Successful exploitation could lead to Arbitrary code execution in the context of the current user. | |||||
| CVE-2019-20726 | 1 Netgear | 22 D3600, D3600 Firmware, D6000 and 19 more | 2020-08-24 | 5.2 MEDIUM | 6.8 MEDIUM |
| Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D3600 before 1.0.0.75, D6000 before 1.0.0.75, D6100 before 1.0.0.63, R7800 before 1.0.2.52, R8900 before 1.0.4.2, R9000 before 1.0.4.2, WNDR3700v4 before 1.0.2.102, WNDR4300v1 before 1.0.2.104, WNDR4300v2 before 1.0.0.58, WNDR4500v3 before 1.0.0.58, WNR2000v5 before 1.0.0.68, and XR500 before 2.3.2.32. | |||||