Filtered by vendor Yubico
Subscribe
Search
Total
12 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-31924 | 2 Fedoraproject, Yubico | 2 Fedora, Pam-u2f | 2022-07-12 | 4.6 MEDIUM | 6.8 MEDIUM |
| Yubico pam-u2f before 1.1.1 has a logic issue that, depending on the pam-u2f configuration and the application used, could lead to a local PIN bypass. This issue does not allow user presence (touch) or cryptographic signature verification to be bypassed, so an attacker would still need to physically possess and interact with the YubiKey or another enrolled authenticator. If pam-u2f is configured to require PIN authentication, and the application using pam-u2f allows the user to submit NULL as the PIN, pam-u2f will attempt to perform a FIDO2 authentication without PIN. If this authentication is successful, the PIN requirement is bypassed. | |||||
| CVE-2022-24584 | 1 Yubico | 1 Otp | 2022-07-01 | 4.0 MEDIUM | 6.5 MEDIUM |
| ** DISPUTED ** Incorrect access control in Yubico OTP functionality of the YubiKey hardware tokens along with the Yubico OTP validation server. The Yubico OTP supposedly creates hardware bound second factor credentials. When a user reprograms the OTP functionality by "writing" it on a token using the Yubico Personalization Tool, they can then upload the new configuration to Yubicos OTP validation servers. NOTE: the vendor disputes this because there is no way for a YubiKey device to prevent a user from deciding that a secret value, which is imported into the device, should also be stored elsewhere. | |||||
| CVE-2020-13132 | 1 Yubico | 3 Libykpiv, Piv Tool Manager, Yubikey Smart Card Minidriver | 2021-07-21 | 2.1 LOW | 4.6 MEDIUM |
| An issue was discovered in Yubico libykpiv before 2.1.0. An attacker can trigger an incorrect free() in the ykpiv_util_generate_key() function in lib/util.c through incorrect error handling code. This could be used to cause a denial of service attack. | |||||
| CVE-2020-15001 | 1 Yubico | 2 Yubikey 5 Nfc, Yubikey 5 Nfc Firmware | 2021-07-21 | 2.9 LOW | 5.3 MEDIUM |
| An information leak was discovered on Yubico YubiKey 5 NFC devices 5.0.0 to 5.2.6 and 5.3.0 to 5.3.1. The OTP application allows a user to set optional access codes on OTP slots. This access code is intended to prevent unauthorized changes to OTP configurations. The access code is not checked when updating NFC specific components of the OTP configurations. This may allow an attacker to access configured OTPs and passwords stored in slots that were not configured by the user to be read over NFC, despite a user having set an access code. (Users who have not set an access code, or who have not configured the OTP slots, are not impacted by this issue.) | |||||
| CVE-2021-32489 | 1 Yubico | 1 Yubihsm-shell | 2021-05-19 | 3.5 LOW | 4.4 MEDIUM |
| An issue was discovered in the _send_secure_msg() function of Yubico yubihsm-shell through 2.0.3. The function does not correctly validate the embedded length field of an authenticated message received from the device because response_msg.st.len=8 can be accepted but triggers an integer overflow, which causes CRYPTO_cbc128_decrypt (in OpenSSL) to encounter an undersized buffer and experience a segmentation fault. The yubihsm-shell project is included in the YubiHSM 2 SDK product. | |||||
| CVE-2021-27217 | 1 Yubico | 1 Yubihsm-shell | 2021-03-26 | 3.5 LOW | 4.4 MEDIUM |
| An issue was discovered in the _send_secure_msg() function of Yubico yubihsm-shell through 2.0.3. The function does not correctly validate the embedded length field of an authenticated message received from the device. Out-of-bounds reads performed by aes_remove_padding() can crash the running process, depending on the memory layout. This could be used by an attacker to cause a client-side denial of service. The yubihsm-shell project is included in the YubiHSM 2 SDK product. | |||||
| CVE-2021-3011 | 4 Ftsafe, Google, Nxp and 1 more | 48 K13, K21, K40 and 45 more | 2021-01-20 | 1.9 LOW | 4.2 MEDIUM |
| An electromagnetic-wave side-channel issue was discovered on NXP SmartMX / P5x security microcontrollers and A7x secure authentication microcontrollers, with CryptoLib through v2.9. It allows attackers to extract the ECDSA private key after extensive physical access (and consequently produce a clone). This was demonstrated on the Google Titan Security Key, based on an NXP A7005a chip. Other FIDO U2F security keys are also impacted (Yubico YubiKey Neo and Feitian K9, K13, K21, and K40) as well as several NXP JavaCard smartcards (J3A081, J2A081, J3A041, J3D145_M59, J2D145_M59, J3D120_M60, J3D082_M60, J2D120_M60, J2D082_M60, J3D081_M59, J2D081_M59, J3D081_M61, J2D081_M61, J3D081_M59_DF, J3D081_M61_DF, J3E081_M64, J3E081_M66, J2E081_M64, J3E041_M66, J3E016_M66, J3E016_M64, J3E041_M64, J3E145_M64, J3E120_M65, J3E082_M65, J2E145_M64, J2E120_M65, J2E082_M65, J3E081_M64_DF, J3E081_M66_DF, J3E041_M66_DF, J3E016_M66_DF, J3E041_M64_DF, and J3E016_M64_DF). | |||||
| CVE-2020-15000 | 1 Yubico | 2 Yubikey 5 Nfc, Yubikey 5 Nfc Firmware | 2020-07-21 | 4.3 MEDIUM | 5.9 MEDIUM |
| A PIN management problem was discovered on Yubico YubiKey 5 devices 5.2.0 to 5.2.6. OpenPGP has three passwords: Admin PIN, Reset Code, and User PIN. The Reset Code is used to reset the User PIN, but it is disabled by default. A flaw in the implementation of OpenPGP sets the Reset Code to a known value upon initialization. If the retry counter for the Reset Code is set to non-zero without changing the Reset Code, this known value can be used to reset the User PIN. To set the retry counters, the Admin PIN is required. | |||||
| CVE-2020-13131 | 1 Yubico | 3 Libykpiv, Piv Tool Manager, Yubikey Smart Card Minidriver | 2020-07-16 | 1.9 LOW | 4.3 MEDIUM |
| An issue was discovered in Yubico libykpiv before 2.1.0. lib/util.c in this library (which is included in yubico-piv-tool) does not properly check embedded length fields during device communication. A malicious PIV token can misreport the returned length fields during RSA key generation. This will cause stack memory to be copied into heap allocated memory that gets returned to the caller. The leaked memory could include PINs, passwords, key material, and other sensitive information depending on the integration. During further processing by the caller, this information could leak across trust boundaries. Note that RSA key generation is triggered by the host and cannot directly be triggered by the token. | |||||
| CVE-2018-14779 | 1 Yubico | 3 Piv Manager, Piv Tool, Smart Card Minidriver | 2020-02-25 | 7.2 HIGH | 6.8 MEDIUM |
| A buffer overflow issue was discovered in the Yubico-Piv 1.5.0 smartcard driver. The file lib/ykpiv.c contains the following code in the function `ykpiv_transfer_data()`: {% highlight c %} if(*out_len + recv_len - 2 > max_out) { fprintf(stderr, "Output buffer to small, wanted to write %lu, max was %lu.", *out_len + recv_len - 2, max_out); } if(out_data) { memcpy(out_data, data, recv_len - 2); out_data += recv_len - 2; *out_len += recv_len - 2; } {% endhighlight %} -- it is clearly checked whether the buffer is big enough to hold the data copied using `memcpy()`, but no error handling happens to avoid the `memcpy()` in such cases. This code path can be triggered with malicious data coming from a smartcard. | |||||
| CVE-2018-14780 | 1 Yubico | 3 Piv Manager, Piv Tool, Smart Card Minidriver | 2020-02-25 | 2.1 LOW | 4.6 MEDIUM |
| An out-of-bounds read issue was discovered in the Yubico-Piv 1.5.0 smartcard driver. The file lib/ykpiv.c contains the following code in the function `_ykpiv_fetch_object()`: {% highlight c %} if(sw == SW_SUCCESS) { size_t outlen; int offs = _ykpiv_get_length(data + 1, &outlen); if(offs == 0) { return YKPIV_SIZE_ERROR; } memmove(data, data + 1 + offs, outlen); *len = outlen; return YKPIV_OK; } else { return YKPIV_GENERIC_ERROR; } {% endhighlight %} -- in the end, a `memmove()` occurs with a length retrieved from APDU data. This length is not checked for whether it is outside of the APDU data retrieved. Therefore the `memmove()` could copy bytes behind the allocated data buffer into this buffer. | |||||
| CVE-2018-20340 | 2 Debian, Yubico | 2 Debian Linux, Libu2f-host | 2019-12-05 | 4.6 MEDIUM | 6.8 MEDIUM |
| Yubico libu2f-host 1.1.6 contains unchecked buffers in devs.c, which could enable a malicious token to exploit a buffer overflow. An attacker could use this to attempt to execute malicious code using a crafted USB device masquerading as a security token on a computer where the affected library is currently in use. It is not possible to perform this attack with a genuine YubiKey. | |||||