Search
Total
1192 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-20557 | 2 Ibm, Linux | 2 Security Guardium, Linux Kernel | 2021-05-25 | 9.0 HIGH | 7.2 HIGH |
| IBM Security Guardium 11.2 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 199184. | |||||
| CVE-2021-1421 | 1 Cisco | 1 Enterprise Nfv Infrastructure Software | 2021-05-17 | 7.2 HIGH | 7.8 HIGH |
| A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to perform a command injection attack on an affected device. The vulnerability is due to insufficient validation of user-supplied input to a configuration command. An attacker could exploit this vulnerability by including malicious input during the execution of this command. A successful exploit could allow a non-privileged attacker authenticated in the restricted CLI to execute arbitrary commands on the underlying operating system (OS) with root privileges. | |||||
| CVE-2017-15049 | 1 Zoom | 1 Zoom | 2021-05-14 | 9.3 HIGH | 8.8 HIGH |
| The ZoomLauncher binary in the Zoom client for Linux before 2.0.115900.1201 does not properly sanitize user input when constructing a shell command, which allows remote attackers to execute arbitrary code by leveraging the zoommtg:// scheme handler. | |||||
| CVE-2021-28151 | 1 Hongdian | 2 H8922, H8922 Firmware | 2021-05-13 | 9.0 HIGH | 8.8 HIGH |
| Hongdian H8922 3.0.5 devices allow OS command injection via shell metacharacters into the ip-address (aka Destination) field to the tools.cgi ping command, which is accessible with the username guest and password guest. | |||||
| CVE-2020-21992 | 1 Inim | 12 Smartliving 10100l, Smartliving 10100l Firmware, Smartliving 10100lg3 and 9 more | 2021-05-12 | 9.0 HIGH | 8.8 HIGH |
| Inim Electronics SmartLiving SmartLAN/G/SI <=6.x suffers from an authenticated remote command injection vulnerability. The issue exist due to the 'par' POST parameter not being sanitized when called with the 'testemail' module through web.cgi binary. The vulnerable CGI binary (ELF 32-bit LSB executable, ARM) is calling the 'sh' executable via the system() function to issue a command using the mailx service and its vulnerable string format parameter allowing for OS command injection with root privileges. An attacker can remotely execute system commands as the root user using default credentials and bypass access controls in place. | |||||
| CVE-2020-21999 | 1 Iwt | 2 Facesentry Access Control System, Facesentry Access Control System Firmware | 2021-05-11 | 9.0 HIGH | 8.8 HIGH |
| iWT Ltd FaceSentry Access Control System 6.4.8 suffers from an authenticated OS command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell commands as the root user via the 'strInIP' POST parameter in pingTest PHP script. | |||||
| CVE-2017-11566 | 1 Appsec-labs | 1 Appuse | 2021-05-11 | 7.2 HIGH | 7.8 HIGH |
| AppUse 4.0 allows shell command injection via a proxy field. | |||||
| CVE-2021-21530 | 1 Dell | 1 Openmanage Enterprise-modular | 2021-05-10 | 6.5 MEDIUM | 8.8 HIGH |
| Dell OpenManage Enterprise-Modular (OME-M) versions prior to 1.30.00 contain a security bypass vulnerability. An authenticated malicious user with low privileges may potentially exploit the vulnerability to escape from the restricted environment and gain access to sensitive information in the system, resulting in information disclosure and elevation of privilege. | |||||
| CVE-2021-29147 | 1 Arubanetworks | 1 Clearpass | 2021-05-07 | 9.0 HIGH | 8.8 HIGH |
| A remote arbitrary command execution vulnerability was discovered in Aruba ClearPass Policy Manager version(s) prior to 6.9.5, 6.8.9, 6.7.14-HF1. Aruba has released patches for Aruba ClearPass Policy Manager that address this security vulnerability. | |||||
| CVE-2020-22000 | 1 Homeautomation Project | 1 Homeautomation | 2021-05-06 | 8.5 HIGH | 8.0 HIGH |
| HomeAutomation 3.3.2 suffers from an authenticated OS command execution vulnerability using custom command v0.1 plugin. This can be exploited with a CSRF vulnerability to execute arbitrary shell commands as the web user via the 'set_command_on' and 'set_command_off' POST parameters in '/system/systemplugins/customcommand/customcommand.plugin.php' by using an unsanitized PHP exec() function. | |||||
| CVE-2021-30166 | 1 Meritlilin | 82 P2g1022, P2g1022 Firmware, P2g1022x and 79 more | 2021-05-05 | 9.0 HIGH | 7.2 HIGH |
| The NTP Server configuration function of the IP camera device is not verified with special parameters. Remote attackers can perform a command Injection attack and execute arbitrary commands after logging in with the privileged permission. | |||||
| CVE-2021-20708 | 1 Nec | 6 Aterm Wf1200cr, Aterm Wf1200cr Firmware, Aterm Wg1200cr and 3 more | 2021-05-05 | 9.0 HIGH | 7.2 HIGH |
| NEC Aterm devices (Aterm WF1200CR firmware Ver1.3.2 and earlier, Aterm WG1200CR firmware Ver1.3.3 and earlier, and Aterm WG2600HS firmware Ver1.5.1 and earlier) allow authenticated attackers to execute arbitrary OS commands by sending a specially crafted request to a specific URL. | |||||
| CVE-2021-0265 | 1 Juniper | 1 Appformix | 2021-05-04 | 10.0 HIGH | 8.1 HIGH |
| An unvalidated REST API in the AppFormix Agent of Juniper Networks AppFormix allows an unauthenticated remote attacker to execute commands as root on the host running the AppFormix Agent, when certain preconditions are performed by the attacker, thus granting the attacker full control over the environment. This issue affects: Juniper Networks AppFormix 3 versions prior to 3.1.22, 3.2.14, 3.3.0. | |||||
| CVE-2021-20696 | 1 Dlink | 2 Dap-1880ac, Dap-1880ac Firmware | 2021-05-03 | 9.0 HIGH | 8.8 HIGH |
| DAP-1880AC firmware version 1.21 and earlier allows a remote authenticated attacker to execute arbitrary OS commands by sending a specially crafted request to a specific CGI program. | |||||
| CVE-2020-7034 | 1 Avaya | 1 Session Border Controller For Enterprise | 2021-04-30 | 9.0 HIGH | 8.8 HIGH |
| A command injection vulnerability in Avaya Session Border Controller for Enterprise could allow an authenticated, remote attacker to send specially crafted messages and execute arbitrary commands with the affected system privileges. Affected versions of Avaya Session Border Controller for Enterprise include 7.x, 8.0 through 8.1.1.x | |||||
| CVE-2021-27252 | 1 Netgear | 84 Br200, Br200 Firmware, Br500 and 81 more | 2021-04-27 | 8.3 HIGH | 8.8 HIGH |
| This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R7800 firmware version 1.0.2.76. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the vendor_specific DHCP opcode. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12216. | |||||
| CVE-2020-35578 | 1 Nagios | 1 Nagios Xi | 2021-04-26 | 9.0 HIGH | 7.2 HIGH |
| An issue was discovered in the Manage Plugins page in Nagios XI before 5.8.0. Because the line-ending conversion feature is mishandled during a plugin upload, a remote, authenticated admin user can execute operating-system commands. | |||||
| CVE-2019-8319 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv4Settings API function, as demonstrated by shell metacharacters in the Gateway field. | |||||
| CVE-2019-8318 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysEmailSettings API function, as demonstrated by shell metacharacters in the SMTPServerPort field. | |||||
| CVE-2019-8317 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteIPv6Settings API function, as demonstrated by shell metacharacters in the DestNetwork field. | |||||
| CVE-2019-8316 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWebFilterSettings API function, as demonstrated by shell metacharacters in the WebFilterURLs field. | |||||
| CVE-2019-8314 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetQoSSettings API function, as demonstrated by shell metacharacters in the IPAddress field. | |||||
| CVE-2019-8315 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv4FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv4AddressRangeStart field. | |||||
| CVE-2019-8313 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetIPv6FirewallSettings API function, as demonstrated by shell metacharacters in the SrcIPv6AddressRangeStart field. | |||||
| CVE-2019-8312 | 1 Dlink | 2 Dir-878, Dir-878 Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-878 devices with firmware 1.12A1. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the twsystem function with untrusted input from the request body for the SetSysLogSettings API function, as demonstrated by shell metacharacters in the IPAddress field. | |||||
| CVE-2019-13481 | 1 Dlink | 2 Dir-818lw, Dir-818lw Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the MTU field to SetWanSettings. | |||||
| CVE-2019-13482 | 1 Dlink | 2 Dir-818lw, Dir-818lw Firmware | 2021-04-23 | 9.0 HIGH | 8.8 HIGH |
| An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Type field to SetWanSettings. | |||||
| CVE-2016-11021 | 1 Dlink | 2 Dcs-930l, Dcs-930l Firmware | 2021-04-23 | 9.0 HIGH | 7.2 HIGH |
| setSystemCommand on D-Link DCS-930L devices before 2.12 allows a remote attacker to execute code via an OS command in the SystemCommand parameter. | |||||
| CVE-2021-27249 | 1 D-link | 2 Dap-2020, Dap-2020 Firmware | 2021-04-22 | 8.3 HIGH | 8.8 HIGH |
| This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DAP-2020 v1.01rc001 Wi-Fi access points. Authentication is not required to exploit this vulnerability. The specific flaw exists within the processing of CGI scripts. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-11369. | |||||
| CVE-2017-16921 | 2 Debian, Otrs | 2 Debian Linux, Otrs | 2021-04-22 | 9.0 HIGH | 8.8 HIGH |
| In OTRS 6.0.x up to and including 6.0.1, OTRS 5.0.x up to and including 5.0.24, and OTRS 4.0.x up to and including 4.0.26, an attacker who is logged into OTRS as an agent can manipulate form parameters (related to PGP) and execute arbitrary shell commands with the permissions of the OTRS or web server user. | |||||
| CVE-2021-29379 | 1 Dlink | 2 Dir-802, Dir-802 Firmware | 2021-04-19 | 5.8 MEDIUM | 8.8 HIGH |
| ** UNSUPPORTED WHEN ASSIGNED ** An issue was discovered on D-Link DIR-802 A1 devices through 1.00b05. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. | |||||
| CVE-2019-15949 | 1 Nagios | 1 Nagios Xi | 2021-04-15 | 9.0 HIGH | 8.8 HIGH |
| Nagios XI before 5.6.6 allows remote command execution as root. The exploit requires access to the server as the nagios user, or access as the admin user via the web interface. The getprofile.sh script, invoked by downloading a system profile (profile.php?cmd=download), is executed as root via a passwordless sudo entry; the script executes check_plugin, which is owned by the nagios user. A user logged into Nagios XI with permissions to modify plugins, or the nagios user on the server, can modify the check_plugin executable and insert malicious commands to execute as root. | |||||
| CVE-2020-21883 | 1 Indionetworks | 10 Unibox U1000, Unibox U1000 Firmware, Unibox U2500 and 7 more | 2021-04-14 | 9.0 HIGH | 8.8 HIGH |
| Unibox U-50 2.4 and UniBox Enterprise Series 2.4 and UniBox Campus Series 2.4 contain a OS command injection vulnerability in /tools/ping, which can leads to complete device takeover. | |||||
| CVE-2021-28204 | 1 Asus | 6 Asmb8-ikvm, Asmb8-ikvm Firmware, Z10pe-d16 Ws and 3 more | 2021-04-14 | 6.5 MEDIUM | 7.2 HIGH |
| The specific function in ASUS BMC’s firmware Web management page (Modify user’s information function) does not filter the specific parameter. As obtaining the administrator permission, remote attackers can launch command injection to execute command arbitrary. | |||||
| CVE-2021-28203 | 1 Asus | 6 Asmb8-ikvm, Asmb8-ikvm Firmware, Z10pe-d16 Ws and 3 more | 2021-04-14 | 6.5 MEDIUM | 7.2 HIGH |
| The Web Set Media Image function in ASUS BMC’s firmware Web management page does not filter the specific parameter. As obtaining the administrator permission, remote attackers can launch command injection to execute command arbitrary. | |||||
| CVE-2018-9276 | 1 Paessler | 1 Prtg Network Monitor | 2021-04-12 | 9.0 HIGH | 7.2 HIGH |
| An issue was discovered in PRTG Network Monitor before 18.2.39. An attacker who has access to the PRTG System Administrator web console with administrative privileges can exploit an OS command injection vulnerability (both on the server and on devices) by sending malformed parameters in sensor or notification management scenarios. | |||||
| CVE-2021-29083 | 1 Synology | 1 Diskstation Manager | 2021-04-07 | 9.0 HIGH | 7.2 HIGH |
| Improper neutralization of special elements used in an OS command in SYNO.Core.Network.PPPoE in Synology DiskStation Manager (DSM) before 6.2.3-25426-3 allows remote authenticated users to execute arbitrary code via realname parameter. | |||||
| CVE-2019-11539 | 1 Pulsesecure | 2 Pulse Connect Secure, Pulse Policy Secure | 2021-04-06 | 6.5 MEDIUM | 7.2 HIGH |
| In Pulse Secure Pulse Connect Secure version 9.0RX before 9.0R3.4, 8.3RX before 8.3R7.1, 8.2RX before 8.2R12.1, and 8.1RX before 8.1R15.1 and Pulse Policy Secure version 9.0RX before 9.0R3.2, 5.4RX before 5.4R7.1, 5.3RX before 5.3R12.1, 5.2RX before 5.2R12.1, and 5.1RX before 5.1R15.1, the admin web interface allows an authenticated attacker to inject and execute commands. | |||||
| CVE-2021-21412 | 1 \@thi.ng\/egf Project | 1 \@thi.ng\/egf | 2021-04-02 | 6.5 MEDIUM | 8.8 HIGH |
| Potential for arbitrary code execution in npm package @thi.ng/egf `#gpg`-tagged property values (only if `decrypt: true` option is enabled). PR with patch has been submitted and will has been released as of v0.4.0 By default the EGF parse functions do NOT attempt to decrypt values (since GPG only available in non-browser env). However, if GPG encrypted values are used/required: 1. Perform a regex search for `#gpg`-tagged values in the EGF source file/string and check for backtick (\`) chars in the encrypted value string 2. Replace/remove them or skip parsing if present. | |||||
| CVE-2021-27273 | 1 Netgear | 1 Prosafe Network Management System | 2021-03-30 | 9.0 HIGH | 8.8 HIGH |
| This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System 1.6.0.26. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the SettingConfigController class. When parsing the fileName parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-12121. | |||||
| CVE-2021-20682 | 1 Basercms | 1 Basercms | 2021-03-29 | 9.0 HIGH | 7.2 HIGH |
| baserCMS versions prior to 4.4.5 allows a remote attacker with an administrative privilege to execute arbitrary OS commands via unspecified vectors. | |||||
| CVE-2020-10583 | 1 Invigo | 1 Automatic Device Management | 2021-03-27 | 9.0 HIGH | 8.8 HIGH |
| The /admin/admapi.php script of Invigo Automatic Device Management (ADM) through 5.0 allows remote authenticated attackers to execute arbitrary OS commands on the server as the user running the application. | |||||
| CVE-2021-21315 | 2 Apache, Systeminformation | 2 Cordova, Systeminformation | 2021-03-25 | 4.6 MEDIUM | 7.8 HIGH |
| The System Information Library for Node.JS (npm package "systeminformation") is an open source collection of functions to retrieve detailed hardware, system and OS information. In systeminformation before version 5.3.1 there is a command injection vulnerability. Problem was fixed in version 5.3.1. As a workaround instead of upgrading, be sure to check or sanitize service parameters that are passed to si.inetLatency(), si.inetChecksite(), si.services(), si.processLoad() ... do only allow strings, reject any arrays. String sanitation works as expected. | |||||
| CVE-2020-27861 | 1 Netgear | 71 Cbk40, Cbk40 Firmware, Cbk43 and 68 more | 2021-03-23 | 8.3 HIGH | 8.8 HIGH |
| This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR Orbi 2.5.1.16 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the UA_Parser utility. A crafted Host Name option in a DHCP request can trigger execution of a system call composed from a user-supplied string. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-11076. | |||||
| CVE-2021-20017 | 1 Sonicwall | 2 Sma100, Sma100 Firmware | 2021-03-19 | 9.0 HIGH | 8.8 HIGH |
| A post-authenticated command injection vulnerability in SonicWall SMA100 allows an authenticated attacker to execute OS commands as a 'nobody' user. This vulnerability impacts SMA100 version 10.2.0.5 and earlier. | |||||
| CVE-2021-27256 | 1 Netgear | 86 Br200, Br200 Firmware, Br500 and 83 more | 2021-03-16 | 8.3 HIGH | 8.8 HIGH |
| This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of NETGEAR R7800 firmware version 1.0.2.76. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of the rc_service parameter provided to apply_save.cgi. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-12355. | |||||
| CVE-2021-21503 | 1 Dell | 1 Emc Powerscale Onefs | 2021-03-12 | 4.6 MEDIUM | 7.8 HIGH |
| PowerScale OneFS 8.1.2,8.2.2 and 9.1.0 contains an improper input sanitization issue in a command. The Compadmin user could potentially exploit this vulnerability, leading to potential privileges escalation. | |||||
| CVE-2021-3291 | 1 Zen-cart | 1 Zen Cart | 2021-03-09 | 9.0 HIGH | 7.2 HIGH |
| Zen Cart 1.5.7b allows admins to execute arbitrary OS commands by inspecting an HTML radio input element (within the modules edit page) and inserting a command. | |||||
| CVE-2021-26704 | 1 Eprints | 1 Eprints | 2021-03-04 | 6.5 MEDIUM | 8.8 HIGH |
| EPrints 3.4.2 allows remote attackers to execute arbitrary commands via crafted input to the verb parameter in a cgi/toolbox/toolbox URI. | |||||
| CVE-2021-26724 | 1 Nozominetworks | 2 Central Management Control, Guardian | 2021-02-26 | 9.0 HIGH | 7.2 HIGH |
| OS Command Injection vulnerability when changing date settings or hostname using web GUI of Nozomi Networks Guardian and CMC allows authenticated administrators to perform remote code execution. This issue affects: Nozomi Networks Guardian 20.0.7.3 version 20.0.7.3 and prior versions. Nozomi Networks CMC 20.0.7.3 version 20.0.7.3 and prior versions. | |||||