Filtered by vendor D-link
Subscribe
Search
Total
65 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-44928 | 1 D-link | 2 Dvg-g5402sp, Dvg-g5402sp Firmware | 2023-08-08 | N/A | 9.8 CRITICAL |
| D-Link DVG-G5402SP GE_1.03 was discovered to contain a command injection vulnerability via the Maintenance function. | |||||
| CVE-2022-44929 | 1 D-link | 2 Dvg-g5402sp, Dvg-g5402sp Firmware | 2023-08-08 | N/A | 9.8 CRITICAL |
| An access control issue in D-Link DVG-G5402SP GE_1.03 allows unauthenticated attackers to escalate privileges via arbitrarily editing VoIP SIB profiles. | |||||
| CVE-2020-29557 | 1 D-link | 6 Dir-825, Dir-825\/a, Dir-825\/ac and 3 more | 2022-07-12 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-825 R1 devices through 3.0.1 before 2020-11-20. A buffer overflow in the web interface allows attackers to achieve pre-authentication remote code execution. | |||||
| CVE-2019-18666 | 1 D-link | 2 Dap-1360 Revision F, Dap-1360 Revision F Firmware | 2021-07-21 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DAP-1360 revision F devices. Remote attackers can start a telnet service without authorization via an undocumented HTTP request. Although this is the primary vulnerability, the impact depends on the firmware version. Versions 609EU through 613EUbeta were tested. Versions through 6.12b01 have weak root credentials, allowing an attacker to gain remote root access. After 6.12b01, the root credentials were changed but the telnet service can still be started without authorization. | |||||
| CVE-2020-15892 | 1 D-link | 2 Dap-1520, Dap-1520 Firmware | 2021-07-21 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user. | |||||
| CVE-2021-26709 | 1 D-link | 1 Dsl-320b-d1 | 2021-04-20 | 10.0 HIGH | 9.8 CRITICAL |
| ** UNSUPPORTED WHEN ASSIGNED ** D-Link DSL-320B-D1 devices through EU_1.25 are prone to multiple Stack-Based Buffer Overflows that allow unauthenticated remote attackers to take over a device via the login.xgi user and pass parameters. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. | |||||
| CVE-2019-6258 | 1 D-link | 2 Dir-822, Dir-822 Firmware | 2020-08-25 | 7.5 HIGH | 9.8 CRITICAL |
| D-Link DIR-822 Rev.Bx devices with firmware v.202KRb06 and older allow a buffer overflow via long MacAddress data in a /HNAP1/SetClientInfo HNAP protocol message, which is mishandled in /usr/sbin/udhcpd during reading of the /var/servd/LAN-1-udhcpd.conf file. | |||||
| CVE-2018-17067 | 1 D-link | 2 Dir-816 A2, Dir-816 A2 Firmware | 2020-08-24 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. A very long password to /goform/formLogin could lead to a stack-based buffer overflow and overwrite the return address. | |||||
| CVE-2018-11013 | 1 D-link | 2 Dir-816 A2, Dir-816 A2 Firmware | 2020-08-24 | 10.0 HIGH | 9.8 CRITICAL |
| Stack-based buffer overflow in the websRedirect function in GoAhead on D-Link DIR-816 A2 (CN) routers with firmware version 1.10B05 allows unauthenticated remote attackers to execute arbitrary code via a request with a long HTTP Host header. | |||||
| CVE-2019-9125 | 1 D-link | 2 Dir-878, Dir-878 Firmware | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-878 1.12B01 devices. Because strncpy is misused, there is a stack-based buffer overflow vulnerability that does not require authentication via the HNAP_AUTH HTTP header. | |||||
| CVE-2019-9124 | 1 D-link | 2 Dir-878, Dir-878 Firmware | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-878 1.12B01 devices. At the /HNAP1 URI, an attacker can log in with a blank password. | |||||
| CVE-2019-9123 | 1 D-link | 2 Dir-825 Rev.b, Dir-825 Rev.b Firmware | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. The "user" account has a blank password. | |||||
| CVE-2018-20305 | 1 D-link | 2 Dir-816 A2, Dir-816 A2 Firmware | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| D-Link DIR-816 A2 1.10 B05 devices allow arbitrary remote code execution without authentication via the newpass parameter. In the /goform/form2userconfig.cgi handler function, a long password may lead to a stack-based buffer overflow and overwrite a return address. | |||||
| CVE-2018-20056 | 1 D-link | 4 Dir-605l, Dir-605l Firmware, Dir-619l and 1 more | 2020-08-24 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered in /bin/boa on D-Link DIR-619L Rev.B 2.06B1 and DIR-605L Rev.B 2.12B1 devices. There is a stack-based buffer overflow allowing remote attackers to execute arbitrary code without authentication via the goform/formLanguageChange currTime parameter. | |||||
| CVE-2018-17065 | 1 D-link | 2 Dir-816 A2, Dir-816 A2 Firmware | 2020-08-24 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. Within the handler function of the /goform/DDNS route, a very long password could lead to a stack-based buffer overflow and overwrite the return address. | |||||
| CVE-2020-15893 | 1 D-link | 2 Dir-816l, Dir-816l Firmware | 2020-07-24 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-816L devices 2.x before 1.10b04Beta02. Universal Plug and Play (UPnP) is enabled by default on port 1900. An attacker can perform command injection by injecting a payload into the Search Target (ST) field of the SSDP M-SEARCH discover packet. | |||||
| CVE-2020-6841 | 1 D-link | 2 Dch-m225, Dch-m225 Firmware | 2020-02-25 | 10.0 HIGH | 9.8 CRITICAL |
| D-Link DCH-M225 1.05b01 and earlier devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the spotifyConnect.php userName parameter. | |||||
| CVE-2013-7052 | 1 D-link | 2 Dir-100, Dir-100 Firmware | 2020-02-04 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DIR-100 4.03B07: security bypass via an error in the cliget.cgi script | |||||
| CVE-2013-7055 | 1 D-link | 2 Dir-100, Dir-100 Firmware | 2020-02-04 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DIR-100 4.03B07 has PPTP and poe information disclosure | |||||
| CVE-2013-4857 | 1 D-link | 2 Dir-865l, Dir-865l Firmware | 2019-10-28 | 7.5 HIGH | 9.8 CRITICAL |
| D-Link DIR-865L has PHP File Inclusion in the router xml file. | |||||
| CVE-2017-3191 | 1 D-link | 4 Dir-130, Dir-130 Firmware, Dir-330 and 1 more | 2019-10-09 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 are vulnerable to authentication bypass of the remote login page. A remote attacker that can access the remote management login page can manipulate the POST request in such a manner as to access some administrator-only pages such as tools_admin.asp without credentials. | |||||
| CVE-2017-3192 | 1 D-link | 4 Dir-130, Dir-130 Firmware, Dir-330 and 1 more | 2019-10-09 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DIR-130 firmware version 1.23 and DIR-330 firmware version 1.12 do not sufficiently protect administrator credentials. The tools_admin.asp page discloses the administrator password in base64 encoding in the returned web page. A remote attacker with access to this page (potentially through a authentication bypass such as CVE-2017-3191) may obtain administrator credentials for the device. | |||||
| CVE-2018-19987 | 1 D-link | 12 Dir-818lw, Dir-818lw Firmware, Dir-822 and 9 more | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| D-Link DIR-822 Rev.B 202KRb06, DIR-822 Rev.C 3.10B06, DIR-860L Rev.B 2.03.B03, DIR-868L Rev.B 2.05B02, DIR-880L Rev.A 1.20B01_01_i3se_BETA, and DIR-890L Rev.A 1.21B02_BETA devices mishandle IsAccessPoint in /HNAP1/SetAccessPointMode. In the SetAccessPointMode.php source code, the IsAccessPoint parameter is saved in the ShellPath script file without any regex checking. After the script file is executed, the command injection occurs. A vulnerable /HNAP1/SetAccessPointMode XML message could have shell metacharacters in the IsAccessPoint element such as the `telnetd` string. | |||||
| CVE-2017-14417 | 1 D-link | 2 Dir-850l, Dir-850l Firmware | 2019-10-03 | 7.5 HIGH | 9.8 CRITICAL |
| register_send.php on D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices does not require authentication, which can result in unintended enrollment in mydlink Cloud Services. | |||||
| CVE-2018-10824 | 1 D-link | 16 Dir-140l, Dir-140l Firmware, Dir-640l and 13 more | 2019-10-03 | 5.0 MEDIUM | 9.8 CRITICAL |
| An issue was discovered on D-Link DWR-116 through 1.06, DIR-140L through 1.02, DIR-640L through 1.02, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. The administrative password is stored in plaintext in the /tmp/csman/0 file. An attacker having a directory traversal (or LFI) can easily get full router access. | |||||
| CVE-2018-10968 | 1 D-link | 4 Dir-550a, Dir-550a Firmware, Dir-604m and 1 more | 2019-10-03 | 7.5 HIGH | 9.8 CRITICAL |
| On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can use a default TELNET account to get unauthorized access to vulnerable devices, aka a backdoor access vulnerability. | |||||
| CVE-2018-14081 | 1 D-link | 4 Dir-809, Dir-809 A1 Firmware, Dir-809 A2 Firmware and 1 more | 2019-10-03 | 5.0 MEDIUM | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-809 A1 through 1.09, A2 through 1.11, and Guest Zone through 1.09 devices. Device passwords, such as the admin password and the WPA key, are stored in cleartext. | |||||
| CVE-2018-17063 | 1 D-link | 2 Dir-816 A2, Dir-816 A2 Firmware | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/NTPSyncWithHost route. This could lead to command injection via shell metacharacters. | |||||
| CVE-2018-17064 | 1 D-link | 2 Dir-816 A2, Dir-816 A2 Firmware | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction within the handler function of the /goform/sylogapply route. This could lead to command injection via the syslogIp parameter after /goform/clearlog is invoked. | |||||
| CVE-2018-17066 | 1 D-link | 2 Dir-816 A2, Dir-816 A2 Firmware | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/form2systime.cgi route. This could lead to command injection via shell metacharacters in the datetime parameter. | |||||
| CVE-2018-17068 | 1 D-link | 2 Dir-816 A2, Dir-816 A2 Firmware | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-816 A2 1.10 B05 devices. An HTTP request parameter is used in command string construction in the handler function of the /goform/Diagnosis route. This could lead to command injection via shell metacharacters in the sendNum parameter. | |||||
| CVE-2018-17786 | 1 D-link | 2 Dir-823g, Dir-823g Firmware | 2019-10-03 | 7.5 HIGH | 9.8 CRITICAL |
| On D-Link DIR-823G devices, ExportSettings.sh, upload_settings.cgi, GetDownLoadSyslog.sh, and upload_firmware.cgi do not require authentication, which allows remote attackers to execute arbitrary code. | |||||
| CVE-2018-17787 | 1 D-link | 2 Dir-823g, Dir-823g Firmware | 2019-10-03 | 7.5 HIGH | 9.8 CRITICAL |
| On D-Link DIR-823G devices, the GoAhead configuration allows /HNAP1 Command Injection via shell metacharacters in the POST data, because this data is sent directly to the "system" library function. | |||||
| CVE-2018-19988 | 1 D-link | 2 Dir-868l, Dir-868l Firmware | 2019-10-03 | 7.5 HIGH | 9.8 CRITICAL |
| In the /HNAP1/SetClientInfoDemo message, the AudioMute and AudioEnable parameters are vulnerable, and the vulnerabilities affect D-Link DIR-868L Rev.B 2.05B02 devices. In the SetClientInfoDemo.php source code, the AudioMute and AudioEnble parameters are saved in the ShellPath script file without any regex checking. After the script file is executed, the command injection occurs. It needs to bypass the wget command option with a single quote. A vulnerable /HNAP1/SetClientInfoDemo XML message could have single quotes and backquotes in the AudioMute or AudioEnable element, such as the '`telnetd`' string. | |||||
| CVE-2018-19986 | 1 D-link | 4 Dir-818lw, Dir-818lw Firmware, Dir-822 and 1 more | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| In the /HNAP1/SetRouterSettings message, the RemotePort parameter is vulnerable, and the vulnerability affects D-Link DIR-818LW Rev.A 2.05.B03 and DIR-822 B1 202KRb06 devices. In the SetRouterSettings.php source code, the RemotePort parameter is saved in the $path_inf_wan1."/web" internal configuration memory without any regex checking. And in the IPTWAN_build_command function of the iptwan.php source code, the data in $path_inf_wan1."/web" is used with the iptables command without any regex checking. A vulnerable /HNAP1/SetRouterSettings XML message could have shell metacharacters in the RemotePort element such as the `telnetd` string. | |||||
| CVE-2018-19989 | 1 D-link | 2 Dir-822, Dir-822 Firmware | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| In the /HNAP1/SetQoSSettings message, the uplink parameter is vulnerable, and the vulnerability affects D-Link DIR-822 Rev.B 202KRb06 and DIR-822 Rev.C 3.10B06 devices. In the SetQoSSettings.php source code, the uplink parameter is saved in the /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth internal configuration memory without any regex checking. And in the bwc_tc_spq_start, bwc_tc_wfq_start, and bwc_tc_adb_start functions of the bwcsvcs.php source code, the data in /bwc/entry:1/bandwidth and /bwc/entry:2/bandwidth is used with the tc command without any regex checking. A vulnerable /HNAP1/SetQoSSettings XML message could have shell metacharacters in the uplink element such as the `telnetd` string. | |||||
| CVE-2018-19990 | 1 D-link | 2 Dir-822, Dir-822 Firmware | 2019-10-03 | 10.0 HIGH | 9.8 CRITICAL |
| In the /HNAP1/SetWiFiVerifyAlpha message, the WPSPIN parameter is vulnerable, and the vulnerability affects D-Link DIR-822 B1 202KRb06 devices. In the SetWiFiVerifyAlpha.php source code, the WPSPIN parameter is saved in the $rphyinf1."/media/wps/enrollee/pin" and $rphyinf2."/media/wps/enrollee/pin" and $rphyinf3."/media/wps/enrollee/pin" internal configuration memory without any regex checking. And in the do_wps function of the wps.php source code, the data in $rphyinf3."/media/wps/enrollee/pin" is used with the wpatalk command without any regex checking. A vulnerable /HNAP1/SetWiFiVerifyAlpha XML message could have shell metacharacters in the WPSPIN element such as the `telnetd` string. | |||||
| CVE-2018-20389 | 1 D-link | 4 Dcm-604, Dcm-604 Firmware, Dcm-704 and 1 more | 2019-10-03 | 5.0 MEDIUM | 9.8 CRITICAL |
| D-Link DCM-604 DCM604_C1_ViaCabo_1.04_20130606 and DCM-704 EU_DCM-704_1.10 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests. | |||||
| CVE-2017-8408 | 1 D-link | 2 Dcs-1130, Dcs-1130 Firmware | 2019-07-08 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the GET parameters passed in this request (to test if SMB credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "cgibox" is the one that has the vulnerable function "sub_7EAFC" that receives the values sent by the GET request. If we open this binary in IDA-pro we will notice that this follows a ARM little endian format. The function sub_7EAFC in IDA pro is identified to be receiving the values sent in the GET request and the value set in GET parameter "user" is extracted in function sub_7E49C which is then passed to the vulnerable system API call. | |||||
| CVE-2018-19300 | 1 D-link | 16 Dap-1530, Dap-1530 Firmware, Dap-1610 and 13 more | 2019-04-12 | 10.0 HIGH | 9.8 CRITICAL |
| On D-Link DAP-1530 (A1) before firmware version 1.06b01, DAP-1610 (A1) before firmware version 1.06b01, DWR-111 (A1) before firmware version 1.02v02, DWR-116 (A1) before firmware version 1.06b03, DWR-512 (B1) before firmware version 2.02b01, DWR-711 (A1) through firmware version 1.11, DWR-712 (B1) before firmware version 2.04b01, DWR-921 (A1) before firmware version 1.02b01, and DWR-921 (B1) before firmware version 2.03b01, there exists an EXCU_SHELL file in the web directory. By sending a GET request with specially crafted headers to the /EXCU_SHELL URI, an attacker could execute arbitrary shell commands in the root context on the affected device. Other devices might be affected as well. | |||||
| CVE-2014-7859 | 1 D-link | 10 Dnr-320l, Dnr-320l Firmware, Dnr-326 and 7 more | 2019-03-19 | 7.5 HIGH | 9.8 CRITICAL |
| Stack-based buffer overflow in login_mgr.cgi in D-Link firmware DNR-320L and DNS-320LW before 1.04b08, DNR-322L before 2.10 build 03, DNR-326 before 2.10 build 03, and DNS-327L before 1.04b01 allows remote attackers to execute arbitrary code by crafting malformed "Host" and "Referer" header values. | |||||
| CVE-2019-7297 | 1 D-link | 2 Dir-823g, Dir-823g Firmware | 2019-02-19 | 10.0 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link DIR-823G devices with firmware through 1.02B03. A command Injection vulnerability allows attackers to execute arbitrary OS commands via shell metacharacters in a crafted /HNAP1 request. This occurs when the GetNetworkTomographyResult function calls the system function with an untrusted input parameter named Address. Consequently, an attacker can execute any command remotely when they control this input. | |||||
| CVE-2018-17881 | 1 D-link | 2 Dir-823g, Dir-823g Firmware | 2018-12-17 | 5.0 MEDIUM | 9.8 CRITICAL |
| On D-Link DIR-823G 2018-09-19 devices, the GoAhead configuration allows /HNAP1 SetPasswdSettings commands without authentication to trigger an admin password change. | |||||
| CVE-2018-17440 | 1 D-link | 1 Central Wifimanager | 2018-11-23 | 7.5 HIGH | 9.8 CRITICAL |
| An issue was discovered on D-Link Central WiFi Manager before v 1.03r0100-Beta1. They expose an FTP server that serves by default on port 9000 and has hardcoded credentials (admin, admin). Taking advantage of this, a remote unauthenticated attacker could execute arbitrary PHP code by uploading any file in the web root directory and then accessing it via a request. | |||||
| CVE-2014-7858 | 1 D-link | 2 Dnr-326, Dnr-326 Firmware | 2018-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| The check_login function in D-Link DNR-326 before 2.10 build 03 allows remote attackers to bypass authentication and log in by setting the username cookie parameter to an arbitrary string. | |||||
| CVE-2014-7857 | 1 D-link | 14 Dnr-326, Dnr-326 Firmware, Dns-320b and 11 more | 2018-10-09 | 10.0 HIGH | 9.8 CRITICAL |
| D-Link DNS-320L firmware before 1.04b12, DNS-327L before 1.03b04 Build0119, DNR-326 1.40b03, DNS-320B 1.02b01, DNS-345 1.03b06, DNS-325 1.05b03, and DNS-322L 2.00b07 allow remote attackers to bypass authentication and log in with administrator permissions by passing the cgi_set_wto command in the cmd parameter, and setting the spawned session's cookie to username=admin. | |||||
| CVE-2018-6213 | 1 D-link | 2 Dir-620, Dir-620 Firmware | 2018-08-11 | 10.0 HIGH | 9.8 CRITICAL |
| In the web server on D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, there is a hardcoded password of anonymous for the admin account. | |||||
| CVE-2018-8898 | 1 D-link | 2 Dsl-3782, Dsl-3782 Firmware | 2018-07-02 | 7.5 HIGH | 9.8 CRITICAL |
| A flaw in the authentication mechanism in the Login Panel of router D-Link DSL-3782 (A1_WI_20170303 || SWVer="V100R001B012" FWVer="3.10.0.24" FirmVer="TT_77616E6771696F6E67") allows unauthenticated attackers to perform arbitrary modification (read, write) to passwords and configurations meanwhile an administrator is logged into the web panel. | |||||
| CVE-2018-10996 | 1 D-link | 2 Dir-629-b, Dir-629-b Firmware | 2018-06-18 | 10.0 HIGH | 9.8 CRITICAL |
| The weblogin_log function in /htdocs/cgibin on D-Link DIR-629-B1 devices allows attackers to execute arbitrary code or cause a denial of service (buffer overflow) via a session.cgi?ACTION=logout request involving a long REMOTE_ADDR environment variable. | |||||
| CVE-2018-9284 | 1 D-link | 2 Dir-868l, Singapore Starhub Firmware | 2018-05-22 | 10.0 HIGH | 9.8 CRITICAL |
| authentication.cgi on D-Link DIR-868L devices with Singapore StarHub firmware before v1.21SHCb03 allows remote attackers to execute arbitrary code. | |||||