Filtered by vendor Cisco
Subscribe
Search
Total
1504 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2020-3530 | 1 Cisco | 23 Asr 9000v, Asr 9001, Asr 9006 and 20 more | 2020-09-09 | 5.6 MEDIUM | 8.4 HIGH |
| A vulnerability in task group assignment for a specific CLI command in Cisco IOS XR Software could allow an authenticated, local attacker to execute that command, even though administrative privileges should be required. The attacker must have valid credentials on the affected device. The vulnerability is due to incorrect mapping in the source code of task group assignments for a specific command. An attacker could exploit this vulnerability by issuing the command, which they should not be authorized to issue, on an affected device. A successful exploit could allow the attacker to invalidate the integrity of the disk and cause the device to restart. This vulnerability could allow a user with read permissions to issue a specific command that should require Administrator privileges. | |||||
| CVE-2020-3507 | 1 Cisco | 16 8000p Ip Camera, 8000p Ip Camera Firmware, 8020 Ip Camera and 13 more | 2020-09-09 | 8.3 HIGH | 8.8 HIGH |
| Multiple vulnerabilities in the Cisco Discovery Protocol implementation for Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to execute code remotely or cause a reload of an affected IP camera. These vulnerabilities are due to missing checks when the IP cameras process a Cisco Discovery Protocol packet. An attacker could exploit these vulnerabilities by sending a malicious Cisco Discovery Protocol packet to the targeted IP camera. A successful exploit could allow the attacker to execute code on the affected IP camera or cause it to reload unexpectedly, resulting in a denial of service (DoS) condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). | |||||
| CVE-2020-3506 | 1 Cisco | 16 8000p Ip Camera, 8000p Ip Camera Firmware, 8020 Ip Camera and 13 more | 2020-09-09 | 8.3 HIGH | 8.8 HIGH |
| Multiple vulnerabilities in the Cisco Discovery Protocol implementation for Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to execute code remotely or cause a reload of an affected IP camera. These vulnerabilities are due to missing checks when the IP cameras process a Cisco Discovery Protocol packet. An attacker could exploit these vulnerabilities by sending a malicious Cisco Discovery Protocol packet to the targeted IP camera. A successful exploit could allow the attacker to execute code on the affected IP camera or cause it to reload unexpectedly, resulting in a denial of service (DoS) condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). | |||||
| CVE-2020-3394 | 1 Cisco | 65 Nexus 3016, Nexus 3048, Nexus 3064 and 62 more | 2020-09-09 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the Enable Secret feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to issue the enable command and get full administrative privileges. To exploit this vulnerability, the attacker would need to have valid credentials for the affected device. The vulnerability is due to a logic error in the implementation of the enable command. An attacker could exploit this vulnerability by logging in to the device and issuing the enable command. A successful exploit could allow the attacker to gain full administrative privileges without using the enable password. Note: The Enable Secret feature is disabled by default. | |||||
| CVE-2018-0279 | 1 Cisco | 1 Enterprise Nfv Infrastructure Software | 2020-09-04 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the Secure Copy Protocol (SCP) server of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to access the shell of the underlying Linux operating system on the affected device. The vulnerability is due to improper input validation of command arguments. An attacker could exploit this vulnerability by using crafted arguments when opening a connection to the affected device. An exploit could allow the attacker to gain shell access with a non-root user account to the underlying Linux operating system on the affected device. Due to the system design, access to the Linux shell could allow execution of additional attacks that may have a significant impact on the affected system. This vulnerability affects Cisco devices that are running release 3.7.1, 3.6.3, or earlier releases of Cisco Enterprise NFV Infrastructure Software (NFVIS) when access to the SCP server is allowed on the affected device. Cisco NFVIS Releases 3.5.x and 3.6.x do allow access to the SCP server by default, while Cisco NFVIS Release 3.7.1 does not. Cisco Bug IDs: CSCvh25026. | |||||
| CVE-2018-0239 | 1 Cisco | 2 Asr 5700, Staros | 2020-09-04 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the egress packet processing functionality of the Cisco StarOS operating system for Cisco Aggregation Services Router (ASR) 5700 Series devices and Virtualized Packet Core (VPC) System Software could allow an unauthenticated, remote attacker to cause an interface on the device to cease forwarding packets. The device may need to be manually reloaded to clear this Interface Forwarding Denial of Service condition. The vulnerability is due to the failure to properly check that the length of a packet to transmit does not exceed the maximum supported length of the network interface card (NIC). An attacker could exploit this vulnerability by sending a crafted IP packet or a series of crafted IP fragments through an interface on the targeted device. A successful exploit could allow the attacker to cause the network interface to cease forwarding packets. This vulnerability could be triggered by either IPv4 or IPv6 network traffic. This vulnerability affects the following Cisco products when they are running the StarOS operating system and a virtual interface card is installed on the device: Aggregation Services Router (ASR) 5700 Series, Virtualized Packet Core-Distributed Instance (VPC-DI) System Software, Virtualized Packet Core-Single Instance (VPC-SI) System Software. Cisco Bug IDs: CSCvf32385. | |||||
| CVE-2018-0172 | 2 Cisco, Rockwellautomation | 8 Ios, Ios Xe, Allen-bradley Armorstratix 5700 and 5 more | 2020-09-04 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the DHCP option 82 encapsulation functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of option 82 information that it receives in DHCP Version 4 (DHCPv4) packets from DHCP relay agents. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device. A successful exploit could allow the attacker to cause a heap overflow condition on the affected device, which will cause the device to reload and result in a DoS condition. Cisco Bug IDs: CSCvg62730. | |||||
| CVE-2018-0155 | 2 Cisco, Rockwellautomation | 13 Catalyst 4500-x Series Switches \(k10\), Catalyst 4500 Supervisor Engine 6-e \(k5\), Catalyst 4500 Supervisor Engine 6l-e \(k10\) and 10 more | 2020-09-04 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Bidirectional Forwarding Detection (BFD) offload implementation of Cisco Catalyst 4500 Series Switches and Cisco Catalyst 4500-X Series Switches could allow an unauthenticated, remote attacker to cause a crash of the iosd process, causing a denial of service (DoS) condition. The vulnerability is due to insufficient error handling when the BFD header in a BFD packet is incomplete. An attacker could exploit this vulnerability by sending a crafted BFD message to or across an affected switch. A successful exploit could allow the attacker to trigger a reload of the system. This vulnerability affects Catalyst 4500 Supervisor Engine 6-E (K5), Catalyst 4500 Supervisor Engine 6L-E (K10), Catalyst 4500 Supervisor Engine 7-E (K10), Catalyst 4500 Supervisor Engine 7L-E (K10), Catalyst 4500E Supervisor Engine 8-E (K10), Catalyst 4500E Supervisor Engine 8L-E (K10), Catalyst 4500E Supervisor Engine 9-E (K10), Catalyst 4500-X Series Switches (K10), Catalyst 4900M Switch (K5), Catalyst 4948E Ethernet Switch (K5). Cisco Bug IDs: CSCvc40729. | |||||
| CVE-2018-0139 | 1 Cisco | 1 Unified Customer Voice Portal | 2020-09-04 | 5.0 MEDIUM | 8.6 HIGH |
| A vulnerability in the Interactive Voice Response (IVR) management connection interface for Cisco Unified Customer Voice Portal (CVP) could allow an unauthenticated, remote attacker to cause the IVR connection to disconnect, creating a system-wide denial of service (DoS) condition. The vulnerability is due to improper handling of a TCP connection request when the IVR connection is already established. An attacker could exploit this vulnerability by initiating a crafted connection to the IP address of the targeted CVP device. An exploit could allow the attacker to disconnect the IVR to CVP connection, creating a DoS condition that prevents the CVP from accepting new, incoming calls while the IVR automatically attempts to re-establish the connection to the CVP. This vulnerability affects Cisco Unified Customer Voice Portal (CVP) Software Release 11.5(1). Cisco Bug IDs: CSCve70560. | |||||
| CVE-2018-0136 | 1 Cisco | 9 Asr 9001, Asr 9006, Asr 9010 and 6 more | 2020-09-04 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the IPv6 subsystem of Cisco IOS XR Software Release 5.3.4 for the Cisco Aggregation Services Router (ASR) 9000 Series could allow an unauthenticated, remote attacker to trigger a reload of one or more Trident-based line cards, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect handling of IPv6 packets with a fragment header extension. An attacker could exploit this vulnerability by sending IPv6 packets designed to trigger the issue either to or through the Trident-based line card. A successful exploit could allow the attacker to trigger a reload of Trident-based line cards, resulting in a DoS during the period of time the line card takes to restart. This vulnerability affects Cisco Aggregation Services Router (ASR) 9000 Series when the following conditions are met: The router is running Cisco IOS XR Software Release 5.3.4, and the router has installed Trident-based line cards that have IPv6 configured. A software maintenance upgrade (SMU) has been made available that addresses this vulnerability. The fix has also been incorporated into service pack 7 for Cisco IOS XR Software Release 5.3.4. Cisco Bug IDs: CSCvg46800. | |||||
| CVE-2020-3566 | 1 Cisco | 10 Asr 9001, Asr 9006, Asr 9010 and 7 more | 2020-09-04 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust process memory of an affected device. The vulnerability is due to insufficient queue management for Internet Group Management Protocol (IGMP) packets. An attacker could exploit this vulnerability by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to cause memory exhaustion, resulting in instability of other processes. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address this vulnerability. | |||||
| CVE-2018-0114 | 1 Cisco | 1 Node-jose | 2020-09-04 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the Cisco node-jose open source library before 0.11.0 could allow an unauthenticated, remote attacker to re-sign tokens using a key that is embedded within the token. The vulnerability is due to node-jose following the JSON Web Signature (JWS) standard for JSON Web Tokens (JWTs). This standard specifies that a JSON Web Key (JWK) representing a public key can be embedded within the header of a JWS. This public key is then trusted for verification. An attacker could exploit this by forging valid JWS objects by removing the original signature, adding a new public key to the header, and then signing the object using the (attacker-owned) private key associated with the public key embedded in that JWS header. | |||||
| CVE-2017-3864 | 1 Cisco | 2 Ios, Ios Xe | 2020-09-04 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892. | |||||
| CVE-2020-3517 | 1 Cisco | 98 Firepower 4110, Firepower 4112, Firepower 4115 and 95 more | 2020-09-04 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated attacker to cause process crashes, which could result in a denial of service (DoS) condition on an affected device. The attack vector is configuration dependent and could be remote or adjacent. For more information about the attack vector, see the Details section of this advisory. The vulnerability is due to insufficient error handling when the affected software parses Cisco Fabric Services messages. An attacker could exploit this vulnerability by sending malicious Cisco Fabric Services messages to an affected device. A successful exploit could allow the attacker to cause a reload of an affected device, which could result in a DoS condition. | |||||
| CVE-2018-0313 | 1 Cisco | 72 Nexus 172tq-xl, Nexus 2148t, Nexus 2224tp Ge and 69 more | 2020-09-04 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to send a malicious packet to the management interface on an affected system and execute a command-injection exploit. The vulnerability is due to incorrect input validation of user-supplied data to the NX-API subsystem. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Note: NX-API is disabled by default. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd47415, CSCve03216, CSCve03224, CSCve03234. | |||||
| CVE-2018-0306 | 1 Cisco | 89 Mds 9132t, Mds 9148, Mds 9148s and 86 more | 2020-09-04 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI parser of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected device. Note: This vulnerability requires that any feature license is uploaded to the device. The vulnerability does not require that the license be used. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51693, CSCve91634, CSCve91659, CSCve91663. | |||||
| CVE-2018-0302 | 1 Cisco | 13 Firepower 4110, Firepower 4120, Firepower 4140 and 10 more | 2020-09-04 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI parser of Cisco FXOS Software and Cisco UCS Fabric Interconnect Software could allow an authenticated, local attacker to cause a buffer overflow on an affected device. The vulnerability is due to incorrect input validation in the CLI parser subsystem. An attacker could exploit this vulnerability by exceeding the expected length of user input. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61099, CSCvb86743. | |||||
| CVE-2018-0307 | 1 Cisco | 65 Nexus 172tq-xl, Nexus 3016, Nexus 3048 and 62 more | 2020-09-04 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker, authenticated as a privileged user, to execute arbitrary commands with root privileges. Note: On products that support multiple virtual device contexts (VDC), this vulnerability could allow an attacker to access files from any VDC. This vulnerability affects Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51704, CSCve91749, CSCve91768. | |||||
| CVE-2018-0338 | 1 Cisco | 1 Unified Computing System | 2020-09-04 | 4.6 MEDIUM | 7.8 HIGH |
| A vulnerability in the role-based access-checking mechanisms of Cisco Unified Computing System (UCS) Software could allow an authenticated, local attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software lacks proper input and validation checks for certain file systems. An attacker could exploit this vulnerability by issuing crafted commands in the CLI of an affected system. A successful exploit could allow the attacker to cause other users to execute unwanted arbitrary commands on the affected system. Cisco Bug IDs: CSCvf52994. | |||||
| CVE-2018-0274 | 1 Cisco | 1 Network Services Orchestrator | 2020-09-04 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the CLI parser of Cisco Network Services Orchestrator (NSO) could allow an authenticated, remote attacker to execute arbitrary shell commands with the privileges of the root user. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting malicious arguments into vulnerable commands. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected system. This vulnerability affects the following releases of Cisco Network Services Orchestrator (NSO): 4.1 through 4.1.6.0, 4.2 through 4.2.4.0, 4.3 through 4.3.3.0, 4.4 through 4.4.2.0. Cisco Bug IDs: CSCvf99982. | |||||
| CVE-2018-0263 | 1 Cisco | 1 Meeting Server | 2020-09-04 | 3.3 LOW | 7.4 HIGH |
| A vulnerability in Cisco Meeting Server (CMS) could allow an unauthenticated, adjacent attacker to access services running on internal device interfaces of an affected system. The vulnerability is due to incorrect default configuration of the device, which can expose internal interfaces and ports on the external interface of the system. A successful exploit could allow the attacker to gain unauthenticated access to configuration and database files and sensitive meeting information on an affected system. This vulnerability affects Cisco Meeting Server (CMS) 2000 Platforms that are running a CMS Software release prior to Release 2.2.13 or Release 2.3.4. Cisco Bug IDs: CSCvg76471. | |||||
| CVE-2020-3454 | 1 Cisco | 83 Mds 9000, Mds 9100, Mds 9134 and 80 more | 2020-09-04 | 9.0 HIGH | 7.2 HIGH |
| A vulnerability in the Call Home feature of Cisco NX-OS Software could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of specific Call Home configuration parameters when the software is configured for transport method HTTP. An attacker could exploit this vulnerability by modifying parameters within the Call Home configuration on an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying OS. | |||||
| CVE-2020-3415 | 1 Cisco | 66 Nexus 3016, Nexus 3048, Nexus 3064 and 63 more | 2020-09-03 | 7.9 HIGH | 8.8 HIGH |
| A vulnerability in the Data Management Engine (DME) of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the Cisco Discovery Protocol process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Exploitation of this vulnerability also requires jumbo frames to be enabled on the interface that receives the crafted Cisco Discovery Protocol packets on the affected device. | |||||
| CVE-2020-3443 | 1 Cisco | 1 Smart Software Manager On-prem | 2020-09-02 | 6.5 MEDIUM | 8.8 HIGH |
| A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to elevate privileges and execute commands with higher privileges. The vulnerability is due to insufficient authorization of the System Operator role capabilities. An attacker could exploit this vulnerability by logging in with the System Operator role, performing a series of actions, and then assuming a new higher privileged role. A successful exploit could allow the attacker to perform all actions associated with the privilege of the assumed role. If that role is an administrative role, the attacker would gain full access to the device. | |||||
| CVE-2018-0156 | 1 Cisco | 149 Catalyst 2960-plus 24lc-l, Catalyst 2960-plus 24lc-s, Catalyst 2960-plus 24pc-l and 146 more | 2020-09-02 | 7.8 HIGH | 7.5 HIGH |
| A vulnerability in the Smart Install feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of packet data. An attacker could exploit this vulnerability by sending a crafted packet to an affected device on TCP port 4786. Only Smart Install client switches are affected. Cisco devices that are configured as a Smart Install director are not affected by this vulnerability. Cisco Bug IDs: CSCvd40673. | |||||
| CVE-2019-12636 | 1 Cisco | 216 Sf200-24, Sf200-24 Firmware, Sf200-24fp and 213 more | 2020-09-01 | 6.8 MEDIUM | 8.8 HIGH |
| A vulnerability in the web-based management interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. The vulnerability is due to insufficient CSRF protections for the web-based management interface on an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the targeted user. If the user has administrative privileges, the attacker could alter the configuration, execute commands, or cause a denial of service (DoS) condition on an affected device. | |||||
| CVE-2018-15411 | 1 Cisco | 4 Webex Business Suite 32, Webex Business Suite 33, Webex Meetings Online and 1 more | 2020-09-01 | 9.3 HIGH | 7.8 HIGH |
| A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system. | |||||
| CVE-2018-15410 | 1 Cisco | 5 Webex Business Suite 31, Webex Business Suite 32, Webex Business Suite 33 and 2 more | 2020-08-31 | 9.3 HIGH | 7.8 HIGH |
| A vulnerability in the Cisco Webex Network Recording Player for Microsoft Windows and the Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerability exist because the affected software improperly validates Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file via a link or an email attachment and persuading the user to open the file by using the affected software. A successful exploit could allow the attacker to execute arbitrary code on the affected system. | |||||
| CVE-2018-15377 | 1 Cisco | 1 Ios | 2020-08-31 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Cisco Network Plug and Play agent, also referred to as the Cisco Open Plug-n-Play agent, of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a memory leak on an affected device. The vulnerability is due to insufficient input validation by the affected software. An attacker could exploit this vulnerability by sending invalid data to the Cisco Network Plug and Play agent on an affected device. A successful exploit could allow the attacker to cause a memory leak on the affected device, which could cause the device to reload. | |||||
| CVE-2018-0427 | 1 Cisco | 1 Application Policy Infrastructure Controller Enterprise Module | 2020-08-31 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the CronJob scheduler API of Cisco Digital Network Architecture (DNA) Center could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to incorrect input validation of user-supplied data. An attacker could exploit this vulnerability by sending a malicious packet. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Cisco Bug IDs: CSCvi42263. | |||||
| CVE-2018-0418 | 1 Cisco | 11 Asr 9000v, Asr 9001, Asr 9006 and 8 more | 2020-08-31 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the Local Packet Transport Services (LPTS) feature set of Cisco ASR 9000 Series Aggregation Services Router Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a lack of input and validation checking on certain Precision Time Protocol (PTP) ingress traffic to an affected device. An attacker could exploit this vulnerability by injecting malformed traffic into an affected device. A successful exploit could allow the attacker to cause services on the device to become unresponsive, resulting in a DoS condition. Cisco Bug IDs: CSCvj22858. | |||||
| CVE-2018-0409 | 1 Cisco | 2 Telepresence Video Communication Server, Unified Communications Manager Im And Presence Service | 2020-08-31 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the XCP Router service of the Cisco Unified Communications Manager IM & Presence Service (CUCM IM&P) and the Cisco TelePresence Video Communication Server (VCS) and Expressway could allow an unauthenticated, remote attacker to cause a temporary service outage for all IM&P users, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious IPv4 or IPv6 packet to an affected device on TCP port 7400. An exploit could allow the attacker to overread a buffer, resulting in a crash and restart of the XCP Router service. Cisco Bug IDs: CSCvg97663, CSCvi55947. | |||||
| CVE-2018-0348 | 1 Cisco | 19 Vbond Orchestrator, Vedge-100, Vedge-1000 and 16 more | 2020-08-31 | 9.0 HIGH | 7.2 HIGH |
| A vulnerability in the CLI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the load command within the VPN subsystem. The attacker must be authenticated to access the affected CLI parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69866. | |||||
| CVE-2018-0385 | 1 Cisco | 1 Firepower Management Center | 2020-08-31 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the detection engine parsing of Security Socket Layer (SSL) protocol packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the Snort process unexpectedly restarting. The vulnerability is due to improper input handling of the SSL traffic. An attacker could exploit this vulnerability by sending a crafted SSL traffic to the detection engine on the targeted device. An exploit could allow the attacker to cause a DoS condition if the Snort process restarts and traffic inspection is bypassed or traffic is dropped. Cisco Bug IDs: CSCvi36434. | |||||
| CVE-2018-0358 | 1 Cisco | 1 Telepresence Video Communication Server | 2020-08-31 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the file descriptor handling of Cisco TelePresence Video Communication Server (VCS) Expressway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to exhaustion of file descriptors while processing a high volume of traffic. An attacker could exploit this vulnerability by establishing a high number of concurrent TCP connections to the vulnerable system. An exploit could allow the attacker to cause a restart in a specific process, resulting in a temporary interruption of service. Cisco Bug IDs: CSCvh77056, CSCvh77058, CSCvh95264. | |||||
| CVE-2018-0337 | 1 Cisco | 15 Nexus 5000, Nexus 5010, Nexus 5020 and 12 more | 2020-08-31 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the role-based access-checking mechanisms of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on an affected device. The vulnerability exists because the affected software lacks proper input and validation checks for certain file systems. An attacker could exploit this vulnerability by issuing crafted commands in the CLI of an affected device. A successful exploit could allow the attacker to cause other users to execute unwanted, arbitrary commands on the affected device. Cisco Bug IDs: CSCvd06339, CSCvd15698, CSCvd36108, CSCvf52921, CSCvf52930, CSCvf52953, CSCvf52976. | |||||
| CVE-2018-0345 | 1 Cisco | 19 Vbond Orchestrator, Vedge-100, Vedge-1000 and 16 more | 2020-08-28 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the configuration and management database of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary commands with the privileges of the vmanage user in the configuration management system of the affected software. The vulnerability is due to insufficient validation of command arguments that are passed to the configuration and management database of the affected software. An attacker could exploit this vulnerability by creating custom functions that contain malicious code and are executed as the vmanage user of the configuration management system. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the vmanage user in the configuration management system of the affected software. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69937. | |||||
| CVE-2018-0443 | 1 Cisco | 1 Wireless Lan Controller Software | 2020-08-28 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol component of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper input validation on fields within CAPWAP Discovery Request packets by the affected device. An attacker could exploit this vulnerability by sending malicious CAPWAP Discovery Request packets to the Cisco WLC Software. A successful exploit could allow the attacker to cause the Cisco WLC Software to disconnect associated access points (APs). While the APs disconnect and reconnect, service will be unavailable for a brief period of time, resulting in a DoS condition. | |||||
| CVE-2018-0433 | 1 Cisco | 12 Vbond Orchestrator, Vedge 100, Vedge 1000 and 9 more | 2020-08-28 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in the command-line interface (CLI) in the Cisco SD-WAN Solution could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges. | |||||
| CVE-2018-0424 | 1 Cisco | 6 Rv110w Firmware, Rv110w Wireless-n Vpn Firewall, Rv130w and 3 more | 2020-08-28 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, Cisco RV130W Wireless-N Multifunction VPN Router, and Cisco RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input to scripts by the web-based management interface. An attacker could exploit this vulnerability by sending malicious requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the root user. | |||||
| CVE-2018-0474 | 1 Cisco | 1 Unified Communications Manager | 2020-08-28 | 4.0 MEDIUM | 8.8 HIGH |
| A vulnerability in the web-based management interface of Cisco Unified Communications Manager could allow an authenticated, remote attacker to view digest credentials in clear text. The vulnerability is due to the incorrect inclusion of saved passwords in configuration pages. An attacker could exploit this vulnerability by logging in to the Cisco Unified Communications Manager web-based management interface and viewing the source code for the configuration page. A successful exploit could allow the attacker to recover passwords and expose those accounts to further attack. | |||||
| CVE-2020-3519 | 1 Cisco | 1 Data Center Network Manager | 2020-08-28 | 5.5 MEDIUM | 8.1 HIGH |
| A vulnerability in a specific REST API method of Cisco Data Center Network Manager (DCNM) Software could allow an authenticated, remote attacker to conduct a path traversal attack on an affected device. The vulnerability is due to insufficient validation of user-supplied input to the API. An attacker could exploit this vulnerability by sending a crafted request to the API. A successful exploit could allow the attacker to overwrite arbitrary files on the affected device. | |||||
| CVE-2020-3500 | 1 Cisco | 4 Asr 5500, Asr 5700, Staros and 1 more | 2020-08-20 | 7.8 HIGH | 8.6 HIGH |
| A vulnerability in the IPv6 implementation of Cisco StarOS could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of incoming IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet to an affected device with the goal of reaching the vulnerable section of the input buffer. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. This vulnerability is specific to IPv6 traffic. IPv4 traffic is not affected. | |||||
| CVE-2020-3386 | 1 Cisco | 1 Data Center Network Manager | 2020-08-05 | 9.0 HIGH | 8.8 HIGH |
| A vulnerability in the REST API endpoint of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with a low-privileged account to bypass authorization on the API of an affected device. The vulnerability is due to insufficient authorization of certain API functions. An attacker could exploit this vulnerability by sending a crafted request to the API using low-privileged credentials. A successful exploit could allow the attacker to perform arbitrary actions through the REST API with administrative privileges. | |||||
| CVE-2011-2057 | 1 Cisco | 1 Ios | 2020-08-05 | 5.0 MEDIUM | 7.5 HIGH |
| The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle (1) a loop between a dot1x enabled port and an open-authentication dot1x enabled port and (2) a loop between a dot1x enabled port and a non-dot1x port, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) frames, aka Bug ID CSCtq36327. | |||||
| CVE-2011-2058 | 1 Cisco | 1 Ios | 2020-08-05 | 7.8 HIGH | 7.5 HIGH |
| The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle an external loop between a pair of dot1x enabled ports, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many unicast EAPoL Protocol Data Units (PDUs), aka Bug ID CSCtq36336. | |||||
| CVE-2011-1640 | 1 Cisco | 1 Ios | 2020-08-05 | 7.8 HIGH | 7.5 HIGH |
| The ethernet-lldp component in Cisco IOS 12.2 before 12.2(33)SXJ1 does not properly support a large number of LLDP Management Address (MA) TLVs, which allows remote attackers to cause a denial of service (device crash) via crafted LLDPDUs, aka Bug ID CSCtj22354. | |||||
| CVE-2020-3377 | 1 Cisco | 1 Data Center Network Manager | 2020-08-05 | 6.5 MEDIUM | 8.8 HIGH |
| A vulnerability in the Device Manager application of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to inject arbitrary commands on the affected device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted arguments to a specific field within the application. A successful exploit could allow the attacker to run commands as the administrator on the DCNM. | |||||
| CVE-2020-3384 | 1 Cisco | 1 Data Center Network Manager | 2020-08-05 | 6.0 MEDIUM | 8.2 HIGH |
| A vulnerability in specific REST API endpoints of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to inject arbitrary commands on the underlying operating system with the privileges of the logged-in user. The vulnerability is due to insufficient validation of user-supplied input to the API. An attacker could exploit this vulnerability by sending a crafted request to the API. A successful exploit could allow the attacker to inject arbitrary commands on the underlying operating system. | |||||
| CVE-2017-6743 | 1 Cisco | 2 Ios, Ios Xe | 2020-08-03 | 9.0 HIGH | 8.8 HIGH |
| The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve60376, CSCve78027. | |||||